Product description: OLED monochrome graphic display 1,12'' 128x128px - STEMMA QT / Qwiic - Adafruit 5297
OLED graphic monochrome display created by Adafruit. The screen has a diagonal of 1,12" and a resolution of 128 x 128 px. It is based on SSD1107 driver chip, which communicates via I2C or SPI. The screen displays only an image, does not have a backlight, so it consumes very little power and has a very high contrast. The display itself is powered by 3.3 V or 12 V, but the logic voltage is 3.3 V or 5 V, thanks to a built-in converter. Easy connection is enabled by STEMMA QT / Qwiic connectors.
Product compatible with Arduino and Raspberry Pi
The manufacturer has prepared a user manual and a library for Arduino. In Adafruit system you can also find an example of connection with Raspberry Pi.
Leads of OLED display module.Leads of the OLED display module
The module is equipped with STEMMA QT / QWIIC connectors and holes for soldering standard goldpin pins with 2,54 mm pitch. It uses I2C or SPI interface for communication.
- GND - ground of the chip
- VIN - supply voltage from 3 V to 5 V
- 3Vo - voltage regulator output 3.3 V
- CS - SPI bus Chip Select device selection
- RST - reset of the module
- A0/DC - I2C bus address change / SPI bus data line
- CLK - I2C bus clock line / SPI bus clock line
- Data - SDA I2C bus data line / SPI bus data line
OLED display specification
- Supply voltage: 3.3 V to 5 V
- Diagonal: 1.12"
- Resolution: 128 x 128 px
- Color depth: monochrome (white)
- Module design: COG
- Active display area: 20 x 20 mm
- Pixel size: 0.15 x 0.15 mm
- Brightness (cd/m2): 100 (typical) at 12 V
- Communication: I2C / SPI
- Connectors: STEMMA QT / Qwiic
- Dimensions: 40.5 x 30.5 x 6 mm
- Weight: 6.4 g
- Included: goldpin strip
Kit contents.
