Motor drivers and servos - Strona 5
Program Card HW-BQ2006- HobbyWing
HobbyWing programmer for brushless motor controllers (BLDC)Remote controller 12/24V DC - 433.92Mhz - 4 channels
The radio receiver equipped with relays enables control of 4 devices operating at 250 V AC via NO/NC relay outputs. The receiver communicates with a frequency of 433.92 MHz...M3S550 - triple motor controller DC 22V/1,7A - for Arduino - Pololu 5069
Shield designed to work with Arduino, which allows you to control three DC motors powered with voltage from 1.8 V to 22 V. It communicates via the I2C interface . The...- Reduced price
- Promotion
TB6612FNG - two-channel motor controller 13.5V / 1A - Pololu 713
Pololu module with dual channel DC motor driver. It is powered from 4.5 V to 13.5 V. The continuous current per channel is 1 A, when both channels are connected the value...TB6612FNG - two-channel motor controller
Two-channel H-bridge. Continuous current per channel 1,2 A momentary up to 3,2 A. Supply voltage up to 15 V. Housing SSOP-24 (SMD).DRV8833 - two-channel motor controller 10,8V/1,2A - Pololu 2130
Two-channel driver for DC motors. Continuous current per channel 1.2 A (temporary up to 2 A). Power supply from 2.7 to 10.8 V.MC33926 - two-channel 28V/2,5A motor controller
Module with two-channel driver of DC motors MC33926 working with voltages from 5 V to 28 V. The maximum continuous output current per channel is 2.5 A.DRV8835 - two-channel motor controller 11V / 1,2A - Pololu 2135
Two-channel driver for DC motors. Continuous current per channel 1.2 A (temporary up to 1.5 A). Power supply from 2.0 to 11 V.A4988 Black - stepper motor driver RepRap 35V/2A - Pololu 2128
Stepper motor driver based on the A4988 chip. Powered by a voltage range of 8 - 35 V, with a maximum current consumption of 2 A per coil. Maximum resolution: 1/16th of a step....DRV8835 - two-channel 11V / 1,2A engine controller - overlay for Raspberry Pi - Pololu 2753
Module with two-channel circuit DRV8835 operating with voltages from 2 V to 11 V and current up to 1.2 A per channel (max. 1.5 A). It can be connected directly to the GPIO...DRV8838 - single-channel motor controller 11V/1,7A - Pololu 2990
Single-channel DC motor controller. Continuous current per channel 1.7 A (momentary to 1.8 A). Supply voltage up to 11 V.Stepper motor driver A4988 RepRap - green
Stepper motor driver based on the A4988 system. Voltage supply in the range from 8V to 35 V, with maximum current consumption of 1 A per coil. Maximum resolution: 1/16 of a...G2 High Power 24v13 - single channel motor controller 40V/13A - Pololu 2992
Single-channel high-performance DC motor controller. Continuous current per channel is 13 A (momentary up to 100 A), motor supply voltage from 6.5 V to 40 V , logical part...L298N Dual H Bridge DC StepperMotor Driver Board - Iduino ST1112
L298N dual channel DC motor controller module. It is powered from 5 V to 46 V. The maximum channel current is 2 A. The chip has a built-in 5 V voltage regulator to supply the...Tic T825 - USB stepper motor driver 45V / 2.5A - Pololu 3131
The stepper motor driver features a TI DRV8825 driver. It is powered from 8.5 - 45 V , with a maximum current consumption of 2.5 A per coil. Maximum resolution: 1/32 of a...Tic T825 - USB stepper motor driver 45V / 2.5A - assembled - Pololu 3130
The stepper motor driver features a TI DRV8825 driver. It is powered from 8.5 - 45 V , with a maximum current consumption of 2.5 A per coil. Maximum resolution: 1/32...Tic T834 - USB 10.8V / 2A stepper motor driver - Pololu 3132
The stepper motor driver features the TI DRV8834 driver. It is powered from 2.5 - 10.8 V, with a maximum current consumption of 2 A per coil. Maximum resolution: 1/32 of a...MP6500 Stepper Motor Driver Carrier, Digital Current Control - Pololu 2968
A stepper motor driver based on the MP6500 chip . Powered by a voltage range of 4.5 - 35 V, with a maximum current consumption of 2 A per coil. Maximum resolution: 1/8 step....Cytron MD10 - 1-channel motor driver 30V/10A - Shield for Arduino
Shield for Arduino with single-channel driver for DC motors operating with a voltage from 7 V to 30 V and current up to 10 A (short term 15 A). It has NMOS H-Bridge. The board...Cytron Robot Combat Controller URC10 ATmega328P + driver engines 24V/10A compatible with Arduino
Dual-channel DC motor driver. The module can control the direction of rotation, start, stop and speed of the DC motors. Continuous current per 10 A channel (temporary 30 A)....MP6500 Stepper Motor Driver Carrier, Digital Current Control (Header Pins Soldered) - Pololu 2969
Stepper motor driver based on MP6500 chip. Powered by a voltage range from 4.5 V to 35 V , with a maximum current consumption of 2 A per coil. Maximum resolution: 1/8 step....TB67S249FTG - Stepper Motor Driver 47V/1,6A with headers - Pololu 3097
Stepper motor driver based on the chip TB67S279FTG. Powered by a voltage range of 10 - 47 V, with a maximum current consumption of 4.5 A per coil. Maximum resolution: 1 /...Tic T249 - USB stepper motor driver 47V/4,5A - assembled - Pololu 3138
Stepper motor driver based on TB67S249FTG chip. Powered by a voltage range of 10 - 47 V, with a maximum current consumption of 4,5 A per coil. Maximum resolution: 1/32 of a...See also
- Computer accessories
- Automobile accessories
- Cooling
- Diodes
- Sound and acoustics
- Mounting components
- Passive elements
- Wearables (e-textiles, smart clothes)
- Cameras and recorders
- Memory cards & disks
- Communication
- Converters
- Electronics courses
- Microcontrollers
- Animal repellers
- LED lighting
- Programmers
- Relays
- Voltage regulators
- Artificial intelligence
- Integrated circuits
- Displays and screens
- Tablets and smartphones
- Consoles