Capacitive touch screen IPS LCD, 7" (C) 1024x600px HDMI + USB Rev 4.1 for Raspberry Pi + case black and white - Waveshare 11303

Index: WSR-05337 EAN: 5904422371340

Capacitive touchscreen Waveshare, 7 " for the Raspberry Pi with a resolution of 1024 x 600 px. Works with Raspberry Pi version 4B, 3B+ 3B+ 2B, 1B+, 1B, 1A and Zero, and Zero W via HDMI and USB cable. The set also includes black-and-white case which holds minicomputer with a fixed screen.

Capacitive touch screen IPS LCD, 7" (C) 1024x600px HDMI + USB Rev 4.1 for Raspberry Pi + case...
€51.90
€42.20 tax excl.
Available
Shipping in 24 hours
PayPal payment
Manufacturer: Waveshare
Compatibility: Raspberry Pi

Description

Capacitive touch screen 7 ", for the Raspberry Pi with a resolution of 1024 x 600 px. Works with any version of the Rasbperry Pi via HDMI connector and microUSB - appropiate cables are included in the package. The device also works with minicomputers:Banana PiandBeagle Bone Black. A special case for the Raspberry and the screen in black-and-white are also in the kit.

 

The device communicates via the HDMI cable (picture) and microUSB slot (touch). Both wires are included in the package.

Connect to the Raspberry Pi

In order to run screen, you must connect the device to a Raspberry Pi via the supplied wire: HDMI and microUSB. HDMI transmits the image, a USB port receives data of the touch interface.

 

 

Example of connecting the screen to the Raspberry Pi.

Connecting to Windows 7 / 8 / 8.1 / 10

To connect the screen to the computer with Windows, you need to connect the USB of screen with USB of computer and HDMI port screen with the HDMI port on your computer. For the screen to be correctly detected, it is recommended to connect first the USB cable. After connecting, the screen is immediately ready for use, the picture and touch functions also. 

Connecting to the Raspberry Pi

The screen works with the latest operating system Raspbian without the need to install drivers. However, in order that the screen displays the picture properly, you should change the resolution in the configuration file. To do this, open the file config.txt with command:

  • sudo nano /boot/config.txt

and then at the end add the following instructions:

  • max_usb_current=1
  • hdmi_group=2
  • hdmi_mode=87
  • hdmi_cvt 1024 600 60 6 0 0 0
  • hdmi_drive=1

 

After saving the file and rebooting the raspberry, image and the touch function should work fine.

A detailed description of the connecting can be found onthe website of the manufacturer.

 

Specification

  • Screen type: touchscreen, capacitive
  • Diagonal: 7 "
  • Resolution: 1024 x 600 px
  • Works with:
  • Also works with all HDMI devices (touch function not available then)
  • 4 mounting holes (screws included in the package)
  • Screen size: 165 x 99 mm
  • Case in black-and-white
  • The possibility of installing at an angle of 45° or 60°
  • Material: acrylic

Assembly of the housing

The case allows you to install the screen along with minicomputer Raspberry Pi in the back.

An example of setting the screen in the housing.

Set includes

  • Screen 7", touch, capacitive
  • HDMI cable
  • HDMI - microHDMI adapter
  • Mounting screws
  • USB cable - microUSB for touch interface
  • Enclosure for Raspberry and screen - black-and-white

 

Screen - type LCD IPS
Screen - diagonal 7''
Screen - interface HDMI+GPIO
Screen - touch yes
Screen - resolution 1024x600px
Package width 20.7 cm
Package height 5.271 cm
Package depth 14.9 cm
Package weight 0.52 kg

Tobiasz

11/15/21

Question: Hello, does this screen have a built-in battery in it and doesn't need to be plugged in all the time?
Answer: Unfortunately, no. This screen has no battery.

Product reviews

Capacitive touch screen IPS LCD, 7" (C) 1024x600px HDMI + USB Rev 4.1 for Raspberry Pi + case black and white - Waveshare 11303

5/5

Average grade

13

Customers opinion
The following opinions are collected
and verified by
an external partner Trustmate
and come from the post-purchase process.

Reviews:

Jan 19.01.2024 Confirmed purchase Translated review
It's OK 🆗!!!!!!
Szymon 13.12.2023 Confirmed purchase Translated review
Everything is OK, the display is clear and responsive.
Jarosław 24.10.2023 Confirmed purchase Translated review
The display works as described. The casing took a quarter of an hour to assemble. It could be better to stick to the display, or overlap it slightly, but it's good enough as it is.
Rafał 06.06.2023 Confirmed purchase Translated review
Very good
Zbigniew 21.12.2022 Confirmed purchase Translated review
Good equipment I recommend as a 2 small computer monitor or as a test equipment or to build a tablet or something else that needs a display with touch and HDMI
Maciej 03.11.2022 Confirmed purchase Translated review
Very good image quality, the touch works as it should. The casing is a bit delicate, especially the stand, also does not protect the smc screwed on the back - it is worth thinking about a cover for the module, you can use, for example, a fragment of the rpi casing. Still, I recommend it!
Tomasz Ł. 09.04.2022 Confirmed purchase Translated review
Great display for Raspberry Pi. It's nice that spare screws and nuts have been added to the set of cables (HDMI and USB). The configuration described on the linked manufacturer's website works. The clever stand allows it to be placed more or less vertically. The display can be easily built into the housing with an aesthetic frame. There is also space for a miniature camera if needed.
Marcin P. 25.05.2021 Confirmed purchase Translated review
The display works very well with RPi 4 and Windows 10. The set includes all the necessary accessories. However, I think that this white front bezel should have a better designed grille, because it does not cover the edge of the display, which does not look very aesthetic.
Mariusz R. 21.03.2021 Confirmed purchase Translated review
Good sensitivity and precision. There was no need to calibrate.
Sebastian B. 09.02.2021 Confirmed purchase Translated review
The screen is ok, the frame is unfortunately poor, although it does the job.
Bartłomiej B. 09.02.2021 Confirmed purchase Translated review
the assembly instructions could be better, but the display is very nice
Łukasz 14.11.2022 Confirmed purchase
Jolanta 06.11.2022 Confirmed purchase

Customers who bought this product also bought:

Products from the same category: