MicroView Bootloading Kit
MicroView Bootloading Kit
MicroView Bootloading Kit - zdjęcie 1
MicroView Bootloading Kit - zdjęcie 2

SparkFun MicroView Bootloading Kit

Index: SPF-03071

Kit for direct programming of the ATmega328P microcontroller built-in MicroView module. The system allows, i.a. for change, or deleting an installed Arduino bootloader.

€22.09
€17.96 tax excl.

Unavailable
Discontinued product
30-day returns
Manufacturer: SparkFun

Attention!

The product has been discontinued. Check others products in category.

Description

Set with Tiny AVR programmer for direct installation of ATmega328P microcontroller built-in MicroView module. The system allows, i.a. for changing or deleting an installed Arduino bootloader. Detailed description of connection and activation of elements, can be found in the user guide.

 

Included

  • 1 x USB Tiny AVR programmer
  • 1 x knife
  • 30 wires M/M 180 mm
  • 3 x resistor 0 Ω 1/6 W (jumper)

 

Screen - touch no

Same day shipping

Posting the payment for the order on our account on a business day up to 10 AM means sending the goods on the same day!

The time of payment depends on the ELIXIR's hours session of the sender's bank and the recipient of the transfer. It may take up to 2-4 working days.

Free delivery for orders exceeding 300 PLN!

Only for prepaid orders shipped to Poland.

Terms of delivery outside of Poland

GLS - zone 1

Austria, Belgium, Croatia, The Czech Republic, Denmark, Germany, Netherlands, Slovakia

  • Delivery time: 2-4 days
  • Delivery cost: 35 PLN
  • Insurance: 5000 PLN
GLS - zone 2

Bulgaria, Estonia, France, Hungary, Italy, Latvia, Lithuania, Luxembourg, Portugal, Romania, San Marino, Slovenia, The United Kingdom

  • Delivery time: 2-5 days
  • Delivery cost: 50 PLN
  • Insurance: 5000 PLN
Kurier GLS - zone 3

Finland, Greece, Ireland, Liechtenstein, Serbia, Spain, Switzerland, Sweden

  • Delivery time: 2-7 days
  • Delivery cost: 80 PLN
  • Insurance: 5000 PLN

Terms of delivery in Poland

Card image cap
Poczta Polska
  • Delivery time: 1-3 days
  • Payment in advance: od 9,90 PLN
  • Cash on delivery: 17,90 PLN
  • Insurance: 1000 PLN
Card image cap
Kurier GLS
  • Delivery time: 1-2 days
  • Payment in advance: od 14,90 PLN
  • Cash on delivery: 22,90 PLN
  • Insurance: 6000 PLN
Card image cap
Paczkomaty 24/7
  • Delivery time: 1-3 days
  • Payment in advance: od 12,90 PLN
  • Over 8000 parcel lockers
  • Insurance: 200 PLN
  • Free delivery of orders over 300 PLN does not apply to parcels addressed outside of Poland.
  • The delivery period is counted in working days from the date of dispatch of the order.

Be the first to ask a question about this product!

No customer reviews for the moment.

You might also like

MicroView OLED display - compatible with Arduino - SparkFun DEV-12923

MicroView is the OLED display of 64 x 48 px with an integrated Atmega328P microcontroller and uploaded bootloader Arduino Uno. The module can display messages, data from...
Index: SPF-03069
Index: SPF-03069
In stock, shipping 24 hours!
(Check quantity)
Regular price €48.60 Price €48.60

MicroView - USB programmer - SparkFun DEV-12924

USB programmer for the module of MicroView OLED display. The device is equipped with male and female connectors, thanks to this, board can be attached directly or connect using...
Index: SPF-03070
Index: SPF-03070
Waiting time: approx. 10-30 days
Regular price €18.37 Price €18.37

Customers who bought this product also bought:

Arduino for advanced - Rick Anderson, Dan Cervo

Publisher: Helion. The book is designed for people who want to use Arduino for other, more advanced solutions than those available online.
Index: KSZ-02184
Index: KSZ-02184
Unavailable
Regular price €11.60 Price €11.60

Arduino in action - Martin Evans, Joshua Noble, Jordan Hochenbaum

Translation: Jacek Janczyk. Publisher: Helion. The book contains a detailed description of Arduino's possibilities together with numerous examples.
Index: KSZ-02307
Index: KSZ-02307
Unavailable
Regular price €14.63 Price €14.63

LED RGB 5mm WS2811 addressable - 10pcs

The 5 mm RGB WS2811 RGB LED with a built-in driver allows the device to be operated via a 1-wire bus.
Index: UCC-02438
Index: UCC-02438
Unavailable
Regular price €5.79 Price €5.79

ADS1015 - ADC 12-bit 4-channel I2C converter - Adafruit 1083

Module with analog-to-digital converter with 12-bit accuracy. Operates at speed up to 3300 samples per second. Has the ability to change the amplification up to 16 x. It is...
Index: ADA-02618
Index: ADA-02618
In stock, shipping 24 hours!
(Check quantity)
Regular price €11.40 Price €11.40

Trinket - Attiny85 Mini Microcontroller - 3,3V - Adafruit 1500

Miniature module with an AVR Attiny85 microcontroller and is equipped with 8 KB of Flash memory, 5 digital pins, analog input and 2 PWM channels. On board is miniUSB connector,...
Index: ADA-02625
Index: ADA-02625
In stock, shipping 24 hours!
(Check quantity)
Regular price €8.81 Price €8.81

