Description
The module is based on the SN65HVD230 system that allows you to connect the microcontroller to the CAN bus. Communication is via the serial interface - RX, TX. It works with a voltage of 3.3 V.
The system hasscrew connectors and goldpin connectors, pitch of 2.54 mm.
Connection
The table describes the pins of the module.
| Pin | Description |
|---|---|
| 3.3 V | Power supply of 3.3 V. |
| GND | The ground of the system. |
| CAN RX | Communication line of the receiver of the serial interface. |
| CAN TX | Communication line of the receiver of the serial interface. |
| CANL |
The transmission line of the CAN bus. |
| CANH | The transmissionline of the CAN bus. |
Useful links |
