Motors - Strona 16
Micro motor N20-BT44 250:1 90RPM - 6V
The N20 series miniature motor with 250:1 gearing, has 90 RPM, torque is equal to 3 kg*cm (0.294 Nm). The supply voltage is 6 volts.Stepper Motor JK57HS76-2804 200 steps/rot 3V / 2,8A / 1,89Nm
JK57HS76-2804 bipolar four-wire stepper motor with 200 steps per revolution (1.8 degrees). It is powered by 3 V, draws 2800 mA per coil. Torque is 19.0 kg*cm (1.89 Nm)....Stepper Motor SY35ST28-0504A 200 steps 10V / 0,5A / 0,1Nm - Pololu 1208
Bipolar stepper motor 200 steps (1.8 °) 10 V supply with 500 mA current per coil, holding torque 1 kg*cm (0.1 Nm). Dimensions: 35 x 35 x 28 mm (NEMA 14).Stepper motor JK42HS60-1704A 200 steps 5V/1.7A/0.66Nm
Bipolar stepper motor, four wire. It has a resolution of 200 steps per revolution (1.8 degrees) . It is powered by 5.0 V and draws 1700 mA per coil. The torque is 6.8 kg*cm...Grove - vibration motor + module
The module contains a miniature DC vibrating motor. It is very easy to use and is equipped with Grove interface which makes it easy to connect it with Arduino and Raspberry Pi.Stepper Motor JK28HS32-0674 200 steps 3,8V/0,67A/0,06Nm
Bipolar stepper motor , four-wire. Has a resolution of 200 steps per revolution (1.8 degrees). It is powered by 3.6 V, draws 670 mA per coil. Torque is 0.6 kg*cm (0.06 Nm)....DC 12V 240RPM L-type motor with metal gearbox - magnetic Hall encoder - Waveshare 22346
DC motor - L- shaped gear motor. Equipped with gears with metal gears and a magnetic Hall encoder . The module does not have a self-braking function, and the motor...NEMA 34 - L-type Step Motor Mount - 100x100mm
NEMA 34 standard stepper motor mount . The mount has universal mounting holes for most NEMA 34 standard motors. Mounting screws will be required for motor mounting , which...Stepper Motor JK28HS45-0674 200 steps 4,5V/0,67A/0,09Nm
Bipolar stepper motor , four-wire. Has a resolution of 200 steps per revolution (1.8 degrees). It is powered by 4.5 V, draws 670 mA per coil. Torque is 0.95 kg*cm (0.09 Nm)....Micro motor N20-BT33 250:1 50RPM - 9V
The N20 series miniature motor with 250:1 gearing, has 50 RPM , and torque is 2.3 kg*cm (0.226 Nm) . The supply voltage ranges from 3 V to 9 V.37Dx54L Motor with 50:1 Gear 24V 200RPM - Pololu 4683
Polol's DC motor with a 50:1 gearbox. Powered by 12 to 24 volts , its speed is 200 rpm and its torque is 23 kg*cm . It consumes an average of up to 100 mA of current, while...25Dx54L HP Motor with 75:1 Gear 6V 130RPM - Pololu 1575
Polol's 75:1 gearbox motor generates 130 rpm, torque is 9.4 kg*cm (0.93 Nm). Powered by 6 V, the average current consumption is approximately 450 mA (max. 6000 mA).- EOL
DC Motor with Gear 6V 300RPM + encoder
Motor with 20:1 gearing , 300 rpm , 3.6 kg*cm (0.35 Nm) torque. DC current is 2.7 A. The device has a quadrature encoder with a resolution of 11 pulses per revolution (after...DFRobot Gravity - DC motor + propeller module
Module with DC motor and built-in transistor, it does not require an additional driver. Control is via PWM signal. It has a connector adapted to DFRobot IO Expansion Shield.19:1 Metal Gearmotor 12V 37Dx68Lmm with 64 CPR Encoder - Pololu 4751
Polol's engine with 19:1 gearbox generates 530 rpm, torque is 8 kg*cm. The motor is powered by 12 V and the average current consumption is about 200 mA. The motor is...DFRobot Gravity - vibration motor module
Module from the Gravity series with vibration motor for Arduino controlled with the PWM signal, low and high status. The supply voltage is 5 V.Redox DC Motor 6V 15000RPM 0,05Nm
Brush motor providing a torque of 0.525 kg*cm (0.05 Nm) . The supply voltage is 6 V and the speed is 15000 rpm.Stepper Motor 42HM48-1206 400 steps 4,0V / 1,2A / 0,31Nm
Unipolar stepper motor, six wire. It has a resolution of 400 steps per revolution (0.9 degrees) . It is powered by 4.0 V and draws 1200 mA per coil. The torque is 3.17 kg*cm...Linear Actuator LD1 32N 30mm/s 12V - 10cm stroke
Electric actuator with a load capacity of up to 3.2 kg (32 N), supplied with 12 V. It operates at a speed of 30 mm/sec and has a maximum extension of 10 cm. It has a...DC motor with 60:1 gear 6V 100RPM
DC motor with 60:1 gear ratio. It is powered with a voltage of 6 V with an average current consumption of 66 mA. It generates 100 revolutions per minute , its torque is 5.8...25Dx48L Motor with 227:1 Gear 12V 33RPM - Pololu 3233
Polol's engine with a 227:1 transmission generates 33 rpm , torque is 23 kg*cm (2.25 Nm). The motor is supplied with 12V at an average current consumption of 200mA without...DC Motor with Gear 6V 100RPM + encoder
Motor with 75:1 gearing, 100 rpm , 6.5 kg*cm (0.64 Nm) torque. DC current is 3.0 A. The device has a quadrature encoder with a resolution of 11 pulses per revolution (after...