Filter by
Categories
more (2) ok clear
Manufacturers
Price
0 2917
more (-5) ok clear
Filter

Promotion products

Recomendations

Promotion

Products: 1033
Loading...

RGB Encoder Wheel Breakout - encoder module - 24 RGB LEDs - PiMoroni PIM673

RGB Encoder Wheel Breakout from PiMoroni is a navigation tool for Raspberry Pi and Raspberry Pi Pico based projects, featuring directional buttons, an encoder wheel and 24...
4.0 (1)
Index: PIM-23499
Index: PIM-23499
Shipping in 24 hours
Available
Regular price €28.90 Price €26.01
  • Reduced price
  • Promotion

Filament Fiberlogy FiberSmooth 1,75mm 0,5kg - with reusable spool - Blue

Blue FiberSmooth filament by Fiberlogy , designed for 3D printing. It is easy to process and the obtained prints are characterized by a smooth, glossy surface. The...
Index: FLA-22084
Index: FLA-22084
Shipping in 24 hours
Available
Regular price €28.90 Price €26.01
  • Reduced price
  • Promotion

Filament Fiberlogy FiberSmooth 1,75mm 0,5kg - Red

FiberSmooth filament by Fiberlogy in red , designed for 3D printing. Its special feature is the ease of processing . After it is done with isopropyl alcohol (IPA), the...
Index: FLA-22087
Index: FLA-22087
Shipping in 24 hours
Available
Regular price €28.90 Price €26.01
  • Reduced price
  • Promotion

Stepper Motor JK57HS76-2804 200 steps/rot 3V / 2,8A / 1,89Nm

JK57HS76-2804 bipolar four-wire stepper motor with 200 steps per revolution (1.8 degrees). It is powered by 3 V, draws 2800 mA per coil. Torque is 19.0 kg*cm (1.89 Nm)....
5.0 (1)
Index: DNG-14553
Index: DNG-14553
Shipping in 24 hours
Available
Regular price €32.50 Price €26.00
  • Reduced price
  • Promotion

HiFiBerry DAC+ RCA light - sound card for Raspberry Pi 4B/3B+/3/2/B+/A+/Zero

Shield, type Hat for Raspberry, version 4B, 3B+, 3B, 2B, A+, B, Zero with RCA connectors. It is used in the device of high-quality, the ESS DAC has a resolution of 24-bits, it...
5.0 (2)
Index: RHF-04876
Index: RHF-04876
Shipping in 24 hours
Available
Regular price €34.50 Price €25.88
  • Reduced price
  • Promotion

iNode MCU Relay - Bluetooth 4.1 and WiFi - for iNode Care Sensor

Programmable iNode MCU Relay designed to work with the iNode Care Sensor series. The module works wirelessly and supports Bluetooth 4.1 and WiFi communication. iNode...
Index: INO-21204
Index: INO-21204
Shipping in 24 hours
Available
Regular price €34.50 Price €25.88
  • On sale!
  • Promotion

Risers for xTool M1 - 41mm/62mm/92mm - 4pcs

A set of 4 pieces of pads enabling you to adjust the height of the xTool M1 plotter to the objects being processed. Each riser can be set in three different positions,...
Index: XTL-24456
Index: XTL-24456
Shipping in 24 hours
Available
Regular price €34.50 Price €25.88
  • Reduced price
  • Promotion

GJ-3990-7257 M12 8mm 12Mpx lens - for Raspberry Pi camera

Gaojia Opt GJ-3990-7257 lens compatible with Raspberry Pi cameras equipped with M12 mount. The lens is equipped with Fixed Focus , it can be used for portraits. It has a...
Index: RPI-22485
Index: RPI-22485
Shipping in 24 hours
Available
Regular price €29.90 Price €25.42
  • Reduced price
  • Promotion

ESP32-S3-DevKitM-1-N8 - WiFi + Bluetooth - mini development board with ESP32-S3-MINI-1/1U chip

ESP32-S3-DevKitM-1-N8 mini development board based on ESP32-S3-MINI-1/1U chip. It supports WiFi wireless communication in the 2 . 4 GHz band and Bluetooth LE in the...
5.0 (3)
Index: SOC-20740
Index: SOC-20740
Shipping in 24 hours
Available
Regular price €29.90 Price €25.42
  • Reduced price
  • Promotion

GJ-C2725-650 M12 2,7mm 15Mpx lens - for Raspberry Pi camera

The GJ-C2725-650 lens by Gaojia Opt is compatible with Raspberry Pi cameras equipped with an M12 mount. The fisheye lens can be used as a door peephole. It has a resolution...
Index: RPI-22484
Index: RPI-22484
Shipping in 24 hours
Available
Regular price €29.90 Price €25.42
  • Reduced price
  • Promotion

BME280 - digital sensor of humidity, temperature and atmospheric pressure I2C/SPI - SparkFun SEN-13676

Digital sensor allows to measure atmospheric conditions, i.e. temperature from -40 °C to 85 °C, humidity from 0 to 100 %Rh and pressure from 300 hPa to 1100 hPa . The last...
Index: SPF-04901
Index: SPF-04901
Shipping in 24 hours
Available
Regular price €29.90 Price €25.42
  • On sale!
  • Promotion