Trinket - Mini Microcontroller module - 5V - Adafruit 1501

Miniature module with an AVR Attiny85 microcontroller and is equipped with 8 KB of Flash memory, 5 digital pins, analog input and 2 PWM channels. On board is microUSB...
Index: ADA-02626
Index: ADA-02626
In stock, shipping 24 hours!
(Check quantity)
Regular price €8.35 Price €8.35

NeoPixel Stick - LED RGB 8 x WS2812 5050 - Adafruit 1426

The panel consists of 8 individually addressed RGB LEDs WS2812 5050 with integrated control unit. The module has one microcontroller output. The length of the panel is 51 mm
Index: ADA-02902
Index: ADA-02902
In stock, shipping 24 hours!
(Check quantity)
Regular price €7.88 Price €7.88

MicroView OLED display - compatible with Arduino - SparkFun DEV-12923

MicroView is the OLED display of 64 x 48 px with an integrated Atmega328P microcontroller and uploaded bootloader Arduino Uno. The module can display messages, data from...
Index: SPF-03069
Index: SPF-03069
In stock, shipping 24 hours!
(Check quantity)
Regular price €48.60 Price €48.60

MicroView - USB programmer - SparkFun DEV-12924

USB programmer for the module of MicroView OLED display. The device is equipped with male and female connectors, thanks to this, board can be attached directly or connect using...
Index: SPF-03070
Index: SPF-03070
Waiting time: approx. 10-30 days
Regular price €18.37 Price €18.37

Soldering tin in tube 16g / 1.00mm

Tin in a tube with a diameter of 1.00 mm and a weight of 16 grams.
Index: NSZ-00309
Index: NSZ-00309
In stock, shipping 24 hours!
(Check quantity)
Regular price €0.84 Price €0.84

Antimagnetic tweezer curved Vetus ESD 15 - 116mm

Stainless steel antimagnetic tweezers. Symbol: HRC40 Vetus ESD15. Length: 116 mm.
Index: NSZ-00847
Index: NSZ-00847
Waiting time: about 10-30 days
Regular price €1.40 Price €1.40

Soldering station ZD99 - 48W

Tip-based soldering station with soldering iron. It has the ability to adjust the temperature in the range from 150 °C to 450 °C. The total power is 48 watts.
Index: LUT-00998
Index: LUT-00998
In stock, shipping 24 hours!
(Check quantity)
Regular price €15.56 Price €15.56

RandomCategoryProducts

DC Motor - Tamiya 980112M Mabuchi FA-130

Small metal motor reaching 12,300 rpm with a supply voltage of 3 V.
Index: PLL-00138
Index: PLL-00138
Unavailable
Regular price €1.98 Price €1.98

Micro-Match connector - 10 pin socket

Micro-Match connector for 10-pin printing.
Index: UCC-00283
Index: UCC-00283
Unavailable
Regular price €0.21 Price €0.21

Micro-Match connector for 10-pin tape

Micro-Match connector on 10-vein tape with a pitch of 1.27 mm.
Index: UCC-00285
Index: UCC-00285
Unavailable
Regular price €0.91 Price €0.91

Pololu LPY550AL 2-axis XZ gyroscope

A sensor for measuring angular speed in two axes: XZ. It has a choice of measuring range: to ±500 °/sec, ±2000 °/sec. It has an integrated voltage regulator and analogue...
Index: PLL-00493
Index: PLL-00493
Unavailable
Regular price €15.12 Price €15.12

3-axis magnetometer, digital MAG3110

3-axis magnetometer in a small case DFN. Measuring range: ±1000 uT. Sensitivity at 0.1 uT. The communication interface is I2C bus.
Index: SES-00964
Index: SES-00964
Unavailable
Regular price €1.86 Price €1.86

HiTechnic color sensor - for Lego Mindstorms EV3 and NXT

The sensor together with the sensor and the intensity is vision Lego NXT robot. The sensor is able to distinguish between all colors including the colors of the blocks.
Index: ROB-00982
Index: ROB-00982
Unavailable
Regular price €55.58 Price €55.58

Servomechanism - Lego Mindstorms NXT

The servo can serve as the actuator of the robot. The device allows precise movement accurate to 1 degree.
Index: ROB-00986
Index: ROB-00986
Unavailable
Regular price €32.33 Price €32.33

USB Bluetooth adapter - Lego Mindstorms NXT

Adapter USB-Bluetooth allows the wireless exchange of data between computers, PC or Mac and the NXT device.
Index: ROB-00987
Index: ROB-00987
Unavailable
Regular price €39.30 Price €39.30

Gift voucher - PLN 50

Gift certificate worth PLN 50.
Index: BON-01044
Index: BON-01044
Unavailable
Regular price €11.63 Price €11.63

Gift Card - 300zł

Gift certificate worth PLN 300.
Index: BON-01045
Index: BON-01045
Unavailable
Regular price €69.77 Price €69.77

Receiver module GPS-FGPMMOPA6H GPS

Receiver module based on MT3339 chip in the surface soldered case - SMD. It has a built-in antenna and the possibility to connect the external version.
Index: UCC-01233
Index: UCC-01233
Unavailable
Regular price €23.23 Price €23.23

Bluetooth antenna ANT9520-245

Internal Bluetooth antenna, ZigBee, WLAN in SMD housing. Works on the frequency: 2.45 GHz in 200 MHz, 1.5 dBi band. Dimensions of the housing are 9.5 x 2.0 x 1.0 mm .
Index: SES-01263
Index: SES-01263
Unavailable
Regular price €0.58 Price €0.58