The Raspberry Pi is a series of microcomputers that attracted both experienced programmers and novice robotics fans. The range of possibilities of their use is huge, which also results in their versatility. We could see the famous Raspberry for the first time in 2012, when its first version was released. Year after year, we have observed changes and improvements, which was conditioned by changing trends on the market, newly emerging technologies, as well as increasing expectations of demanding customers. Raspberry Pi can be both an alternative to PC, as well as an element of the monitoring system and smart home. It is used in creating weather stations, but at the same time it works well in various kinds of robots. It can be connected to various kinds of outdoor devices. It is possible due to GPIO connectors. They enable the Raspberry Pi to have an LCD display and an interface with buttons. This is how a home lighting system or a building automation system is created, for example. Our offer is designed to meet the current needs of our customers. You will find a wide range of HAT overlays compatible with Raspberry Pi equipment.
- Reduced price
- Promotion
- Reduced price
- Promotion
- Reduced price
- Promotion
M5Stack RoverC Pro - robot platform with wheels and gripper
Index: MSS-18102
- Reduced price
- Promotion
- On sale!
- Promotion
- Reduced price
- Promotion
WEP 992D - Soldering station 2in1 hotair and soldering iron
Index: LUT-12653
- Reduced price
- Promotion
Raspberry Pi GPIO extensions
Loading...
Raspberry Pi PoE+ HAT - Power over Ethernet for Raspberry Pi 4B/3B+ - SC0468
Cap designed for Raspberry Pi 3B+ and 4B versions which are equipped with 4-pin PoE connector. It allows simultaneous communication with LAN and powering the minicomputer...
Index: RPI-19537
Index: RPI-19537
Raspberry Pi M.2 HAT+ for NVMe drives and M.2 accessories for Raspberry Pi 5
Raspberry Pi M.2 HAT+ allows you to connect M.2 peripherals, such as NVMe drives and AI accelerators, to the PCIe 2.0 interface on Raspberry Pi 5. It provides fast data...
Index: RPI-24601
Index: RPI-24601
4-channel logic level converter
The module allows to exchange data between systems that use the most popular levels of voltage: 5 V <-> 3.3 V and 3.3 V <-> 1,8 V. It works in both directions simulatneously....
Index: MSX-06117
Index: MSX-06117
Power over Ethernet HAT (E) is a shield for Raspberry Pi in version 3B+ and 4B . It allows you to simultaneously obtain a network connection in the 802.3af standard and to...
Index: WSR-22399
Index: WSR-22399
MCP23017 - I2C 16-channel output expander
The system allows to increase the number of pins (up to 16 ) of the microcontroller (including minicomputer of Raspberry Pi). It communicates with the central unit via the I2C...
Index: UCC-02556
Index: UCC-02556
Raspberry PI 4/3/B+/2 GPIO Expansion Board E1 - blue
The board provides the connection of the three modules to each of the GPIO pins of the Raspberry Pi. It has 3 rows of goldpin connectors, 40 pieces in each.
Index: MOD-07149
Index: MOD-07149
ProtoPi Plus Side - extension GPIO Raspberry Pi 4/3/2/B for breadboard + tape
The module allows you to connect the GPIO leads of the Raspberry Pi 4, 3, 2 and B plus minicomputer to popular 830-hole contact boards using the included 40-wire tape. The...
Index: MSX-02927
Index: MSX-02927
Raspberry Pi AI HAT+ is a cap that extends the capabilities of the Raspberry Pi 5 with the Hailo AI accelerator, which provides simple, efficient and energy-efficient...
Index: RPI-25674
Index: RPI-25674
RTC module DS3231 I2C - real time clock
Module with real time clock, allows you to read the time in hours, minutes, and seconds, and to read the date: month, day, year. The device was based on the DS3231 system,...
Index: MOD-03790
Index: MOD-03790
Logic level bi-directional converter, 4-channel - SparkFun BOB-12009
The module allows to exchange data between systems that use the most popular voltages levels: 5 V and 3.3 V and 1.8 V and 2.8 V. Works in both directions simultaneously. It has...
Index: SPF-02259
Index: SPF-02259
GPIO pin header expander for Raspberry Pi 3/2 / B + with quick couplers - cascade
An expansion board that allows you to easily connect the modules to the GPIO pins on a Raspberry Pi. Board is combined with minicomputer via 40-strip ribbon . It has goldpin...
Index: DNG-11800
Index: DNG-11800
The Power over Ethernet HAT (C) is a module in the form of a HAT overlay that is designed for the Raspberry Pi. It is compatible with 3B+ and 4B versions of the minicomputer. It...
Index: WSR-18771
Index: WSR-18771
Grove Base Kit for Raspberry Pi 4B/3B+ a set for beginners
Grove it modular to create simple projects using components based on the same interface. The kit includes Grove Base Hat + 10 modules and sensors.
Index: SEE-14420
Index: SEE-14420
Extension GPIO Raspberry Pi 3/2/B+ to the contact plate + tape
The module allows connection of the GPIO leads of the minicomputer Raspberry Pi 3, 2 and B + to popular breadboards with 830 and 400 holes, using an attached to the set,...
