- Reduced price
- Promotion
- Reduced price
- Promotion
- Reduced price
- Promotion
- Reduced price
- Promotion
GJ-M12-25IR(5MP)-3 M12 25mm 5Mpx lens - for Raspberry Pi camera
Index: RPI-22483
- Reduced price
- Promotion
- Reduced price
- Promotion
ROBOTS AND MECHANICS - Strona 9
Loading...
Stepper Motor 42HS34-0406 200 steps 10V / 0,4A / 0,15Nm
Unipolar stepper motor, six wire. It has a resolution of 200 steps per revolution (1.8 degrees) . It is powered by 10 V and draws 400 mA current per coil. The torque is 1.6...
Index: AKS-11621
Index: AKS-11621
DFRobot Gravity - wired pump - peristaltic
Module connecting the PPM motor driver with a peristaltic pump. The control signal is compatible with a signal controlling the servos that can be used with different boards,...
Index: DFR-11460
Index: DFR-11460
NEMA 34 - L-type Step Motor Mount - 100x100mm
NEMA 34 standard stepper motor mount . The mount has universal mounting holes for most NEMA 34 standard motors. Mounting screws will be required for motor mounting , which...
Index: GRL-16953
Index: GRL-16953
Wheel 32x7 mm - white - 2 pieces - Pololu 1088
Set of plastic wheels (2 PCs.) with rubber tyres, providing a high adhesion. Suitable for engines with Pololu gears.
Index: PLL-00031
Index: PLL-00031
90x10mm Wheels - black - Pololu 1435
Set of plastic wheels (2 PCs.) with rubber tyres, providing a high adhesion. They are suitable for engines with Pololu gears.
Index: PLL-00454
Index: PLL-00454
Stepper Motor 42BYGHM809 400 steps 3V 1,7A 0,48Nm - SparkFun ROB-10846
Bipolar stepper motor, four-wire. It has a resolution of 400 steps per revolution (0.9 degrees) . It is powered by 3 V and draws 1.7 A per coil. Holding torque is 4.89 kg*cm...
Index: SPF-02113
Index: SPF-02113
Turbo Metal Gear Worm Motor (6V 40RPM 10kg/cm)
Metal worm gear motor for strength and high torque of 10 kg*cm (1 Nm). Supply voltage is 6V and speed is 40 rpm.
Index: DFR-06938
Index: DFR-06938
DFRobot Micro Metal Geared Stepper Motor (12V 0.6kg.cm)
Small metal stepper motor with 100:1 gearing powered by 12 V. It has a resolution of 20 steps per revolution (18 degrees). Holding torque is 0.6 kg*cm (0.06 Nm). Dimensions are...
Index: DFR-07422
Index: DFR-07422
Index: NSZ-08084
Set of 25 M5 screws , 25 mm long. The screws are used to make structures from V-Slot profiles and are made of strong steel in category 12.9 with Allen entry.
Index: VST-17347
Index: VST-17347
Micro motor N20-BT07 100:1 320RPM - 12V
The N20 series miniature motor with 100:1 gearing, has 320 RPM , torque is 2.2 kg*cm (0.216 Nm). The supply voltage is from 3 V to 12 V.
Index: DNG-12547
Index: DNG-12547
Angle holder for an inductive sensor - M30
The angular bracket for inductive proximity sensor. The base dimensions: 48 x 41 mm, dimensions of the bracket - 59 x 41 mm.
Index: AKS-11683
Index: AKS-11683
Micro motor N20-BT19 75:1 170RPM - 9V
The N20 series miniature motor with 75:1 gearing, has 170 RPM , torque is 0.6 kg*cm (0.059 Nm). The supply voltage is from 3 V to 9 V.
Index: DNG-12561
Index: DNG-12561
Nylon Distance Bolts 12mm with M3 Thread - 10pcs.
Distance made of plastic, with a length of 12 mm and M3 thread. Price is for 10 pieces. Elements of this type allow to keep a constant distance between the mounted boards.
Index: AKS-11164
Index: AKS-11164
Angle holder for an inductive sensor - M18
The angular bracket for inductive proximity sensor. The base dimensions: 43 x 26 mm, dimensions of the bracket - 46 x 26 mm.
Index: AKS-11682
Index: AKS-11682
Micro motor N20-BT03 10:1 3000RPM - 12V
N20 series miniature motor with 10:1 gearing, has 3000 rpm , torque is 0.3 kg*cm (0.029 Nm). The supply voltage is from 3V to 12V.
Index: DNG-12543
Index: DNG-12543
25Dx48L Motor with 227:1 Gear 12V 33RPM - Pololu 3233
Polol's engine with a 227:1 transmission generates 33 rpm , torque is 23 kg*cm (2.25 Nm). The motor is supplied with 12V at an average current consumption of 200mA without...
Index: PLL-16382
Index: PLL-16382
A 5-wire linear actuator, used for car central locking. The operating voltage is 12 V, current consumption is about 4 A, and the lifting force is 4.5 kg.
Index: MOT-08718
Index: MOT-08718
Micro motor N20-BT24 50:1 625RPM - 9V
The N20 series miniature motor with 50:1 gearing, has 625 RPM, torque is equal to 1.1 kg*cm (0.107 Nm). The supply voltage is from 3V to 9V.
Index: DNG-12566
Index: DNG-12566
Micro motor N20-BT32 100:1 320RPM - 9V
The N20 series miniature motor with 100:1 gearing, has 320 RPM and the torque is 2.2 kg*cm (0.216 Nm) . The supply voltage ranges from 3 V to 9 V.
Index: DNG-12591
Index: DNG-12591
Stepper Motor JK35HY26-0284 200 steps 7,4V/0,6A/0,06Nm
Bipolar stepper motor, four-wire. Has a resolution of 200 steps per revolution (1.8 degrees). It is powered by 7.4 V, draws 600 mA per coil. Torque is 0.65 kg*cm (0.064 Nm)....
Index: MOT-04849
Index: MOT-04849
Pan-Tilt HAT for Raspberry Pi - Waveshare 16138
Dedicated to the Raspberry Pi , Pan-Tilt with a camera basket. The module is equipped with an I2C communication interface and a built-in system responsible for PWM motion...
Index: WSR-14430
Index: WSR-14430
Servo PowerHD WH-65KG - standard
The WH-65KG PowerHD servo is a digital standard servo with two ball bearings . The product is powered by direct current from 6.0 to 8.4 V and has a gear made of copper and...
Index: PHD-16493
Index: PHD-16493
Pololu Micro Motor Case - SparkFun ROB-12105
Case for the popular micro-engines. It works with the Pololu series, it has the four mounting holes.
Index: SPF-02223
Index: SPF-02223