- New
Camera ZeroCam OV5647 5MPx - fisheye 170 deg - for Raspberry Pi Zero
Index: ODS-12756
- Reduced price
- Sale
- New
- Reduced price
- Sale
List of products by brand DFRobot - Strona 9
Loading...
DC Motor with Gear 6V 300RPM + encoder
Motor with 20:1 gearing , 300 rpm , 3.6 kg*cm (0.35 Nm) torque. DC current is 2.7 A. The device has a quadrature encoder with a resolution of 11 pulses per revolution (after...
Index: DFR-09527
Index: DFR-09527
DC Motor with Gear 6V 210RPM + encoder
Motor with 34:1 gearing , 210 rpm, 10.0 kg*cm (0.9 Nm) torque. DC current is 3.2 A. The device has a quadrature encoder with a resolution of 11 pulses per revolution (after...
Index: DFR-09531
Index: DFR-09531
Water generator with 5.0 volt output at 4/min flow rate. Threads are 1/2," works with pressures up to 1.0 MPa. The maximum output current is 150 mA. Battery not included.
Index: DFR-09537
Index: DFR-09537
DFRobot Gravity - TEMT6000 analog light sensor
Analog ambient light sensor TEMT6000, compatible with Arduino. The sensor allows to determine the light density and reflects the analog voltage signal back to Arduino. The...
Index: DFR-11253
Index: DFR-11253
DFRobot Gravity v2.0 - relay 1 channel - 277VAC / 16A contacts - 5V coil
Module with relay that allow for the control of the actuators through the ports of the microcontroller. The kit includes a cable adapted to DFRobot IO Expansion Shield.
Index: DFR-11262
Index: DFR-11262
DFRobot Gravity - IR receiver 38kHz
The IR receiver from the Gravity series, operating at a frequency of 38 kHz with a voltage of 5 V. The module allows to receive commands from the IR transmitter. The...
Index: DFR-11267
Index: DFR-11267
Module with green LED, it is equipped with a Gravity connector, it is ideal for working with Arduino. The LED glows, when the pin signal switches to a low state.
Index: DFR-11270
Index: DFR-11270
Module with blue backlight, equipped with a connector Gravity is ideal for working with Arduino. The LED glows, when the pin signal switches to a low state.
Index: DFR-11269
Index: DFR-11269
DFRobot Gravity - 2x16 I2C LCD display - green
LCD display 2x16 characters with backlight in green. Communicates with two-wire I2C bus. The kit includes a cable adapted to Gravity DFRobot IO Expansion Shield.
Index: DFR-12363
Index: DFR-12363
Gravity - Thermocouple MAX31855K - I2C temperature sensor
Module MAX 31855K together with thermocouple allows to measure high temperatures with high accuracy. It o perates in the range from 0 °C to 800 °C with a supply voltage from...
Index: DFR-12473
Index: DFR-12473
DFRobot Solar Power Manager 9V/12V/18V
Module managing energy from solar panels . Powered by 9 V / 12 V / 18 V panels. It has converter with outputs 5 V / 1,5 A; 3,3 V / 1 A; 9 V, 12 V / 0,5 A, so it can be...
Index: DFR-12496
Index: DFR-12496
Gravity - segment display 8-digital I2C - red - DFRobot DFR0646-R
The 8-digit, 8-segment Gravity series display allows you to adjust the brightness of the characters displayed, thanks to a 16-degree adjustment. The device has an I2C...
Index: DFR-16311
Index: DFR-16311
Monochrome OLED graphic display 0,91'' 128x32px I2C - DFRobot DFR0648
Graphic OLED display with white characters on black background, monochrome . The screen size is 0.91" and the resolution is 128 x 32 px. The display uses SSD1306 chip ,...
Index: DFR-16711
Index: DFR-16711
DFRobot micro: Maqueen Plus V2.1 - advanced education robot platform - DFRobot MBT0021-EN
Advanced educational robot platform micro: Maqueen Plus V2.1 , designed to work with the BBC micro:bit module. The plus version is optimized for better power management and...
Index: DFR-17312
Index: DFR-17312
DFRobot barcode and QR reader GM65 - DFR0660
The CM65 module is designed for accurate reading barcodes or QR codes . It works at high speed (about 1 s) in low-light areas. It uses an intelligent image...
Index: DFR-17551
Index: DFR-17551
DFrobot eClip - module tester/programmer AVR/Arduino
Tool for programming and testing small circuits that support ICSP or FTDI serial connection. It has pogo pins in 2 × 4 configuration. Kit for self-assembly.
Index: DFR-04576
Index: DFR-04576
DFRobot LED Keypad Shield - Shield for Arduino
Shield for Arduino with 4-digit ,8-segment display with common cathode. In addition, the board has 5 buttons. The device operates with 5 V voltage.
Index: DFR-05516
Index: DFR-05516
DFRobot Gravity Self-Locking Switch
Digital bistable switch with 3-pin connector. It is powered with the voltage from 3.3 V to 5 V, it works with Arduino modules. Each press changes its status to opposite.
Index: DFR-06290
Index: DFR-06290
DFRobot - 43x9mm Wheels - 2pcs.
Wheels from DFRobot with rubber tire. Wheel width is 9 mm and a diameter is 43 mm. The set includes 2 pieces.
Index: DFR-08107
Index: DFR-08107
GPS USB/TTL module for Raspberry
GPS module based on the L80-R-39 system. It supports 66 search channels and 22 tracking channels. It is working with the voltage of 3.3 V - 5 V. The module has the USB and the...
Index: DFR-09383
Index: DFR-09383
DFRobot Gravity - digital IR transmitter
Digital IR transmitter from the Gravity, operating at a frequency of 38 kHz with a voltage of 5 V. The module communicates with an IR transmitter, after pairing the modules.
Index: DFR-11268
Index: DFR-11268
Module with red backlight, is equipped with a Gravity connector ideal for working with Arduino. The LEd glows, when the pin signal switches to a low state.
Index: DFR-11271
Index: DFR-11271
DFRobot Gravity - digital crash sensor (right)
The module is equipped with limit switch with lever with roller, it is designed for Arduino. It is powered with the voltage of 5 V.
Index: DFR-11266
Index: DFR-11266
DFRobot Gravity - line tracking sensor - reflective, digital
Digital sensor of tracking the line, reflective for Arduino, it can detect the white and black lines. Separate signals provides a stable output signal TTL, so it looks for more...
Index: DFR-11273
Index: DFR-11273