Product Description: NFC Development Kit - STM32 ST25R3911B - Waveshare 17623
NFC development kit based on STM32 ST25R3911B microcontroller with AT32F413RCT7 driver and OLED display , programmable buttons and popular interfaces . Perfect for learning about NFC communication and creating projects based on this method of communication. It supports multiple NFC protocols with a maximum output power of up to 1.4W and a low current capacitive wake function. It will work in applications requiring high RF performance and low power consumption, such as access control, ticketing, industry, medical industry, etc.
Main features of the NFC development kit
- Multiple protocol support: ISO18092, ISO14443A, ISO14443B, ISO15693, FeliCa.
- Differential antenna design, output power up to 1.4W, longer sensing distance.
- The built-in low-power capacitive sensor allows capacitive wake-up, detects nearby cards without activating the reader's magnetic field.
- AT32F413RCT7 controller, easy to learn and expand, no external controller required.
- 1.3" OLED display.
- Built-in SRAM, extra space for internal RAM.
- microSD card slot for storing data sent via NFC.
- 4x button, 2x user status LED, convenient for debugging.
- UART debugging interface, IO pins for connecting other user peripherals.
- Dustproof acrylic case.
NFC development kit from Waveshare.
Layout of elements on the board.
Layout of elements on the board
- AT32F413RCT7
- ST25R3911B: NFC chip
- 23LC1024: SRAM, 1Mb
- CP2102: USB - UART converter, for debugging
- SPX3819: 3.3V voltage regulator
- 1.3" OLED display: white text, 128x64px, SH1106 driver
- 4x user buttons
- 2x LEDs
- Unused MCU pins
- USB port - UART
- microSD card slot
- SWD programming interface
- NFC induction coil
- UART configuration jumpers:
RXD: connected to RXD2 by default, switched to RXD1 via 0Ω resistor
TXD: connected to TXD2 by default, switched to TXD1 via 0Ω resistor
NFC development kit specification
- NFC chip: ST25R3911B
- Microcontroller: AT32F413RCT7
- Core: ARM Cortex M4F 32-bit
- Operating frequency: 200MHz
- Operating voltage: from 2 V to 3.6 V
- Housing: LQFP64
- Memory: 256 kB flash, 160 kB SRAM
- Interfaces: 2x SPI, 5x USART, 2x I2C, 2x CAN, 1x USB, 1x SDIO
- AD/DA Converters: 2x AD (12-bit, 16-channel)
- Supply voltage: 5V
- Operating voltage: 3.3V
- Operating Frequency: 1.4W
- Communication interface: SPI
- Supported protocols:
- ISO18092 (NFCIP-1) P2P enabled
- ISO14443A, ISO14443B and FeliCa
- ISO15693
- Other custom protocols (such as MIFARE Classic)
- Dimensions: 105.5 x 66 x 17.6mm
NFC development kit ST25R3911 in an acrylic case. 
