Description: Devil Design PETG 1,75 mm 2 kg film - White.
PETGfilament from Devil Design inwhitecolour. Material is compatible with3D printers, which do not have protection against the use of inserts from other manufacturers. It can also be used withopen sourcedevices. Filament made ofthermoplastic polymerrequires the use ofheated tableandprint cooling. The subject of sale is the felt with a diameter of1.75 mmand a net weight of2 kg.
In our offer of filaments you will also find other materials and colors.
Devil Design PETG 1,75 mm 2 kg White.
PETG feltadvantages
- Odorless and non-toxicity during printing
- High flexibility
- Full waterproofness
- Low shrinkage of material
- Glossy surface
- Resistant to abrasion and mechanical damage
Suggested parameters for printing with felt
| Printing temperature | From 220°C to 250°C |
| Table temperature | 70°C to 80°C |
| Print cooling | Recommended |
|
Due to differences in construction of printers, the above data should be treated as guidelines, and the appropriate values should be determined experimentally. |
Technical specification and physical properties of Devil Design felt
| Parameter | Range |
|---|---|
| Filament diameter | 1,75 mm |
| Dimensional tolerance of the felt | +/- 0.05 mm |
| Colour | White |
| Printing temperature | From 220°C to 250°C |
| Table temperature | From 70°C to 80°C |
| Material | PETG |
| Spool diameter | 310 mm |
| Spool width | 100 mm |
| Mounting hole diameter | 50 mm |
| Packaging | Carton |
| Moisture absorber | Yes |
| Vacuum packaging | No |
| Roundness | +/- 0,02 mm |
| Packaging dimensions | 310 x 310 x 110 mm |
| Net weight | 2 kg |
