SENSORS - Strona 9
Limit switch with lever - WK611 - 5pcs.
Limit switch with lever with the length of 25 mm. Maximum operating parameters: voltage of 250 V and current of 5 A.Liquid flow sensor FS300A 60l/min - thread 3/4''
A liquid flow sensor operating in the range of 1 to 60 liters per minute. It is powered by a voltage of 3.5 V to 24 V, and the output signal is a frequency proportional to the...Color sensor, light transducer - frequency TCS3200D - module Iduino ME069
Module with color sensor enables a measurement of the RGB components, the output is the frequency which depends on the intensity of light of the selected color. It i s...BleBox tempSensorAC v2 - WiFi temperature sensor, 230VAC - up to 4 temperature probes
Sensor for temperature measurement from -55°C to 125°C , allows to connect up to 4 temperature probes. Module communicates using wireless WiFi communication based on μWiFi...Water level sensor - 10W float reed switch - 92mm
The sensor allows you to control the water level in the tank. It consists of a float which under the influence of increasing the fluid volume, rises, causing a short circuit of...Laser distance sensor Lidar TFMini Plus UART / I2C - 12m
Precise, laser distance sensor operating in the range from 0.1 to 12 m with an accuracy of 0,05 m. The supply voltage is 5 V. The device communicates using the UART and I2C...Reed switch normally - plastic 14,5mm
Reed contact in plastic straight housing, 14.5 mm long.Liquid flow sensor YF-S402 6l / min - M11x1,25mm thread
Sensor of liquid flow operating in the range from 0.3 to 6 liters per minute. Is supplied with the voltage from 3,5 V to 24 V, the output signal is a frequency proportional to...DFRobot Gravity: Analog AC Current Sensor SCT 013-020 - to 20A
The sensor measures the intensity of the current flowing in a pipeline without its opening. Measurement occurs through the insulation on a single wire, and the output is the...Waterproof probe with temperature sensor DS18B20 - 2m - brown - silicone
Waterproof probe is equipped with a digital thermometer DS18B20 with cable with the length of 2 meters. Version with silicone wire is characterized by the greater strength.Tilt/shock sensor - Waveshare 9536
The tilt sensor detects changes in position. It can work as a shock sensor. It works with voltages from 3 V to 5.5 V.Pressure sensor cell 50kg - 4pcs.
Pressure sensor reduces its resistance when the force put to the square tip, increases. The sensor is in the form of a rectangle with sides of 33 mm. The set has 4 pieces,...Ultrasonic distance sensor HC-SR04 2-400cm - SparkFun SLEEP-15569
Ultrasonic sensor with an operating range from 20 mm to 4000 mm , with a tolerance of 3 mm. The module consists of a transmitter, a receiver and a control circuit and is...Thermometer with LCD display from -50 °C to 100 °C - white
Digital thermometer for mounting on a panel, the LCD display. It works in the range from -50 °C to 100 °C. The probe is on a wire with a length of 1 m. The device is powered by...Waterproof probe with LM35DZ - 1m analog temperature sensor
Waterproof probe is equipped with an analog thermometer DS18B20 with a cable with the length of 1 meter.Soil moisture sensor with 12V relay - HC-13
The sensor to determine the moisture level of the soil. When it exceeds the level set by the potentiometer, the LED lights up and switched are the contacts oc the relay. The...DFRobot Gravity - vibration sensor
A simple vibration sensor with digital output. It is supplied with the voltage from 3.3 V to 5 V, it works with Arduino modules.MAX31856 Breakout - Universal Thermocouple Amplifier - Adafruit 3263
Module with thermocouple amplifier MAX31856 communicating via the 4-pin SPI interface. Works with thermocouples of type K, J, N, R, S, T, E and B. Works with a supply voltage...Distance sensor, reflective 3,3V/5V - Iduino ST1140
The module is equipped with IR reflective sensor equipped with digital output. It works with a supply voltage from 3.3 V to 5 V. It is applied in the robots tracking the line.Inductive proximity sensor LJ18A3-8-Z / BY 8mm 6-36V
Inductive, digital proximity sensor with a cable with the length of 100 cm and nuts to facilitate mounting. It detects metal at a distance of up to 8 mm. The object detection...Sonoff SNZB-06P - intelligent human presence detector - ZigBee - Android/iOS application
Sonoff SNZB-06P is an advanced human presence sensor that uses 5.8 GHz microwave technology to detect movement and constant presence in the room. By integrating with the...Tensometric beam NA27 1kg (10N)
Strain-gauge beam operating in the range of up to 1 kg (approx. 10 N). The smallest version is used, for example, in kitchen scales, portable scales. The connecting cable has...
