Product description: Filament Devil Design PETG 1.75 mm 1 kg - light green
A pillar of the Devil Design brand, inlight green.The spool contains1 kg netoffilament.It can beused in all3D printersusing the FFF method, not protected against the use of filaments from external suppliers andopen sourcedesigns.PETGis abeginner-friendlymaterialand isavailable in many colours.
In our offer of filaments you will also find other materials and colors.
Filament Devil Design PET-G 1.75 mm 1 kg - Bright green transparent.
Features of the PETG filament
- High durability
- Flexible
- Odourless
- Hydrophobic
- Scratch resistance
Specification of Devil Design PETG filament
| Parameter | Scope |
|---|---|
| Diameter of pillar | 1.75 mm |
| Dimensional tolerances of the philanthropy | +/- 0.05 mm |
| Roughness of the philanthropy | +/- 0,02 mm |
| Material surface | High gloss |
| Material contraction | Very low |
| Weight of empty spool | About 250 g |
| Reel diameter | 200 mm |
| Reel width | About 70 mm |
| Mounting hole diameter | 52 mm |
| The colour of the pillar | Bright green |
| Type of philanthropy | PET-G |
| Vacuum packing | Yes |
| Product weight | 1 kg net |
| Due to design differences between printers, the above data should be treated as a guide and the corresponding values should be determined experimentally. |
Filaments are hygroscopic, meaning they absorb moisture. Therefore, breaking the airtight vacuum packaging permanently reduces the quality and value of the product. For this reason, if an unpacked item is returned, the refund amount will be proportionally reduced. This does not apply to returns resulting from manufacturing defects in the material, such as damaged or cut filament. Please carefully check the color and material type on the label before opening the foil packaging.
Useful links |
