- Reduced price
- Promotion
- Reduced price
- Promotion
- Reduced price
- Promotion
Fiberlogy Easy ABS filament 1,75mm 0,75kg - Navy Blue Transparent
Index: FLA-18635
- Reduced price
- Promotion
Zamel mROW-02 - WiFi lighting controller - Android / iOS application
Index: ZML-22298
- Reduced price
- Promotion
ELECTRONICS - Strona 47
Loading...
CJMCU SHT10 - digital temperature and humidity sensor
Humidity and temperature sensor powered with the voltage of 3.3 V. Temperature measurement range is from -40 °C to + 123,8 °C, for the humidity is from 0 to 100 % RH.
Index: MOD-09424
Index: MOD-09424
Peltier cell TEC1-12704 12V / 4A
The cooling cell applied, for example, in portable refrigerators. It is supplied with the voltage up to 12 V, it consumes up to 4 A of current. Board sizes - 40 x 40 x 4 mm.
Index: DNG-10019
Index: DNG-10019
Limit switch with lever - WK611 - 5pcs.
Limit switch with lever with the length of 25 mm. Maximum operating parameters: voltage of 250 V and current of 5 A.
Index: AKS-10824
Index: AKS-10824
Big button with an outer diameter of 6 cm with the built-in LED illuminating the dome.
Index: DNG-11814
Index: DNG-11814
WiFi module ESP-01M ESP8285 - 11GPIO, ADC, PCB Antenna
Wi-fi module based on the chip ESP8285. It works in the wi-fi 802.11 b/g/n standard. It is equipped with 18 pins - pitch of 1,6 mm, 11 of which are GPIO, 1 ADC and UART. It has...
Index: DNG-12252
Index: DNG-12252
- Reduced price
- Promotion
Waveshare touch display, capacitive 11.6" for the Raspberry Pi with a resolution of 1920 x 1080 px. Works with Raspberry Pi in versions 4B, 3B+ 3B+ 2B, 1B+, 1B, 1A and Zero...
Index: WSR-13467
Index: WSR-13467
M12 lens 3,56mm with adapter for Raspberry Pi camera - ArduCam LN033
Lens with 3.56 mm focal length and 90° viewing angle. It has been equipped with M12 mount and CS Mount adapter, so it also cooperates with Raspberry Pi HQ camera.
Index: ACM-17070
Index: ACM-17070
Pulling electromagnet 12V 14,4W 3,5kg
Tractive solenoid, which requires a voltage of 12 V to operate correctly on the coil. The device, performing linear motion, draws about 1.2 A current. The range of the pin...
Index: DNG-17763
Index: DNG-17763
Rotary potentiometer 2kOhm linear 1/5W B2K - 5pcs.
The B2K carbon-coated linear rotary potentiometer has three leads that fit on a contactor board. Connected to microcontroller's analog-to-digital converter (e.g. Arduino...
Index: DNG-19632
Index: DNG-19632
JustPi THT CF carbon resistor 1/4W 1,2Ω - 30pcs.
The set consists of 30 pieces of resistors designed for THT through-hole mounting. Resistance is 1.2 Ω and tolerance is 5%.
Index: JUS-20003
Index: JUS-20003
- Reduced price
- Promotion
DIP switch 8-pole - red - 5 pcs.
Table slide switch with 8 levers. Pins pitch: 2.54 mm, dimensions: 22 x 10 x 10 mm. 5 pcs.
Index: SWT-00369
Index: SWT-00369
Index: LED-01456
Temperature sensor DS18B20+ module - blue
Module with digital thermometer DS18B20+, equipped with 1-wire interface. The measuring range is from -55 °C to 125 °C, the supply voltage is 3.0 V to 5.5 V
Index: MOD-01506
Index: MOD-01506
Reflectance sensor KTIR0711S - with connectors
Module with reflective sensor KTIR0711S powered with the voltage of up to 5 V. It is characterized by small dimensions: 9 x 14 mm. It has soldered goldpin connectors.
Index: MOD-01744
Index: MOD-01744
MSX RTC DS1307 I2C - real time clock
Module with real time clock and backup battery (battery included). It allows you to read the time in hours, minutes, and seconds, date: month, day, year. The communication...
Index: MOD-02717
Index: MOD-02717
NTC 110 10kΩ thermistor 5% - 10pcs.
The NTC 110 thermistor with a resistance of 10 KΩ and a tolerance of 5 %.
Index: SES-04949
Index: SES-04949
WTA 5x20mm fuse - 250V/0.1A - 10pcs
Fuse type 5 x 20 mm operating up to 250 V, allowing up to 0.1 A current flow. Price per 10 pieces.
Index: KAB-05468
Index: KAB-05468
Eight-segment display x1 - 10mm red - common anode
Single 8-segment display displays digits with points and some characters.
Index: LCD-06443
Index: LCD-06443
Quick couplings UY 4CI-2006 - 5pcs
Quick connectors are used to connect two veins of the cables with a diameter of 0.5 mm. Gel-filled for protection from corrosion and moisture. Price for 5 pieces.
Index: KAB-07533
Index: KAB-07533
Markers kit for 4mm cables - 100pcs
Kit for marking cables with diameters up to 4 mm. Contains 10 markers each with numbers from 0 to 9 in different colours.
Index: KAB-07578
Index: KAB-07578
Insulated PVC Coated 30AWG Wire Wrapping Wires Reel 1000Ft - green
PVC cable wound up on a roll. It is used, for example, for alarm installation and intercoms. Length is equal to 305 m. The cable is green.
Index: KAB-08155
Index: KAB-08155
Mounting bracket for distance sensor HC-SR04 - red
Bracket for installation the distance sensor HC-SR04. It is made of red acrylic with 3 mm of thickness, it has three holes for mounting.
Index: MOD-09712
Index: MOD-09712
Hermetic connector with cable - 3pin 40cm
Sealed connector with the cable. The set includes two 3-pin cables with a female socket and male plug ended with three wires with the removed insulation. The total length of...
Index: KAB-09713
Index: KAB-09713
Grove - GSR sensor - electrical resistance of the skin
Module from the Grove series equipped with GSR sensor using the galvanic-skin reaction. It is powered with the voltage of 3.3 V or 5V. The s ensors of this type are used in...
Index: SEE-11314
Index: SEE-11314