- EOL
|
Attention! The sale of the product has been completed. Check otherdevices in this category. |
Description
WiFi module with 32-bit microcontroller STM32F205RG clocked at 120 MHz. It is equipped with 128 kB SRAM and 1 MB flash memory. Works in WiFI 802.11 b/g/n standard on 2.4 GHz. It has 45 outputs, 32 of which 32 are GPIO (30 of which have been connected to 2 mm raster connectors), the module has built-in LEDs and a PCB antenna, operates with a voltage of 3.3V. The board measures 39 x 24 mm.
The module is sold with EMW3162. In our offer there is also available EMW3162 WiFiShieldcover plate.
Specification .
- Power supply voltage: 3,3 V
- Microcontroller: STM32F205RG
- Clock: 120 MHz
- RAM: 128 kB SRAM
- Flash memory: 1 MB
- EasyLink technology support
- Power consumption:
- Standby mode: approx. 7 mA
- During transmission: Average 24 mA
- Standard: IEEE 802.11 b/g/n
- Affection: -96 dBm
- Encryption algorithms: WEP, WPA / WPA2 PSK / Enterprise
- Built-in serial transmission software
- Two LEDs
- Interfaces:
- 32 GPIO pins
- 2 x UART with hardware flow control
- 1 x SPI / I2S
- 8 x input A/c
- 2 x D/A output
- 1 x USB OTG
- 2 x CAN
- 1 x I2C
- For every GPIO available PWM
- SWD debugging interface
| Before connecting the module, read theuser guideavailable on the manufacturer's website and thetechnical documentation ofthe module. |
Useful links |
