Plastic case for remote control Kradex Z122 IP53 - 108x69x25mm black
Cable combination package for Creality Sermoon V1 Pro 3D printer
Moving on to the world of electronics and working on the system Arduino or Raspberry Pi, sooner or later we will meet with the standard QWIIC developed by SparkFun Colorado in the United States. Using the I2C interface you can connect a lot of sensors, displays, actuators, cables, etc. Invite you to familiarize with the offer of our online shop where we offer You a wide range of standard Qwiic for ease of use and tinkering, without leaving home.
STEMMA QT / Qwiic JST SH 4-Pin Cable - 300mm - Adafruit 5384
Cable with Qwiic / STEMMA QT connector made by Adafruit. The cable is 300 mm long and wrapped in a flat, black rubber insulation. The cable is terminated with a 4-pin Qwiic /...
Flexible Qwiic Male Cable with 4-pin plug - 15cm - SparkFun PRT-17912
Flexible Qwiic cable with four wires terminated with 2.54 mm male connectors, which can be easily plugged into e.g. a contact board. The other end of the cable is terminated...
Flexible Qwiic Female Cable with 4-pin plug - 15cm - SparkFun PRT-17261
Flexible cable for Qwiic system, equipped with four wires terminated with standard female connector of 2.54 mm pitch and Qwiic type JST connector having 4 pins of 1 mm...
Qwiic JST Connector - SMD 4-pin - SparkFun PRT-14417
JST 4-pin SMD connector for Qwiic boards using the I2C interface. Pins pitch is 1 mm.
Qwiic flexible cable with 4-pin connector - 20cm - SparkFun PRT-17258
4-pin cable, length 20 cm . Terminated on both sides with JST Qwiic 4-pin connector with 1 mm pitch.
Qwiic female-female cable with 4-pin plug - 10cm - SparkFun PRT-14427
4-pin cable, length 10 cm . Terminated on both sides with JST Qwiic 4-pin connector with 1 mm pitch.
Flexible Qwiic Cable with 4-pin plug - 10cm - SparkFun PRT-17259
Qwiic ecosystem cable with 4 wires placed in JST connector with 1 mm pitch, cable length is 10 cm . It has been designed for simple interconnection of devices equipped...
Qwiic MultiPort - SparkFun BOB-18012
Qwiic allows you to quickly create projects using an easy-to-use connector and appropriate cables. Unfortunately not all modules are equipped with two Qwiic ports. This...
STEMMA QT / Qwiic JST SH 4-Pin Cable - 400mm - Adafruit 5385
Four-core cable made by Adafruit. The 400 mm long cable is wrapped in a flat, black rubber insulation, terminated with a 4-pin Qwiic / STEMMA QT - JST-SH plug. The plug with...
Flexible Qwiic Cable with 4-pin plug - 5cm - SparkFun PRT-17259
SparkFun four core cable for Qwiic system. The cable is terminated with JST type connector, with four pins of 1 mm pitch. Its length is 5 cm . It was designed for simple...
Qwiic Cable - Grove Adapter (100mm) - SparkFun PRT-15109
Qwiic to Grove adapter cable 100 mm long. Enables connection between SparkFun Qwiic Connect system and Grove boards based on SeeedStudio's I2C interface. The cable can be...
JST-SH 4pin connecting cable with micro hook - STEMMA QT / Qwiic - Adafruit 5037
Connection cable from Adafruit. It is equipped with STEMMA QT / Qwiic connector on one side and four micro hooks on the other. Each wire is made up of four smaller ones in...
Qwiic Cable Kit - SparkFun KIT-15081
Set of gaining more and more popularity Qwiic cables by SparkFun . Set contains 10 wires with different lengths and contacts to connect to your programming platform or...
Qwiic - male cables with female 4-pin JST plug - 15cm - SparkFun PRT-14425
Male cables with the female plug 4-pin JST Qwiic with the length of 15 cm. It facilitates the connection of components using Qwiic connectors with the prototype board or Arduino.
SparkFun Qwiic Adapter - SparkFun DEV-14495
The Qwiic adapter from SparkFun provides an ideal way to convert a regular I2C bus into a board with a Qwiic connector for simple connection. The adapter has two Qwiic...
Qwiic - Shield for Arduino - SparkFun DEV-14352
Shield for Arduino facilitating the connection of modules of SparkFun via connectors Qwiic. The shield connects the I2C bus Arduino with connectors Qwiic. As long as the...
SparkFun ESLOV to Qwiic Bridge - I2C - SparkFun BOB-23589
Another extension from SparkFun, this time in the form of an adapter that allows you to quickly connect Qwiic modules with Arduino boards. The board has one Qwiic connector...
SparkFun Qwiic SHIM for Raspberry Pi - SparkFun DEV-15794
SparkFun Qwiic SHIM is a small module applied to the GPIO pins of Raspbery, with which you can easily equip a minicomputer with a Qwiic connector. The module is plugged...
Qwiic female-female cable with 4-pin plug - 5cm - SparkFun PRT-14426
4-pin cable with the length of 5 cm. It is ended on both sides with a JST Qwiic 4-pin plug, pitch of 1 mm.
ESLOV - ESLOV - I2C - 5cm connection cable - SparkFun CAB-24012
A 50 mm long connection cable terminated with two ESLOV connectors. It has five pins - one more than standard I2C, and each line is marked with a different color . The...See also
Wire Qwiic czteropinowe fitted with connectors, through which you can easily and without risk of error connect the selected accessory. What speaks for using standard Qwiic? Of course, no need soldering - thanks to four pinom enough to use the cable Qwiic, instead of four individual wires. Polarized plugs to avoid perverse connection terminals SDA, SCL, GND and VCC are in a constant place, and don't need to think about how they connect. Please contact our office with the wires and pick suitable for your system.
Standard Qwiic gives us confidence in connection with a small circulation in the financial - connector has a step of 1 mm, which saves us space on Board of the prototype. We can connect any device with I2C interface using an adapter JST-QWIIC. The standard can be used in circuit with the second connector, in which, as a rule, have modules, all in order to expand the tire. Thus, you can use this wire Qwiic available in our store.
Deciding standard Qwiic, we get a wide access to accessories and system proven by millions of users around the world. We have access to modules such as weather stations, temperature sensors, GPS modules, distance sensors, real time clock, the sensor of the visible spectrum and many others. When choosing accessories, we invite you to our section of the wire Qwiic, where you will find the connection under your diagram of the system. In case of any doubt, we are at Your service!
