- Reduced price
- Sale
- Reduced price
- Sale
- Reduced price
- Sale
- Reduced price
- Sale
List of products by brand MSX Elektronika - Strona 2
Loading...
Connector IDC10 for the contact plate
Connector allows for connecting the IDC10 ribbon for standard beadboards (prototype) with the pitch of 2.54 mm.
Index: MOD-01745
Index: MOD-01745
Cable IDC 40 pin female-female 15 cm Raspberry Pi 4B/3B+/3B/2B
Female cable 15 cm long terminated with 40-pin IDC raster 2.54 mm (goldpin standard) connectors , matching Raspberry Pi 4B / 3B+ / 3B / 2B.
Index: KAB-03618
Index: KAB-03618
Module ProtoPi Plus - extension for Raspberry Pi 4/3/2/B + to breadboard + ribbon wire
The module provides easy connection of all GPIO leads of the Raspberry minicomputer, version 4, 3, 2 and B+ with any breadboard, no soldering needed.
Index: MOD-02607
Index: MOD-02607
HeadAmp 2016 set + Noise Reduction
Headphone amplifier is an official product of YouTube channel Noise Reducer. The kit contains a main board with soldered SMD components and a set of THT components for...
Index: MSX-07507
Index: MSX-07507
Universal board small 210 holes - MSX
A universal board with a connection layout in accordance with the contact plate. The module allows to transfer and solder the prototype system from the contact plate while...
Index: MSX-06120
Index: MSX-06120
Universal board medium 420 holes - MSX
A universal tile with a connection layout in line with the popular 400 field contact tile. The module allows the transfer and soldering of the prototype system from the contact...
Index: MSX-06119
Index: MSX-06119
ProtoPi Plus Side - extension GPIO Raspberry Pi 4/3/2/B for breadboard + tape
The module allows you to connect the GPIO leads of the Raspberry Pi 4, 3, 2 and B plus minicomputer to popular 830-hole contact boards using the included 40-wire tape. The...
Index: MSX-02927
Index: MSX-02927
Connector ARK4 connect wires to the breadboard with screw connectors. Suitable for standard breadboards available in our store.
Index: MOD-01469
Index: MOD-01469
Socket DC 2,5/5,5mm for the prototype contact plate
Connector suitable for standard prototypes of the breadboard with a pitch of 2.54 mm. the module allows to connect the power supply with the plug of 2.5/5.5 mm.
Index: MOD-01610
Index: MOD-01610
Logic level converter 3,3V / 5V - I2C UART SPI
The module allows to exchange data between systems that use two popular voltages: 3.3 V and 5 V. It provides connection of interfaces: UART, SPI and I2C.
Index: MOD-01513
Index: MOD-01513
4-channel logic level converter
The module allows to exchange data between systems that use the most popular levels of voltage: 5 V <-> 3.3 V and 3.3 V <-> 1,8 V. It works in both directions simulatneously....
Index: MSX-06117
Index: MSX-06117
AVR 2 programmer compatible with USBasp ISP
Programmer AVR USBasp 2 is fully compatible with the USBasp programmer. It can be used to program microcontrollers from the AVR family via the USB port. Version 2 has two...
Index: MOD-01317
Index: MOD-01317
ATmega328 mini module - microBOARD-M328
Module microBOARD-M328 is a mini development set with microcontroller ATmega328P used in popular Arduino Uno modules.
Index: MOD-02029
Index: MOD-02029
Converter RS232 - UART with connector DB9 - MAX3232 3,3V/5V
RS232 to UART serial interface converter with 9-pin D-SUB connector . The implementing circuit is the popular MAX3232.
Index: MOD-02030
Index: MOD-02030
Power module for micro ProtoPower breadboard - 3.3V 5V
Power module for a breadboard. It is supplied with a power supply or a phone charger via microUSB socket . It has a built-in stabilizer 3.3 Volts, and a switch that allows you...
Index: MSX-04554
Index: MSX-04554
DIY digital amplifier kit by Noise Reducer . The amplifier is based on Tripath TA2022 chip, the power of the amplifier is about 2 x 100 W on 4 ohm impedance. The kit...
Index: MSX-19317
Index: MSX-19317
Proto Board for Raspberry Pi Zero
Board allows independent creation of electronic circuits. Connected directly to the GPIO pins of the Raspberry Pi minicomputer in a version Zero.
Index: MSX-05794
Index: MSX-05794
DAC to build RS-AMP amplifier - SMD board + THT kit - Noise Reducer
The DAC converter is a complementary component to the digital amplifier kit by Noise Reducer. The DAC kit includes a board with SMD components mounted and two additional THT...
Index: MSX-20857
Index: MSX-20857