Solder Cynel LC99.3 250g/0,38mm - lead-free

Lead- free solder tin containing flux 1.1.3 . The composition of the alloy is Sn99.3Cu0.7 . The product will be used in the electronics industry, both for professional and...
Index: CYN-22979
Index: CYN-22979
Shipping in 24 hours
Available
Regular price €29.90 Price €25.27
  • Reduced price
  • Promotion

Module 13. 2 to RS232 extending communication - female connector DB9 - M5Stack M130

M5Stack's RS232 Module 13.2 is an extension to the M5Stack series of development modules that allows you to add RS232 serial communication to your design. It uses the...
Index: MSS-22909
Index: MSS-22909
Shipping in 24 hours
Available
Regular price €34.50 Price €25.24
  • Reduced price
  • Promotion

RS232 Module 13. 2 - RS232 communication module - male connector DB9 - M5 M5Stack131

M5Stack's RS232 Module 13.2 is an extension to the M5Stack series of development modules that allows you to add RS232 serial communication to your design. It is equipped with...
Index: MSS-22921
Index: MSS-22921
Shipping in 24 hours
Available
Regular price €34.50 Price €25.24
  • Reduced price
  • Promotion

WiFi ESP8266 HAT with LCD 1,14'' 240x135px display for Raspberry Pi Pico - SB Components SKU21888

The overlay created by SB Components, allows to extend Raspberry Pi Pico module with wireless WiFi IEEE 802.11 b/g/n communication via ESP8266 chip. The chip can be...
Index: SBC-20404
Index: SBC-20404
Shipping in 24 hours
Available
Regular price €27.90 Price €25.11
  • Reduced price
  • Promotion

Stepper Motor JK42HM48-1684 400 steps 3,0V/1,68A/0,43Nm

Bipolar stepper motor , four-wire. Has a resolution of 400 steps per revolution (0.9 degree). Powered by 3.0 V, draws 1680 mA per coil. Torque is 4.4 kg*cm (0.43 Nm)....
5.0 (1)
Index: MOT-03606
Index: MOT-03606
Shipping in 24 hours
Available
Regular price €27.90 Price €25.11
  • Reduced price
  • Promotion

AZO Digital DC / DC Step-Up Voltage Regulator IPS-400 - 12VDC / 230VAC 400W - car

The converter allows you to use devices that require 230V AC power through the car cigarette lighter 12V DC socket. Ideally suited for powering laptops, USB devices, printers,...
Index: AZO-12910
Index: AZO-12910
Shipping in 24 hours
Available
Regular price €27.90 Price €25.11
  • Reduced price
  • Promotion

Filament Spectrum S-FLEX 90A 1,75mm 0,5kg - Pacific Blue

Filament S-FLEX 90A is designed for 3D printing, makes it possible to create flexible elements. The diameter is 1.75 mm. The set includes 0.5 kg of filament in the color...
Index: SPC-14149
Index: SPC-14149
Shipping in 24 hours
Available
Regular price €27.90 Price €25.11
  • Reduced price
  • Promotion

M3H550 - triple motor controller DC 22V/1,7A - for Raspberry Pi - Pololu 5072

A shield for Raspberry Pi that allows you to control three motors powered by voltage from 1.8 V to 22 V. It uses the I2C interface to communicate with the minicomputer....
Index: PLL-23646
Index: PLL-23646
Shipping in 24 hours
Available
Regular price €29.50 Price €25.08
  • Reduced price
  • Promotion

Soldering iron for ZD-8917B 60W soldering station

Soldering iron for soldering station ZD-8917B power of 60 W, the supplied voltage of 24 V. It is ideal for soldering small electronic components.
Index: LUT-11945
Index: LUT-11945
Shipping in 24 hours
Available
Regular price €26.90 Price €25.02
  • Reduced price
  • Promotion

Streaming USB 3.0 cable for LattePanda - DFRobot FIT0552

Cable for transferring an image from a LattePand minicomputer to a PC/Mac or laptop. It works on the PiP (Picture in Picture) principle with the speed of light, operates at 5G....
5.0 (1)
Index: DFR-15099
Index: DFR-15099
Shipping in 24 hours
Available
Regular price €32.90 Price €24.68
  • Reduced price
  • Promotion

Filament Rosa3D Refill PLA Magic Silk 1,75mm 1kg - Gold-Silver

The spoolless PLA Magic Silk filament from Rosa3D is a material with a non-standard appearance that serves as a cartridge for 3D printers. It is a combination of two colors...
Index: ROS-24206
Index: ROS-24206
Shipping in 24 hours
Available
Regular price €32.50 Price €24.46
  • Reduced price
  • Promotion

Filament Rosa3D Refill PLA Magic Silk 1,75mm 1kg - Mistic Red

The spoolless PLA Magic Silk filament from Rosa3D is a material with a non-standard appearance used as a refill for 3D printers and printing pens. It is a combination of...
Index: ROS-24201
Index: ROS-24201
Waiting for delivery
Goods pending acceptance - available within a few days
Regular price €32.50 Price €24.46
  • Reduced price
  • Promotion

Filament Rosa3D Refill PLA Magic Silk 1,75mm 1kg - Mistic Green

The spoolless PLA Magic Silk filament from Rosa3D is a material with a non-standard appearance used as a cartridge for 3D printers and printing pens. It is a combination of...
Index: ROS-24202
Index: ROS-24202
Waiting for delivery
Goods pending acceptance - available within a few days
Regular price €32.50 Price €24.46
  • Reduced price
  • Promotion