- Sale
- Sale
- Sale
- Sale
- Reduced price
- Sale
- Reduced price
- Sale
- Reduced price
- Sale
- Reduced price
- Sale
ROBOTS AND MECHANICS - Strona 10
Loading...
Micro motor N20-BT30 150:1 150RPM - 9V
The N20 series miniature motor with 150:1 gearing, has 150 RPM and the torque is equal to 1.7 kg*cm (0.167 Nm). The supply voltage ranges from 3 V to 9 V.
Index: DNG-12589
Index: DNG-12589
T-Nuts with M3 thread , for mounting accessories on V-Slot profiles .
Index: VST-17339
Index: VST-17339
DC Geared Motor with encoder-SJ02 (6V 160RPM 120:1)
Motor with the 120:1 gearing, 160 rpm, torque of 0.8 kg*cm (0.07 Nm). The device has a quadrature encoder with a resolution of 16 pulses per revolution (after the transfer of...
Index: DFR-06288
Index: DFR-06288
NEMA 17 - Aluminium L-type Step Motor Mount - Pololu 2266
Lightweight, aluminum holder for stepper motor NEMA 17. It has slots and mounting holes along with compatible M3 x 6 mm screws.
Index: PLL-02669
Index: PLL-02669
Micro motor N20-BT05 50:1 625RPM - 12V
N20 series miniature motor with 50:1 gearing, has 625 RPM, torque is 1.1 kg*cm (0.108 Nm). The supply voltage is from 3V to 12V.
Index: DNG-12545
Index: DNG-12545
Mini vibrating motor 10x2.7mm - 5V
Miniature 2.5V to 5V vibration motor with 10mm diameter and 2.7mm thickness.
Index: ODS-13807
Index: ODS-13807
Micro motor N20-BT35 150:1 200RPM - 9V
The N20 series miniature motor with 150:1 gearing, has 200 RPM , torque is 2.9 kg*cm (0.284 Nm). The supply voltage is from 3V to 9V.
Index: DNG-12594
Index: DNG-12594
Stepper Motor JK57HS76-2804 200 steps/rot 3V / 2,8A / 1,89Nm
JK57HS76-2804 bipolar four-wire stepper motor with 200 steps per revolution (1.8 degrees). It is powered by 3 V, draws 2800 mA per coil. Torque is 19.0 kg*cm (1.89 Nm)....
Index: DNG-14553
Index: DNG-14553
Toothed belt 10x198mm + gear 12T - 6mm - 2 pieces
A set of belt and compatible gears . The circumference of the belt is approximately 198 mm and the width is 10mm . The wheel has 12 teeth. The tooth surface width is 11,2...
Index: GRL-12558
Index: GRL-12558
Rubber V-belt - 2x70mm - 10pcs.
Rubber strap is used to moving the drive, for example, from the motor's shaft to another module, the thickness of the strap is 2 mm and diameter is 70 mm. The set...
Index: GRL-12557
Index: GRL-12557
Hidden V-Slot profile corner 3-sided - black
Hidden 3-sided connector for V-slot profiles in black, used to connect profiles in cube constructions. Thanks to the fastening inside the profile we gain in aesthetics...
Index: VST-17334
Index: VST-17334
Stepper Motor SY35ST36-1004A 200 steps 2.7V 1.0A 0.14Nm - Pololu 1209
Bipolar stepper motor 200 steps (1.8 degrees) supplied with a voltage of 2.7V with a current consumption of 1000 mA per coil, the torque holding 1.4 kg * cm (0.14 Nm)...
Index: PLL-00758
Index: PLL-00758
Ball Caster 3/4" - metal - Pololu 955
Metal ball in the bowl with a diameter of 0.75 inch. Perfect for supporting the front of a two-wheeled robot.
Index: PLL-00475
Index: PLL-00475
GT2 belt for building structures using traffic, one meter long. Thanks to its elasticity and tensile strength, this strap is an ideal choice when creating your own...
Index: VST-17336
Index: VST-17336
37Dx54L Motor with 70:1 Gear 12V 150RPM - Pololu 4744
Polol' s engine with a 70:1 gearbox . Its torque is 27 kg*cm and its speed is 150 rpm. Powered by 12 V DC . Current consumption is approximately 200 mA during...
Index: PLL-17053
Index: PLL-17053
Aluminium Mounting Hub 8mm M3 - 2pcs. - Pololu 2693
Hub makes it easy to mount the wheel on the motor with the shaft of 8 mm using the M3 screws. The set has two pieces.
Index: PLL-09611
Index: PLL-09611
Servo PowerHD HD-6001HB - standard
Standard servo with ball bearings. Supply voltage: 4,8 V - 6,0 V. Speed: 0.14 sec /60 °. Point: 6.7 kg (6 Volts). Dimensions: 40,7 x 20,5 x 39,5 mm. Weight: 43 gr.
Index: MOT-02311
Index: MOT-02311
DC Motor 37Dx73L with 100:1 Gear 12V 100RPM + encoder CPR 64 - Pololu 4755
Polol's 100:1 gearbox motor . 100 rpm and 34 kg*cm (3.33 Nm) torque . The motor is powered by 12 volts and has a current capacity of 200 mA without load and 5 .5A...
Index: PLL-16480
Index: PLL-16480
DFRobot Gravity - Propeller with DC 3-6V Motor Module
A small motor module with controller with speed control capability. The device is compatible with Arduino . A propeller and cable are also included.
Index: DFR-03559
Index: DFR-03559
37Dx50L Motor with 10:1 Gear 24V 1000RPM - Pololu 4689
Polol electric motor with 10:1 gearbox. Powered by 24 V DC , its speed is 1000 rpm and torque is 5.5 kg*cm . It takes up to approx. 100 mA without load and up to 3000 mA...
Index: PLL-17535
Index: PLL-17535
Servo Feetech FS5103R - standard - continuous 0-360 degrees
Standard servo. The power voltage from 4.8 V to 6 V. Operates in the range from 0 to 360 degrees. Speed: 0.16 s/60°. Torque: 3.2 kg*cm Dimensions: 40.8 x to 20.1 x...
Index: FTC-09165
Index: FTC-09165
Round aluminum servo horn Feetech FK-RP-001 - 20mm / 6mm
Aluminium servo horn made by company Feetech, diameter of 2 cm and a diameter of the mounting hole is 6 mm. It is in a circular shape. It works with standard servos. The...
Index: FTC-09198
Index: FTC-09198
The Grove module is used to atomize water. It works with a voltage of 5 V. It can be used, among other things, as a humidifier but also allows for more advanced projects where...
Index: SEE-11362
Index: SEE-11362
Wheels 32x7mm - black - 2pcs - Pololu 1087
Set of the plastic wheels (2 PCs.) with rubber tyres providing a high adhesion. They are suitable for engines with Pololu gears.
Index: PLL-00012
Index: PLL-00012