Index: RPI-02892
Index: RPI-02892
MCP23018-E/SP - 16-Bit I/O Expander with Open-Drain Outputs
The system allows to increase the number of pins (up to 16) of the microcontroller (including minicomputer Raspberry Pi). It communicates with the central unit via the I2C bus...
Index: UCC-06506
Index: UCC-06506
MCP23017 Expansion Board - 16 I/O - for Arduino and Raspberry Pi - Waveshare 15391
Expander of pins on the basis of the MCP23017 system, it extends the capabilities of the Arduino or Raspberry Pi with additional 16 pins of I/O. It communicates via I2C...
Index: WSR-13466
Index: WSR-13466
Raspberry Pi DAC Pro - sound card for Raspberry Pi 4B/3B+/3B
The Raspberry Pi DAC Pro is based on the Burr Brown PCM5242 32-bit / 384 kHz converter, allows for Full HD 24-bit / 192 kHz audio playback. The module is equipped with two...
Index: RPI-18616
Index: RPI-18616
Raspberry Pi SSD Kit 256GB for Raspberry Pi 5
The Raspberry Pi SSD Kit consists of a Raspberry Pi M.2 HAT+ and an official 256 GB Raspberry Pi SSD NVMe drive . The SSD Kit is the perfect solution for Raspberry Pi 5...
Index: RPI-25485
Index: RPI-25485
Logic level bi-directional converter, 4-channel - Pololu 2595
Miniature (13 x 10 mm). the module allows to exchange data between systems that use the most popular voltage levels ranging from 1.5 V to 18 V and Vice versa. Four channels to...
Index: PLL-02523
Index: PLL-02523
Hub USB Hat - 4-port hub for Raspberry Pi 4B/3B+/3B/Zero - Waveshare 12694
Hat for the Raspberry Pi that adds 4 USB ports and a converter USB-UART. The device has dimensions of 65 x 30 mm, it works with Raspberry Pi 4B/3B+/3B and Zero and Zero W.
Index: WSR-08870
Index: WSR-08870
ReSpeaker v1.1 for Raspberry Pi - modul with 2 microphons - Seeedstudio 107100001
ReSpeaker is an expansion board for the Raspberry, equipped with 2 microphones, it is designed for AI and voice applications. It allows you to build efficient devices, which,...
Index: SEE-11408
Index: SEE-11408
LTE GPS HAT - LTE / GPRS / GPS SIM7600E-H - for Raspberry 4B/3B+/3B/2B/Zero - Waveshare 14952
Shield for Raspberry Pi that allows you to send text messages and create calls in the GSM network. It also has a GPS module. It supports LTE CAT4 up to 150 Mbps. It...
Index: WSR-12533
Index: WSR-12533
WIZnet Ethernet HAT - W5100S - overlay for Raspberry Pi Pico - WIZnet
Trim for Raspberry Pi Pico equipped with the Ethernet TCP/IP W5100S system, which provides Internet connectivity via the Ethernet connector. The board supports wired Internet...
Index: WIZ-22395
Index: WIZ-22395
Raspberry Pi SSD Kit 512GB for Raspberry Pi 5
The Raspberry Pi SSD Kit includes a Raspberry Pi M.2 HAT+ and an official Raspberry Pi 512GB NVMe SSD . It's the perfect solution for Raspberry Pi 5 users who want the...
Index: RPI-25484
Index: RPI-25484
See also
Using HAT overlays. What do you actually need them for?
Each HAT overlay is a small 65mm x 56mm board with rounded corners. The overlay is attached to the casing using screws, which can be placed through special holes located on the overlay. Furthermore, it features a 40-pin GPIO connector, which is compatible with Raspberry Pi. The automatic system configuration for the GPIO connector and driver files is an important support for the layout of the outputs. How is it possible that the configuration happens automatically? This is due to the ID_SD and ID_SC outputs. Through the I2C interface they connect to a built-in EEPROM, which contains all the configuration software needed for each GPIO pin. The memory also contains a Device Tree file, which provides information about the HAT board, is its description. This allows Linux to automatically install the software.
HAT overlays available in our shop are dedicated to Raspberry Pi 4 or Raspberry Pi 3, but also to older versions. Thus you have the possibility to use them in practically every Raspberry model offered on the market. Due to HAT overlays you can design and create a complex building management system by connecting additional peripheral devices to Raspberry.
40-pin GPIO connector for receiving and transmitting signals
Raspberry stands out in many ways, which even amateur programmers cannot ignore. One such feature is the 40-pin GPIO connector. It is responsible for connecting external devices to the hardware, and thus for expanding Raspberry in order to create a system with specific capabilities and purposes. These devices eventually work with Raspberry Pi. The connector is used to transmit input signals to control external processes. Moreover, using them we receive the input signals, which allows us to issue further commands. Thanks to HAT overlays you will create, among others, a weather station, which will have sensors of wind speed, precipitation intensity and temperature. Moreover, you have a chance to design your own LED lighting controller, and so such a light source, which is currently considered to be the most energy-efficient. Advanced technology allows the system to change the colour of light and create spectacular light games. HAT overlays are also used in the automation of entrance gates and garage irrigation of green areas, both private and public. WiFi and Bluetooth are used for this purpose. In the same way you will also create a monitoring system for your house, property and car. Another application of HAT overlays is sound system for the room and the car. To create it, you need a sound card. It will give you strong and clear sound.
