Description: Fiberlogy Easy ABS 1,75 mm 0,75 kg - Pure Transparent
Clear EasyABSfilament designed for3D printers. The product with a weight of0,75 kgwas wound on a spool and vacuum packed with moisture absorber. Recommended printing temperature ranges from 235°C to 255°C. The diameter of the filament is1,75 mm. Easy ABS filament can be used for printing various kinds of decorations, functional prototypes, RC model light housings etc. The material can be exposed to acetone vapours, so models perfectly imitate glass. Filament does not require a closed chamber during printing.
Fiberlogy Easy ABS 1,75 mm 0,75 kg - Pure Transparent.
In our offer of filaments you will also find other materials and colors.
Properties of the felt
- High resistance of the material to cracking under dynamic load
- Easy in 3D printing
- It can be smoothed with acetone vapor
- Does not require a closed chamber during printing
- Does not emit odour during 3D printing
Suggested parameters for printing with the filament
| Printing temperature | 235°C to 255°C |
| Table temperature | 90°C to 110°C |
| Print cooling | Not recommended when printing without a heated chamber |
|
Due to differences in the construction of printers, the above data should be treated as guidelines, and the relevant values should be determined experimentally. |
Graph of physical properties of Easy ABS felt.
Technical specification and physical properties of the felt
| Parameter | Range |
|---|---|
| Felt diameter | 1,75 mm |
| Dimensional tolerance of the filament | +/- 0.02 mm |
| Colour | Colourless |
| Printing temperature | 235°C to 255°C |
| Table temperature | From 90°C to 110°C |
| Density | 1.04 g/cm3 |
| Tensile modulus of elasticity | 2050 MPa |
| Tensile strength | 45 MPa |
| Water absorption | 0,7% |
| Material | Easy ABS |
| Moisture absorber | Yes |
| Vacuum packaging | Yes |
| Roundness | +/- 0,01 mm |
| Net weight | 0,75 kg |
