- EOL
Attention! The product has been discontinued. Check other products in category. |
Product description: 0.56'' 4-digit display - 7-segment Backpack - I2C - blue - STEMMA QT / Qwiic - Adafruit 5601
Adafruit module with a 0.56'' 7-segment display. It enables the display of 4 digits with dots after each digit and one colon between digits 2 and 3. The digits of the module are highlighted in blue . The whole thing is controlled via the I2C interface, so there is no need to connect a large number of wires. The module is additionally equipped with two quick connect connectors - Qwiic / Stemma QT . On the board you can also find jumpers to select the I2C address, so you can connect up to eight 7-segment display modules. Module powered by 5 V or 3 V.
The subject of the sale is the display in the assembled version.
Pins of the 7-segment display
The communication module uses the I2C interface, and the board also includes 2 Qwiic / STEMMA QT connectors for quick connection to modules with the same connector.
- VCC - supply voltage 5 V / 3 V
- GND - system ground
- SDA - data line of the I2C interface
- SCL - clock line of the I2C interface
More information on how to connect can be found here .
Technical specification of the display module
- Type: segment display
- Number of segments: 7
- Control system: HT16K33
- Number of digits: 4
- Number of dots: one after each number and one colon between the number 2 and 3
- Backlight color: blue
- Interface: I2C
- I2C address: configured with jumpers from 0x70 to 0x77
- Leads: solder pads / Qwiic connectors / STEMMA QT
- Module dimensions: 50.0 x 26.7 x 6.0 mm (without display)
- Display dimensions: 19 x 50 x 14 mm
- Weight: 14g
Kit contents
- 0.56'' 4-digit display - 7-segment Backpack - I2C - blue - STEMMA QT / Qwiic - 1 piece
- Golpin strip 1x6 pin - raster 2.54 mm - 1 piece
Also check the manufacturer 's user guide !
Useful links |