- Sale
- Sale
- Sale
- Sale
- Reduced price
- Sale
SENSORS - Strona 11
Loading...
I2C hub allows you to connect several modules to one I2C bus connector on Base Shield v2 board. Using splitter you can connect 7 sensors from Grove series to one socket.
Index: SEE-04438
Index: SEE-04438
Mounting bracket for distance sensor HC-SR04 - red
Bracket for installation the distance sensor HC-SR04. It is made of red acrylic with 3 mm of thickness, it has three holes for mounting.
Index: MOD-09712
Index: MOD-09712
Gravity - Analog Waterproof Capacitive Soil Moisture Sensor V2.0 - DFRobot SEN0308
The device is designed to measure soil moisture by means of capacitive detection. DFRobot product has increased water resistance . It can be placed in the soil for a long...
Index: DFR-17377
Index: DFR-17377
DFRobot Gravity - vibration sensor with piezoelectric membrane
Analog vibration sensor with piezoelectric membrane. It is powered with the voltage from 3.3 V to 5 V, it works with Arduino modules.
Index: DFR-04713
Index: DFR-04713
QTR-8RC reflectance sensor array - digital - Pololu 961
Strap with eight reflective sensors with digital output. It is powered with the voltage of 5 V or 3.3 V.
Index: PLL-00020
Index: PLL-00020
Grove - IR receiver 38kHz 940nm
IR receiver from Grove , operating at a frequency of 38 kHz with a supply voltage from 3.3 V to 5.0 V. Maximum sensitivity is observed for the wave length of 940 nm.
Index: SEE-04419
Index: SEE-04419
Strain Beam Module - with 24-bit ADC NAU7802 - STEMMA QT / Qwiic - Adafruit 4538
This Adafruit module, equipped with the NAU7802 , allows you to read data from strain gauge beams . It includes a very high-resolution 24-bit differential ADC with...
Index: ADA-21578
Index: ADA-21578
Limit switch with folding roller - WK828
Limit switch with lever ended with roller. Maximum operating parameters: voltage of 250 V and current of 16 A.
Index: AKS-11239
Index: AKS-11239
Inveo Nano TEMP - IoT module with temperature sensor
Inveo module allows remote measurement of temperature via the Internet. It features a waterproof probe with DS18B20 temperature sensor and a 1m long wire.
Index: INV-09121
Index: INV-09121
IR beam interruption sensor - LED 3mm - 0-200cm
A motion sensor that detects the interruption of the infrared light beam transmitted between the transmitter and the receiver . The detection range is 0 cm to 200 cm ....
Index: DNG-18692
Index: DNG-18692
Sharp GP2Y0D810Z0F - digital distance sensor 10cm with PCB base - Pololu 1134
Digital distance sensor Sharp GP2Y0D805Z0F to detect objects at a distance of up to 10 cm. The system has soldered PCB stand, making it easier to use it.
Index: PLL-01623
Index: PLL-01623
Ultrasonic distance sensor URM37 v5 2-800cm with temperature correction
Ultrasonic sensor from DFRobot operating in the range from 2 cm to 800 cm. It is powered with the voltage from 3.3 V to 5,5 V. Communication is via serial interface UART (RX,...
Index: DFR-03413
Index: DFR-03413
Grove - set of 5 female-female 4-pin - 2mm/30cm with latch
A set of five 4-pin Grove wires. They are used to connect sensors with Grove Base Shield v2. Cable length is 30 cm. Version with a latch.
Index: SEE-04398
Index: SEE-04398
Inductive proximity sensor LJ18A3-8-Z / AX 8mm 6-36V
Inductive, digital proximity sensor with a cable with the length of 100 cm and nuts to facilitate mounting. It detects metal at a distance of 8 mm. The object detection is...
Index: DNG-11867
Index: DNG-11867
38 kHz IR Proximity Sensor, Fixed Gain, High Brightness - Pololu 2578
Proximity sensor, operating in the infrared range. It has a permanent amplification. This version of high brightness, consumes around 16 mA when powered at 5 V. The sensor...
Index: PLL-07622
Index: PLL-07622
Grove - 10kΩ rotary potentiometer linear lower connector
Potentiometer 10 kOhm with linear rotary. It has a 300° range of rotation. It has a 4-pin Grove connector on the other side of the handle. The kit includes a cable adapted...
Index: SEE-04430
Index: SEE-04430
Sharp GP2Y0A51SK0F - analog distance sensor 2-15cm - Pololu 2450
Analog distance sensor (rangefinder) Sharp GP2Y0A41SK0F to detect objects in the range of 2 to 15 cm.
Index: PLL-03064
Index: PLL-03064
DFRobot Gravity - digital sound generator - buzzer
Digital buzzer module for Arduino and Raspberry Pi, which can be controlled via low and high status. When changing the frequencies of the buzzer, you can hear a different...
Index: DFR-11263
Index: DFR-11263
Grove - GSR sensor - electrical resistance of the skin
Module from the Grove series equipped with GSR sensor using the galvanic-skin reaction. It is powered with the voltage of 3.3 V or 5V. The s ensors of this type are used in...
Index: SEE-11314
Index: SEE-11314
DFRobot Gravity - capacitive touch sensor
Capacitive touch sensor uses a digital interface to work. It can be powered with the voltage from 3.3 V to 5 V. It feels the human or metak touch, even through a fabric or paper.
Index: DFR-11264
Index: DFR-11264
Sound detector - microphone - SparkFun SEN-12642
Audio detector powered with the voltage ranging from 3.5 to 5.5 V. The module is easy to use, it has three outputs: an analog - to measure the intensity of the signal, digital...
Index: SPF-02211
Index: SPF-02211
SPW2430 - module with MEMS microphone - Adafruit 2716
Module with silicon microphone, MEMS type, which does not require amplifier. It detects sound with frequency from 100 Hz to 10 kHz and converts it into an analog output signal...
Index: ADA-04968
Index: ADA-04968
A01NYUB ultrasonic distance sensor 28-750cm - waterproof - DFRobot SEN0313
An ultrasonic sensor that measures by calculating the time between sending and receiving a pulse. The sensor can measure distances from 28 cm to 750 cm . It communicates...
Index: DFR-15716
Index: DFR-15716
Grove - temperature and humidity sensor DHT11 - Seeedstudio 101020011
The sensor of temperature and humidity DHT11 from the Grove series. The output is a digital signal. The temperature measurement range is from 0 °C to 50 °C and...
Index: SEE-12378
Index: SEE-12378