List of products by brand Waveshare - Strona 23
- EOL
- EOL
LCD capacitive touch screen TFT 7 '' 800x480px HDMI + USB for Raspberry Pi
Waveshare touch screen, 7" capacity for Raspberry Pi with 800 x 480 px resolution. Works with Raspberry Pi in 3B, 2B and B+ versions via HDMI and USB cable.- EOL
Waveshare GSM/GPRS/GPS SIM908 Shield - overlay on Arduino
Overlay for Arduino with SIM908 chip, which allows you to send text messages, create GSM network connections, transfer GPRS data and read GPS position. It communicates through...- EOL
WiFi EMW3162 Cortex M3 module with PCB antenna
WiFi module with 32-bit STM32F205RG Cortex M3 microcontroller (120 MHz, 1 MB Flash, 128 kB SRAM). It operates in 802.11 b/g/n standard on 2.4 GHz. It is equipped with 45...- EOL
Programmer M64 + ADP - for Atmel AVR TQFP64 ATmega128 microcontroller - Waveshare 3762
M64+ADP programmer produced by Waveshare company, which allows programming and working with Atmel ATmega64, ATmega169 microcontrollers , and also with other...- EOL
- EOL
Relay module - 3-channel - with optocoupler isolation - for Nvidia Jetson Nano - Waveshare 19075
Module for Nvidia Jetson Nano equipped with 3 optocoupler isolated relays . It has a connector made in 40-pin GPIO standard, which can be connected directly to Jetson...- EOL
E-housing for Jetson Nano - with camera holders and buttons - Waveshare 18761
Made of durable black aluminum , this case was created by Waveshare for the Nvidia Jetson Nano platform. The kit includes two utility buttons , allowing you to conveniently...- EOL
4.01inch ACeP 7-Color E-Paper E-Ink Display HAT for Raspberry Pi, 640×400 Pixels
E-paper display with 4.01'' screen diagonal and 640×400 px resolution in form of Raspberry overlay. The overlay operates at 3.3V and 5V , communicates over SPI interface....- EOL
ESP32 One - Mini development board with WiFi and Bluetooth - Waveshare 19188
ESP32 One development board powered by ESP32-D0WDQ6-V3 . It supports WiFi 802.11 b/g/n and Bluetooth BLE4.2 wireless communications and can be powered by USB or 4.2 V...- EOL
Pippy - bionic robot dog - Raspberry Pi compatible - Waveshare 19525
Bionic robot from Waveshare in the form of a dog - Pippy. It is equipped with a number of sensors that allow it to perform actions such as monitoring the environment,...- EOL
- EOL
LCD touch screen eesistive TFT 3,5 - Waveshare 13506
Waveshare touch screen, 3.5" resistance for Arduino with 480 x 320 px resolution. There is also a microSD card slot on the board. It works with Arduino and Nucleo via SPI...- EOL
Raspberry Pi 400 GPIO adapter - 2x 40-pin - Waveshare 20219
This module allows you to angle the GPIOs of your Raspberry Pi 400 minicomputer for easy access. By default on the Raspberry Pi 400 access to the GPIOs is difficult due to...- EOL
- EOL
- EOL
RTC WatchDog HAT - overlay with RTC High Precision module - for Raspberry Pi - Waveshare 20374
RTC WatchDog HAT overlay equipped with DS3231 chip - high precision real time clock . Compatible with Raspberry Pi series and Jetson Nano module. It has built-in MAX705...- EOL
- EOL
UPS Module with Li-Pol battery for Raspberry Pi Pico - Waveshare 20121
An overlay designed for Raspberry Pi Pico, acts as an uninterruptible power supply (UPS) in case of a sudden power failure. The module also allows you to monitor the battery...- EOL
- EOL
- EOL
- EOL
CAN Bus Module for Raspberry Pi Pico - UART to CAN conversion - Waveshare 20240
Long range CAN Bus communication module for Raspberry Pi Pico. The board is based on E810-TTL-CAN01 chip which provides conversion of UART serial signal to CAN. It supports...- EOL