- EOL
|
Attention! The product has been discontinued. Check other products in category. |
Description
A module made by SparkFun, is fully compatible with the RedBoard, designed for panel mounting in an unusual case. It has 14 digital input/outputs, 6 PWM channels, 6 analog inputs, as well as popular communication interfaces. On the board is the DC connector, toggle switch, LEDs, reset button, screw connection, QWIIC and microUSB connector.
|
In order to start Redboard Edge, you need to connect the system to the computer using the microUSB cable. Then, inthe Arduino IDE, choose the Arduino Uno. |
Power
The module can be powered via the miniUSB cable and the external device, for example, the AC adapter, the battery or the rechargeable battery. Switching power sources is automatic. The power supply is connected to a standard DC slot. Rechargeable battery or other source should be connected to the pins of the POWER connector.
Specification
- Supply voltage: 7 V to 15 V
- Fully compatible withArduino Uno Rev3
- The whole is made in SMD technology
- Microcontroller: ATmega328
- Maximum clock frequency: 16 MHz
- SRAM: 2 KB
- Flash memory: 32 KB (5kB reserved for bootloader)
- EEPROM: 1 KB
- I/O Ports: 14
-
- Working with voltages of 5 V
- The inputs tolerate 3.3 V voltage
- PWM outputs: 6
- Number of analog inputs: 6 (channels of A/C converter)
- Serial interfaces: UART, SPI
- MicroUSB and QWIIC connector
- External interrupts
- Soldered ISP connector
- Board sizes: 101 x 38 mm
Examples of accessories
- Gyroscopes, accelerometers, IMU- MEMS sensors withdigital output (I2C bus)
- Displays- LCD screens, on which, in a simple way, you can view the data
- Optical sensors- rangefinders, color sensors, opto-isolators
- The gas sensors - systems, allowing to detect the concentration of methane or alcohol
- DC motor drivers - systems, allowing to adjust the direction and roatry speed of motors
- Drivers of stepper motors - modules allowing to control the position of stepper motors
Useful links |
