- New
- Sale
- Sale
- Reduced price
- Sale
- Sale
- Sale
- Reduced price
- Sale
- Sale
- Sale
List of products by brand DFRobot - Strona 8
Loading...
DFRobot Gravity - RTC SD2405 I2C - real time clock module
Module with real time clock SD2405 has a dual power supply system, when there is a lack of the main power supply, the module automatically switches to battery power.
Index: DFR-09380
Index: DFR-09380
DC Motor with Gear 6V 100RPM + encoder
Motor with 75:1 gearing, 100 rpm , 6.5 kg*cm (0.64 Nm) torque. DC current is 3.0 A. The device has a quadrature encoder with a resolution of 11 pulses per revolution (after...
Index: DFR-09530
Index: DFR-09530
DC Motor with Gear 6V 300RPM + encoder
Motor with 20:1 gearing , 300 rpm , 3.6 kg*cm (0.35 Nm) torque. DC current is 2.7 A. The device has a quadrature encoder with a resolution of 11 pulses per revolution (after...
Index: DFR-09527
Index: DFR-09527
DC Motor with Gear 6V 210RPM + encoder
Motor with 34:1 gearing , 210 rpm, 10.0 kg*cm (0.9 Nm) torque. DC current is 3.2 A. The device has a quadrature encoder with a resolution of 11 pulses per revolution (after...
Index: DFR-09531
Index: DFR-09531
Water generator with 5.0 volt output at 4/min flow rate. Threads are 1/2," works with pressures up to 1.0 MPa. The maximum output current is 150 mA. Battery not included.
Index: DFR-09537
Index: DFR-09537
DFRobot Gravity v2.0 - relay 1 channel - 277VAC / 16A contacts - 5V coil
Module with relay that allow for the control of the actuators through the ports of the microcontroller. The kit includes a cable adapted to DFRobot IO Expansion Shield.
Index: DFR-11262
Index: DFR-11262
DFRobot Gravity - IR receiver 38kHz
The IR receiver from the Gravity series, operating at a frequency of 38 kHz with a voltage of 5 V. The module allows to receive commands from the IR transmitter. The...
Index: DFR-11267
Index: DFR-11267
Module with green LED, it is equipped with a Gravity connector, it is ideal for working with Arduino. The LED glows, when the pin signal switches to a low state.
Index: DFR-11270
Index: DFR-11270
Module with blue backlight, equipped with a connector Gravity is ideal for working with Arduino. The LED glows, when the pin signal switches to a low state.
Index: DFR-11269
Index: DFR-11269
Gravity - Thermocouple MAX31855K - I2C temperature sensor
Module MAX 31855K together with thermocouple allows to measure high temperatures with high accuracy. It o perates in the range from 0 °C to 800 °C with a supply voltage from...
Index: DFR-12473
Index: DFR-12473
CR123A Li-ion battery holder for micro: Maqueen - DFRobot FIT0611
Specially designed power supply module with CR123A lithium-ion battery cage for the micro robot: Maqueen. The module also acts as a charger with a microUSB port, maximum...
Index: DFR-15097
Index: DFR-15097
Gravity - segment display 8-digital I2C - red - DFRobot DFR0646-R
The 8-digit, 8-segment Gravity series display allows you to adjust the brightness of the characters displayed, thanks to a 16-degree adjustment. The device has an I2C...
Index: DFR-16311
Index: DFR-16311
DFRobot barcode and QR reader GM65 - DFR0660
The CM65 module is designed for accurate reading barcodes or QR codes . It works at high speed (about 1 s) in low-light areas. It uses an intelligent image...
Index: DFR-17551
Index: DFR-17551
DFRobot Gravity Self-Locking Switch
Digital bistable switch with 3-pin connector. It is powered with the voltage from 3.3 V to 5 V, it works with Arduino modules. Each press changes its status to opposite.
Index: DFR-06290
Index: DFR-06290
GPS USB/TTL module for Raspberry
GPS module based on the L80-R-39 system. It supports 66 search channels and 22 tracking channels. It is working with the voltage of 3.3 V - 5 V. The module has the USB and the...
Index: DFR-09383
Index: DFR-09383
DFRobot Gravity - 2x16 I2C LCD display with RGB backlight - for Arduino
LCD display 2x16 characters with backlight in any color palette RGB. It communicates with the two-wire I2C bus. The kit includes a cable adapted to Gravity DFRobot IO Expansion...
Index: DFR-09538
Index: DFR-09538
DFRobot Gravity - digital IR transmitter
Digital IR transmitter from the Gravity, operating at a frequency of 38 kHz with a voltage of 5 V. The module communicates with an IR transmitter, after pairing the modules.
Index: DFR-11268
Index: DFR-11268
DFRobot Gravity - digital crash sensor (right)
The module is equipped with limit switch with lever with roller, it is designed for Arduino. It is powered with the voltage of 5 V.
Index: DFR-11266
Index: DFR-11266
Module with red backlight, is equipped with a Gravity connector ideal for working with Arduino. The LEd glows, when the pin signal switches to a low state.
Index: DFR-11271
Index: DFR-11271
DFRobot Gravity - line tracking sensor - reflective, digital
Digital sensor of tracking the line, reflective for Arduino, it can detect the white and black lines. Separate signals provides a stable output signal TTL, so it looks for more...
Index: DFR-11273
Index: DFR-11273
DFRobot Gravity - digital button Tact Switch - red
Digital monostable switch with 3-pin connector. It is powered with the voltage from 3.3 V to 5 V, it works with Arduino modules.
Index: DFR-11277
Index: DFR-11277
DFRobot Micro: IO-BOX - expansion board for BBC micro:bit
Micro: IO - BOX is a multifunctional micro:bit expansion board with a number of possibilities. Despite its compact size, it is equipped with a number of useful elements, such...
Index: DFR-14424
Index: DFR-14424
MXChip Microsoft Azure IoT Developer Kit - DFRobot DFR0512
IoT development board based on STM32F412 ARM Cortex M4F. It is equipped with WiFi module, OLED display, audio codec, motion, pressure, temperature, humidity and magnetometer...
Index: DFR-15093
Index: DFR-15093
IO Expansion HAT for Raspberry Pi 4B/3B+/3B/2B - DFRobot DFR0566
Overlay for Raspberry Pi mini-computer in 4B / 3B+ / 3B / 2B version, where individual sections of Raspberry Pi outputs have been separated , such as: digital, analog, PWM,...
Index: DFR-15713
Index: DFR-15713