- Reduced price
- Sale
- Reduced price
- Sale
- Sale
- Sale
- Reduced price
- Sale
SENSORS - Strona 7
Loading...
Set of sensors and modules + box - 65 elements
A 65-piece sensor kit for Arduino and Raspberry Pi. The kit includes a temperature and humidity sensor, a soil moisture sensor, a smoke detector, a display, a relay, and...
Index: GRL-12795
Index: GRL-12795
IR beam interruption sensor - LED 5mm - 0-100cm
The motion sensor reacts to the interruption of infrared light beam transmitted between the transmitter and the receiver . It has a detection range from 0 cm to 100 cm ....
Index: DNG-18691
Index: DNG-18691
Limit switch without lever - WK807 - 5pcs.
Limit switch without lever. Maximum operating parameters: a voltage AC 250 V and a current of 16 A.
Index: PAS-00925
Index: PAS-00925
Waterproof probe with temperature sensor DS18B20 - 10m
Waterproof probe is equipped with a digital thermometer DS18B20 with a cable with the length of 10 meters.
Index: SES-04591
Index: SES-04591
DFRobot - 12V Solenoid Valve 1/2"
The enables the control of the liquid flow using a computer or microcontroller. The valve is supplied with the voltage of 12 V. It is closed to connect the power supply of 12...
Index: DFR-07423
Index: DFR-07423
DFRobot Gravity - analog sensor of TDS, purity of water for Arduino
Analog TDS sensor compatible with Arduino, it is used for measuring the hardness and the purity of water. It can be used to test the quality of water in households, hydroponic...
Index: DFR-10830
Index: DFR-10830
ACS712 current sensor module. It allows you to measure current from 0 A to 20 A both AC and DC, based on the Hall effect. The sensitivity of the system is 100 mV/A. Powered by...
Index: OST-14275
Index: OST-14275
Reed switch normally - plastic 14mm - 5pcs.
Reed contact in the plastic straight case with the length of 14 mm. The set contains 5 reed contacts.
Index: MOD-09466
Index: MOD-09466
Grove - LM358 Ambient Light Sensor v1.2
Module from the Grove series is equipped with a sensor LM358. The sensor allows to determine the intensity of the light and reflects the analog voltage signal back to Arduino....
Index: SEE-11330
Index: SEE-11330
A pair of magnetic quadrature sensors, designed for installation in micro motors from Pololu. It consists of a board with the Hall sensor and the plastic impeller with magnets,...
Index: PLL-04884
Index: PLL-04884
Magnetic sensor to open door / window - reed contact CMD932
Wired proximity sensor activated magnetically. The device is used to determine the position of doors and windows. Case dimensions - 9.0 x 32 mm.
Index: SES-03128
Index: SES-03128
ACS711EX current sensor -31A do +31A - Pololu 2453
Current sensor working in the range of +/- 31 A, based on the Hall effect. The output is an analog voltage. Supply voltage is from 3 V to 5.5 V.
Index: PLL-01689
Index: PLL-01689
Phototransistor SFH-313FA 5mm 870nm - 5 pcs
Phototransistor in the case of 5 mm. Maximum sensitivity for the wave with the length of 870 nm. Darkened lens. 5 pcs.
Index: UCC-04245
Index: UCC-04245
Magnetometer GY-271 3-axis digital I2C 3,3V / 5V - QMC5883L
Sensor to measure the magnetic field in three axes in the range of ±8 gauss with a resolution of 5 miles gaus. It works with the voltage from 3.3 V to 5.0 V. It is...
Index: MOD-02722
Index: MOD-02722
Grove - 125kHz RFID reader with antenna - Seeedstudio 113020002
Easy to use module of RFID reader with UART and Wiegand interface. Works with UEM4100 RFID modules. The kit includes antenna which allows you to communicate in a range up to 7...
Index: SEE-04417
Index: SEE-04417
Grove - ultrasonic distance sensor 3-350cm
Ultrasonic sensor operating in the range from 3 cm to 350 cm. It is powered with voltage of 5 V. The output is a signal, duration of which is proportional to the measured...
Index: SEE-11360
Index: SEE-11360
Cable for analog distance sensors Sharp - men's tip - Pololu 1799
Cable with plug for analog distance Sharp sensors with a male end. Length: 30cm.
Index: PLL-00527
Index: PLL-00527
BME - humidity, temperature and pressure sensor I2C/SPI - 3,3V/5V - Waveshare 15231
Humidity, temperature and pressure sensor powered with the voltage of 3.3 V or 5 V with I2C and SPI interface. Measuring range: temperature: -40 °C to 85 °C, humidity: 0 %RH...
Index: WSR-13463
Index: WSR-13463
Microphone 50-56dB 9/4,5mm - SMD
Height h: 4.5 mm. Diameter Ø: 9 mm. Sensitivity: 50 - 56 dB. Items are sold in sets of 5 pieces.
Index: EAK-00739
Index: EAK-00739
OdSeven Camera HD IR-CUT OV5647 5Mpx - day/night IR for Raspberry Pi + IR modules
Module with the camera, connected to a dedicated connector of minicomputer Raspberry Pi, version 4, 3, 2, B+, A+. It has a matrix CCD 1/4" with the resolution of 5 Mpx,...
Index: ODS-07599
Index: ODS-07599
Distance sensor carrier with voltage regulator VL53L1X - 400cm - Pololu 3415
Digital sensor, connecting the proximity measurement via method of time-of-flight, and the ability to measure the intensity of ambient light. Working range is up to 400 cm...
Index: PLL-11842
Index: PLL-11842
ALS-PT19 - analog ambient light sensor - Adafruit 2748
The module is equipped with analog light sensor, powered with a voltage in the range from 2.5 V to 5.5 V. The greater the light intensity, the higher the value of the voltage...
Index: ADA-05298
Index: ADA-05298
Liquid level sensor - analog + wires - Waveshare 9525
The sensor is used for determining the liquid's level in the vessel. It is powered with the voltage from 2.0 V to 5.0 V. The output is an analog voltage which increases its...
Index: WSR-04503
Index: WSR-04503
NTC 110 10kΩ thermistor with M6 screw connection
Thermistor of NTC type with a resistance of 10 kΩ with connector for M6 screw. The connecting cable has a length of 160 mm.
Index: SES-03878
Index: SES-03878