List of products by brand SparkFun - Strona 35
Qwiic female flexible cable with 4-pin connector 16.5cm - SparkFun CAB-22726
Qwiic flexible cable from SparkFun. Terminated with four female plugs with a 2.54 mm pitch, which can be easily connected to the pins. The other end of the cable is terminated...- EOL
- EOL
Case Raspberry Pi Model B Pi Tin - black
Black enclosure for the miniature Raspberry Pi computer with external dimensions 95 x 62 x 27 mm. Provides access to USB, Ethernet, SD, HDMI, audio, video, and GPIO outputs.- EOL
Module with a microphone MEMS INMP401 (ADMP401) - SparkFun BOB-09868
A small module with a MEMS microphone ADMP401. Characterized by 67 times gain, works with a voltage from 1.5 V to 3.3 V. The output is an analog signal.- EOL
Potencjometr dotykowy - SparkFun
Digital capacitive sensor with analog output or PWM controlled via built-in PIC16F1829 microcontroller that enables the read of 256 positions. The system communicates via the...- EOL
LSM303C - 3-axis accelerometer and magnetometer IMU 6DoF I2C/SPI module - SparkFun BOB-13303
The sensor is a combination of a 3-axis digital accelerometer and a compass. It allows to measure acceleration and magnetic field in configurable ranges. It communicates via...- EOL
LSM6DS3 3-axis accelerometer and gyroscope I2C/SPI module - SparkFun SEN-13339
Sensor for measuring acceleration and angular velocity in three axes. It is a combination of 3-axis accelerometer and gyroscope. It communicates via the I2C or SPI bus, it...- EOL
LSM9DS1 9DoF IMU - 3-axis accelerometer, gyroscope and magnetometer I2C/SPI - SparkFun SEN-13284
The sensor is a combination of 3-axis digital gyroscope, accelerometer and compass. It allows you to measure acceleration, magnetic field and angular velocity in the...- EOL
SparkFun MicroView Bootloading Kit
Kit for direct programming of the ATmega328P microcontroller built-in MicroView module. The system allows, i.a. for change, or deleting an installed Arduino bootloader.- EOL
SparkFun IMU Shield for Photon
Extension for a Photon sensor IMU 9DoF LSM9DS1 , which is a combination 3-axis digital gyroscope, accelerometer and compass.- EOL
SparkFun LilyPad Arduino USB ATmega32U4 microcontroller
Miniature module with AVR Atmega32U4 microcontroller with 32 KB Flash memory, 9 digital pins, 4 of which can be used as analog inputs and PWM outputs. Uploaded bootloader...- EOL
SparkFun Inventor's Kit - v3.2 + Arduino Uno (original)
A set of electronic components that make it easy to start working with Arduino series modules. The set includes among others: LEDs, resistors, buttons, sensors and LCD display...- EOL
MAG3110 3-axis digital magnetometer I2C - SparkFun module
Sensor to measure magnetic field in three axes in the range of ±10 gaus with a resolution of 1 mile gaus. he supply voltage is from 1.95 V to 3.6 V, sensor is characterized by...- EOL
SparkFun - magnetic card reader
Reader allowing to read data from magnetic cards. Data reading is performed by dragging the card through the reader reacting to the change of a magnetic field. The reader has a...- EOL
Standard Servo Gripper - Parallel Gripper Kit A
A small bracket made of plastic with a hole adapted for the standard servos. The total length is 127 mm, width is 104,14 mm, maximum opening is 71,12 mm and the mounting hole...- EOL
- EOL
- EOL
SparkFun EasyVR Shield 3.0 voice recognition- Shield for Arduino
EasyVR Shield 3.0 is a shield of voice recognition for Arduino with a built-in module EasyVR. Shield has extra audio outputs / headphone Jack and access to pins of I / o of...- EOL
Case Raspberry Pi B and PiFace Digital module - SparkFun transparent
Transparent enclosure that houses not only the Raspberry Pi mini-computer, but also a dedicated PiFace Digital module. Lockable without additional screws.- EOL
SparkFun Realtek Amoeba RTL8195AM Board - module, wi-fi + NFC
The module is equipped with a microcontroller with 32 bit ARM Cortex M3 core enabling connection via wi-fi and NFC. The system has GPIO connectors, popular I2C, SPI, UART...- EOL