Product description: Interstate 75 W with Raspberry Pi Pico W - RGB LED matrix driver - PiMoroni PIM662*
Universal driver based on Raspberry Pi Pico W module compatible with LED matrices with hub75 interface. Interstate 75 W is used in the implementation of projects where the visual effect plays the main role. The controller gives you practically an infinite number of possibilities , you can create, for example, a moving sign or a display for various types of sensors. The module is powered by Pico W, has two programmable buttons, RESET and a built-in RGB LED. Besides, there is also a STEMMA QT / Qwiic connector on it.
Interstate 75 W with Raspberry Pi Pico W - RGB LED matrix driver - PiMoroni PIM662.
You can use the Interstate 75W for a variety of projects.
Interstate 75W Programming
The driver is based on the Raspberry Pi Pico W module, which uses the RP2040 microcontroller. It is programmed in C/C++ and MicroPython. The manufacturer has prepared guides for these languages along with sample program codes:
Interstate 75W Technical Specification
- Raspberry Pi Pico W
- Dual Arm Cortex M0+ running at up to 133MHz with 264KB SRAM
- 2 MB QSPI flash supporting XiP
- Powered and programmable via microUSB type B
- 2.4 GHz WiFi wireless communication
- Compatibility: LED matrices with hub75 interface
- Mounting: on the back of the matrix
- Power supply: microUSB port on Raspberry Pi Pico W
- Two programmable buttons
- RESET button
- RGB LED
- STEMMA QT/Qwiic connector
- Dimensions: 64.3 x 40 x 18mm
The driver is compatible with LED matrices with hub75 interface.
