Filament Devil Design PETG 1,75mm 1kg - Light Green

Index: DEV-18014 EAN: 5902280031758

PETG filament from Devil Design in the form of a1.75 mm diameter fibre , wound on a 1 kg net spool in Light Green colour. The diameter of the mounting hole is 52 mm. Product can be used with 3D printers, which work in FFF / FDM technology without built-in protection against the possibility of using a filament from an external supplier. The product is vacuum packed together with a moisture absorber.

Filament Devil Design PETG 1,75mm 1kg - Light Green
€22.50
€18.29 tax excl.
Available
Shipping in 24 hours
PayPal payment
Manufacturer: Devil Design

Description: Filament Devil Design PETG 1.75 mm 1 kg - Light Green

PETG filamentfrom Devil Design in the form of a1.75 mmdiameter fibre, wound on a1 kgnet spool inLight Greencolour. The diameter of the mounting hole is 52 mm. The presented product can be used with3D printers, which work in FFF / FDM technology without built-in protection against the possibility of using a filament from an external supplier. The product is vacuum packed together with a moisture absorber.

Filaments

In our offer of filaments you will also find other materials and colors.

Filament Devil Design PETG 1,75mm 1kg - Light Green

Filament Devil Design PETG 1.75 mm 1 kg - Light Green.

Advantages of the Devil Design PETG pillar

Due to its trouble-free use, PETG filament can be used by novice users of 3D printers. The product requires a heated table. Moreover, the manufacturer recommends cooling the printout. PETG filament is characterized byflexibility, highstrengthand increased resistance to scratches, so it is used for the production of handles. The surface of PETG filament is characterized by high gloss. The temperature of the head and table should be determined experimentally, while making test prints. The material is odourless, thus ensuring high comfort of work.

Suggested print parameters of the filament

Printing temperature From 220°C to 250°C
Table temperature From 70°C to 80°C
Cooling the printout Recommended

Due to design differences between printers, the data above should be treated as a general guide and the corresponding values should be determined experimentally.

Technical specifications and physical properties of the Devil Design filament

Parameter Scope
Diameter 1.75 mm
Dimensional tolerances of the philanthropy +/- 0.05 mm
Colour Green
Printing temperature From 220°C to 250°C
Table temperature From 70°C to 80°C
Spool - material PETG
Reel diameter 200 mm
Reel width 70 mm
Mounting hole diameter 52 mm
Package Printed carton
Moisture absorber Yes
Vacuum packing Yes
Roundness +/- 0,02 mm
Packaging dimensions 205 x 205 x 80 mm
Net weight 1 kg

Colour green
Mass 1000 g
Filament - material PETG
Filament - diameter 1.75 mm
Package width 20 cm
Package height 8 cm
Package depth 21 cm
Package weight 1.4 kg

Be the first to ask a question about this product!

Customers who bought this product also bought:

Products from the same category: