- Reduced price
- Sale
- Reduced price
- Sale
SENSORS - Strona 6
Loading...
Encoder 24 impulse 20mm - EC16 vertical - 5pcs.
Knob in the form of an encoder that allows you to create a simple user interface. The module sends the digital signal to one of the two pins, depending on the direction of...
Index: MOD-06908
Index: MOD-06908
BNO085 9-DOF IMU Fusion Breakout - 3-axis accelerometer, magnetometer and gyroscope - Adafruit 4754
Sensor based on the BNO085 system equipped with an accelerometer, magnetometer and gyroscope. Allows you to measure acceleration, spatial orientation, and where the strongest...
Index: ADA-22113
Index: ADA-22113
IDC adapter 10pin 1.27mm - Molex PicoBlade 1.25mm + v2 connectors for PMS7003 sensor
The adapter allows for signal transmission from the connector IDC 10 pin on Molex PicoBlade connector with a pitch of 1.25 mm and has four soldered goldpin pins of 2.54 mm....
Index: DNG-13746
Index: DNG-13746
Sensor / probe to measure soil moisture - analog - Waveshare 9527
The sensor to determine the moisture level of the soil. It is powered with the voltage from 3.1 V to 5 V. The output is the analog voltage which increases its value along with...
Index: WSR-04504
Index: WSR-04504
DFRobot Gravity: Non-contact Liquid Level Sensor
The sensor determines the liquid level without dipping into the liquid. Due to the lack of contact with the liquid, the module is suitable for level measurement of hazardous...
Index: DFR-06931
Index: DFR-06931
Rotation sensor, pulse generator, optical encoder - DFRobot 400P / R
The encoder generates a two-phase AB rectangular pulse signal by rotating a dial with an optocoupler. The resolution is 400 pulses per revolution for each phase,...
Index: DFR-09381
Index: DFR-09381
Inductive proximity sensor LJ30A3-15-Z / BY 15mm 6-36V
Inductive, digital proximity sensor with a cable with the length of 100 cm and nuts to facilitate mounting. It detects metal at a distance of 15 mm. The object detection is...
Index: DNG-11874
Index: DNG-11874
BME280 - humidity, temperature and pressure sensor 110 kPa I2C / SPI - 3.3V - soldered connectors
Very easy to use temperature, humidity and pressure sensor. The module is powered by 3.3 V and can also communicate via I2C or SPI interface . Sensors of this type are...
Index: ZES-16534
Index: ZES-16534
Gravity - microwave sensor for motion detection V2.0 - DFRobot SEN0192
The sensor uses the Doppler effect to detect the movement of objects. By using microwaves instead of infrared, it is possible to detect objects reflecting waves in the...
Index: DFR-05497
Index: DFR-05497
Magnetic Field Hall sensor - Iduino SE054
Module with Hall sensor, digital magnetic switch. Enables detection of a magnetic field. Operates with a voltage of 5 V.
Index: OST-14326
Index: OST-14326
Rotation sensor, encoder 20 pulses Okystar KY-040
The KY-040 rotation sensor is an incremental encoder. The encoder's task is to generate pulses corresponding to the rotational movement. The sensor detects clockwise and...
Index: OKY-16558
Index: OKY-16558
Gravity: Analog Liquid Level Sensor (FS-IR02)
Photoelectric liquid's level sensor. It has high sensitivity without the need to use the mechanical parts. The probe withstands high temperature and high pressure.
Index: DFR-06612
Index: DFR-06612
PAM8403 5V 3W stereo audio amplifier - two-channel - red
A module with a versatile two channel amplifier, it is powered with a voltage of 5 V. It allows you to connect the speakers of from 4 Ω to 8 Ω and with 3 W of power, each.
Index: GRL-12806
Index: GRL-12806
Grove - set of 5 female-female 4-pin - 2mm/50cm with latch
A set of five 4-pin Grove wires. They are used to connect sensors with Grove Base Shield v2. The length of the cable is 50 cm. Version with a latch.
Index: SEE-04399
Index: SEE-04399
Set of sensors and modules + box - 65 elements
A 65-piece sensor kit for Arduino and Raspberry Pi. The kit includes a temperature and humidity sensor, a soil moisture sensor, a smoke detector, a display, a relay, and...
Index: GRL-12795
Index: GRL-12795
IR beam interruption sensor - LED 5mm - 0-100cm
The motion sensor reacts to the interruption of infrared light beam transmitted between the transmitter and the receiver . It has a detection range from 0 cm to 100 cm ....
Index: DNG-18691
Index: DNG-18691
Limit switch without lever - WK807 - 5pcs.
Limit switch without lever. Maximum operating parameters: a voltage AC 250 V and a current of 16 A.
Index: PAS-00925
Index: PAS-00925
- Sale
Waterproof probe with temperature sensor DS18B20 - 10m
Waterproof probe is equipped with a digital thermometer DS18B20 with a cable with the length of 10 meters.
Index: SES-04591
Index: SES-04591
DFRobot - 12V Solenoid Valve 1/2"
The enables the control of the liquid flow using a computer or microcontroller. The valve is supplied with the voltage of 12 V. It is closed to connect the power supply of 12...
Index: DFR-07423
Index: DFR-07423
DFRobot Gravity - analog sensor of TDS, purity of water for Arduino
Analog TDS sensor compatible with Arduino, it is used for measuring the hardness and the purity of water. It can be used to test the quality of water in households, hydroponic...
Index: DFR-10830
Index: DFR-10830
ACS712 current sensor module. It allows you to measure current from 0 A to 20 A both AC and DC, based on the Hall effect. The sensitivity of the system is 100 mV/A. Powered by...
Index: OST-14275
Index: OST-14275
Reed switch normally - plastic 14mm - 5pcs.
Reed contact in the plastic straight case with the length of 14 mm. The set contains 5 reed contacts.
Index: MOD-09466
Index: MOD-09466
- Sale
- SPECIAL OFFERS
Biomedical electrodes - 10pcs - SparkFun SEN-12969
10 pieces of biomedical sensors that can be used during EEG, ECG and EMG examination. The device are of single use, they have a layer of a latex gel.
Index: SPF-02604
Index: SPF-02604
Grove - LM358 Ambient Light Sensor v1.2
Module from the Grove series is equipped with a sensor LM358. The sensor allows to determine the intensity of the light and reflects the analog voltage signal back to Arduino....
Index: SEE-11330
Index: SEE-11330