- Reduced price
Description: Fiberlogy Easy ABS Filament 1,75mm 0,75kg - Navy Blue Transparent
Easy ABS filament designed for 3D printers in Navy Blue Transparent colour. Weight of the product is 0,75 kg, it was wound on a spool and vacuum packed with moisture absorber. The recommended printing temperature is between 235°C and 255°C. The diameter of the filament is 1.75 mm. Easy ABS filament can be used for printing various kinds of decorations, functional prototypes, RC model light housings etc. The material can be exposed to acetone vapours, so models perfectly imitate glass. Filament does not require a closed chamber during printing.
Fiberlogy Easy ABS Filament 1,75 mm 0,75 kg - Navy Blue Transparent.
In our offer of filaments you will also find other materials and colors.
Properties of the felt
- High resistance of the material to cracking under dynamic load
- Easy in 3D printing
- It can be smoothed with acetone vapor
- Does not require a closed chamber during printing
- Does not emit odour during 3D printing
Suggested parameters for printing with the filament
| Printing temperature | 235°C to 255°C |
| Table temperature | 90°C to 110°C |
| Print cooling | Not recommended when printing without a heated chamber |
|
Due to differences in the construction of printers, the above data should be treated as guidelines, and the relevant values should be determined experimentally. |
Graph of physical properties of Easy ABS felt.
Technical specification and physical properties of the felt
| Parameter | Range |
|---|---|
| Felt diameter | 1,75 mm |
| Dimensional tolerance of the filament | +/- 0.02 mm |
| Colour | Navy Blue Transparent |
| Printing temperature | 235°C to 255°C |
| Table temperature | From 90°C to 110°C |
| Density | 1.04 g/cm3 |
| Tensile modulus of elasticity | 2050 MPa |
| Tensile strength | 45 MPa |
| Water absorption | 0,7% |
| Spool material | Easy ABS |
| Moisture absorber | Yes |
| Vacuum packaging | Yes |
| Roundness | +/- 0,01 mm |
| Net weight | 0,75 kg |
