Step-Up/Step-Down Voltage Regulator S13V10F5 - 5V 1A - with headers - Pololu 4083

Index: PLL-21751
Step-up / step-down voltage converter Pololu S13V10F5 with soldered male goldpin connectors. The output voltage of the converter is 5 V, and its current efficiency is 1 A. The input voltage range is 2.8V to 22V . Step-up / step-down converters are useful in applications where the supply voltage can vary considerably, such as with batteries. The regulator's efficiency ranges from 85% to 95% and can deliver approx. 1 A current depending on the input voltage.
Step-Up/Step-Down Voltage Regulator S13V10F5 - 5V 1A - with headers - Pololu 4083
€8.90
€7.24 tax excl.
Available
Shipping in 24 hours
PayPal payment
S13V10F5 - Pololu 4083 - connectors:
Manufacturer: Pololu

Product description: S13V10F5 - step-up / step-down converter - 5 V 1 A - Pololu 4083 - with connectors

Step-up / step-down voltage converter Pololu S13V10F5 with soldered male goldpin connectors. The output voltage of the converter is 5 V, and its current efficiency is 1 A. The input voltage range is 2.8V to 22V . Step-up / step-down converters are useful in applications where the supply voltage can vary considerably, such as with batteries. The regulator's efficiency ranges from 85% to 95% and can deliver approx. 1 A current depending on the input voltage. The converter is equipped with an undervoltage lock, output overvoltage protection and overcurrent protection. The overtemperature shutdown function also helps prevent damage from overheating, while the soft-start function limits the inrush current and gradually increases the output voltage during startup.

Step-up / step-down converter 5 V / 1 A
Step-up / step-down converter 5 V / 1 A.
Converter 5 V / 1 A with connectors Converter 5 V / 1 A with connectors.

Main features of the step-up / step-down converter

  • Input voltage: 2.8 V to 22 V
  • Output voltage: 5V with an accuracy of 3%
  • Typical maximum output current: 1A
  • Typical efficiency: 85% to 95% depending on input voltage and load
  • Typical quiescent current: 10 mA to 20 mA without load
  • Input undervoltage lockout and input overvoltage protection
  • The soft-start function limits the inrush current and gradually increases the output voltage
  • Over-current protection and cut-off against overheating
  • Fixed switching frequency: ~ 500kHz
  • Soldered goldpin male connector
  • Compact size: 8.9 x 12.1 x 4.2mm

The pins of the module

The voltage regulator module is equipped with three connectors: input voltage (VIN) , ground (GND) and output voltage (VOUT) . The input voltage (VIN) range is 2.8 V to 22 V. The VOUT connector provides 5 V output voltage from the inverter. The module has a soldered goldpin male strip. With it, the module can be plugged directly into the breadboard .

The converter is attached to the contact plate The converter is attached to the contact plate.
The efficiency of the Pololu converter The efficiency of the Pololu converter.

Typical inverter performance

The efficiency of an inverter, defined as (power output) / (power input), is an important measure of its efficiency. especially when it comes to battery life or heat generation.

Maximum continuous output current

The maximum value of the output current reached by the controller varies with the input voltage, but also depends on other factors such as ambient temperature, air flow and heat absorption. The diagram shows the maximum output currents that the controller can deliver continuously at room temperature, without airflow and additional heat dissipation.

Maximum output current Maximum output current.
Current consumption by the converter Power consumption.

System quiescent current

The quiescent current is the current that the inverter uses to power itself, and the graph shows this as the input voltage.

Specification of the Pololu step-up / step-down converter module

  • Input voltage: 2.8 V to 22 V
  • Output voltage: 5V
  • Continuous output current: typical 1A
  • Maximum quiescent current: 20 mA
  • Connector: soldered, male goldpin
  • Dimensions: 8.9 x 12.1 x 4.2 mm
  • Weight: 0.6 g

Kit contents

  • S13V10F5 - step-up / step-down converter - 5V 1A - Pololu 4083 - with connectors
  • Simple 1x 3-pin goldpin strip, 2.54 mm pitch
Kit contents The set also includes goldpin connectors.

Voltage to 2.8 V
Voltage from 22.0 V
Voltage output from 5.0 V
Output voltage to 5.0 V
Current 1 A
Stabilizer - Type2 linear
Stabilizer - Type step-up/down
Package width 7 cm
Package height 5 cm
Package depth 1 cm
Package weight 0.002 kg

Be the first to ask a question about this product!

Customers who bought this product also bought:

Products from the same category: