- New
- On sale!
- Promotion
- On sale!
- Promotion
- On sale!
- Promotion
Filament Polymaker PolySonic High Speed PLA 1,75mm 1kg - White
Index: PLM-23935
- Reduced price
- Promotion
Raspberry Pi GPIO extensions - Strona 5
Loading...
JustBoom Digi Zero - sound card for Raspberry Pi Zero
Shield for Raspberry Pi Zero with high quality S/PDIF interface. It is used in the device, system has a resolution of 24 bit with the clock speed of 192 kHz. It has a...
Index: SUP-09579
Index: SUP-09579
Serial Pi Plus MAX3232 - RS232 interface for Raspberry Pi
Shield for Raspberry Pi, version 4B, 3B+, 3B, 3, 2B, Zero with system MAX3232 which allows for communication via the RS232 interface. The module has a converter which...
Index: ABE-11707
Index: ABE-11707
- On sale!
- Promotion
Overlay for Raspberry Pi equipped with BME280 temperature, pressure and humidity sensor, LTR-559 light and proximity sensor, MICS6814 analog gas sensor, ADC ADS1015...
Index: PIM-17074
Index: PIM-17074
The Voice Bonnet is a module manufactured by Adafruit that is compatible with the popular Raspberry Pi minicomputer. It has a connector for two speakers and for two...
Index: ADA-19002
Index: ADA-19002
The Adafruit module is equipped with the TCA8418 chip working as a matrix keyboard controller. The chip has a total of 18 I / O pins in a 10 column and 8 row arrangement...
Index: ADA-21996
Index: ADA-21996
M3H550 - triple motor controller DC 22V/1,7A - for Raspberry Pi - soldered - Pololu 5071
A shield for Raspberry Pi that allows you to control three motors powered by voltage from 1.8 V to 22 V. It uses the I2C interface to communicate with the minicomputer....
Index: PLL-23647
Index: PLL-23647
- Reduced price
- Promotion
PiClock RTC PCF8563 I2C - real time clock + buzzer + battery for Raspberry Pi 3
A PCF8563 real time clock module whose supply voltage is maintained by a CR2032 round battery (included). The chip allows timekeeping while the Raspberry Pi is disconnected...
Index: MSX-06077
Index: MSX-06077
IR Hat + remote control - Raspberry Pi overlay
Shield which makes it possible to remotely switch on / off the minicomputer Raspberry Pi. The kit also includes a remote control.
Index: MOD-09868
Index: MOD-09868
- On sale!
- Promotion
Mini Black HAT Hack3r seperator - Raspberry Pi extension - already mounted
Mini Black HAT Kack3r is a shield for the Raspberry Pi, it is mounted to the connectors GPIO of the minicomputer from the ribbon 40-pin. The device is used for separating the...
Index: PIM-10629
Index: PIM-10629
- Reduced price
- Promotion
HiFiBerry DAC+ DSP - sound card for Raspberry Pi 4B/3B+/3/2/B+/A+
Shield, type Hat for Raspberry, version 4B, 3B+, 3B, 2B, A+, B, Zero with 4-channel amplifier Beocreate and the digital signal DSP processor. It is used in the device of the...
Index: RHF-13084
Index: RHF-13084
Expansion Kit - extension Raspberry Pi to breadboard + tape + breadboard - Iduino RA028
A module that allows the GPIO Raspberry Pi pins to be led out onto the contact plate using IDC tape. The kit also includes a contact plate and 40-pin tape.
Index: OST-14267
Index: OST-14267
- Reduced price
- Promotion
Enviro pHAT - temperature, pressure, light intensity and proximity sensor - overlay for Raspberry Pi
Enviro pHAT is an overlay for Raspberry Pi with BME280 and LTR-559 sensors allowing to measure temperature, pressure, light level and proximity sensor. Additionally, the...
Index: PIM-16966
Index: PIM-16966
Unicorn HAT Mini - LED RGB matrix - for Raspberry Pi - Pimoroni PIM498
Overlay for Raspberry Pi made by Pimoroni company. On the board there are 119 RGB LEDs in the form of 17 x 7 matrix . Thanks to the HT16D35A chip it is possible to...
Index: PIM-19068
Index: PIM-19068
GPIO I2C pin expander and LED driver - AW9523 - STEMMA AT / Qwiic - Adafruit 4886
GPIO pinout expander and LED driver . Equipped with AW9523 chip, provides up to 16 additional GPIO inputs / outputs . Uses I2C bus to communicate with connected...
Index: ADA-19252
Index: ADA-19252
NeoKey - key matrix for switches - 76.5 x 21.5 x 4.6 mm board manufactured by Adafruit. It has space for four buttons , including the Kailh socket. Thanks to them, you can...
Index: ADA-19789
Index: ADA-19789
IO pin expander - extension cap for Raspberry Pi 3 / 4 / 400
An expansion overlay for the Raspberry Pi in the form of an IO pin expander . It is compatible with Raspberry Pi version 3 / 4 and 400. On the board all the leads are...
Index: DFR-20073
Index: DFR-20073
Raspberry Pi Build HAT - LEGO motors and sensors driver - RP2040
A LEGO motor and sensor controller made by the Raspberry Pi Foundation. Based on the Raspberry Pi RP2040 microcontroller, this controller for four LEGO motors allows you to...
Index: RPI-20291
Index: RPI-20291
SparkFun Qwiic SHIM for Raspberry Pi - SparkFun DEV-15794
SparkFun Qwiic SHIM is a small module applied to the GPIO pins of Raspbery, with which you can easily equip a minicomputer with a Qwiic connector. The module is plugged...
Index: SPF-21163
Index: SPF-21163
Inventor HAT Mini for Raspberry Pi - PiMoroni PIM672
Inventor HAT Mini is perfect for creating robots, props, moving sculptures and other dynamic Raspberry Pi- based projects. The overlay allows you to connect two motors, four...
Index: PIM-23498
Index: PIM-23498
PCIe to M.2 adapter for Raspberry Pi 5 - Waveshare 26583
A dedicated adapter enabling the connection of NVMe M.2 drives to the Raspberry Pi 5 minicomputer, increasing its performance. The adapter is compatible with drives of...
Index: WSR-24483
Index: WSR-24483
Logic level converter I2C PCA9306 - SparkFun BOB-15439
The module allows bidirectional communication between circuits using different voltage levels for I2C and SMBus. PCA9306 converts voltages from lower range from 1.2 V to 3.3 V...
Index: SPF-01709
Index: SPF-01709
TXB0108 - two-way, 8-channel logic converter - Adafruit 395
The module is based on a TXB0108 system, it allows you to exchange data between systems that use the most popular voltage levels: 3.3 V and 5V. It has eight channels, it...
Index: ADA-02468
Index: ADA-02468
Ultimate GPS Hat + RTC for Raspberry Pi A+/B+/2/3/4 - Adafruit 2324
Do you want to know where your Raspberry Pi is at any time of the day or night? This shield allows you to read the actual time and position with a frequency of 10 Hz using a...
Index: ADA-03284
Index: ADA-03284
HiFiBerry DAC Case + Zero i Raspberry Pi Zero - black
Black case for Raspberry Pi Zero and Zero W minicomputer and HiFiBerry DAC+ Zero overlay with external dimensions 80 x 40 x 40 mm.
Index: RHF-11100
Index: RHF-11100
