• Reduced price

Filament Devil Design PETG 1,75mm 1kg - Dark Orange

Index: DEV-16063 EAN: 5902280032069

PETG filament dark orange, vacuum-packed and protected by a moisture absorber. Fully compatible with printers that are not equipped with locks preventing the use of cartridges from external suppliers. Moreover, it can also be used in open source devices. The thickness of the cartridge is 1.75 mm and the net weight is 1 kg.

Filament Devil Design PETG 1,75mm 1kg - Dark Orange
€22.90 -€2.32
€20.59
€16.74 tax excl.
Lowest price 30 days: €19.31
Available
Shipping in 24 hours
PayPal payment
Devil Design PETG 1,75mm 1kg - Red / Orange / Yellow - shades:
Manufacturer: Devil Design

Description: Filament Devil Design PETG 1.75 mm 1 kg - Dark Orange

PETGfilamentis dark orange,vacuum packed and additionally protected with a moisture absorber. The product is fully compatible with3D printerswhich are not equipped with locks preventing the use of cartridges from external suppliers. Moreover, it can also be used in open source devices. The described PET-G filament is distinguished by its high quality, which makes it extremely efficient and easy to use. The thickness of the pillar is1.75 mmand the net weight is1 kg.

Filaments

In our offer of filaments you will also find other materials and colors.

Properties of PETG filaments

The thermoplastic polymer is characterized by high strength, scratch resistance and flexibility, thanks to which it is used, among others, for printing solid handles. In addition, PETG isodourless, which ensures comfortable work. What is more, very low material shrinkage guarantees successful prints even without much experience.PET-Grequires moderate print cooling.

Filament Devil Design PET-G 1,75mm 1kg - Dark Orange

Filament Devil Design PET-G 1.75 mm 1 kg - dark orange.

Suggested print parameters of the filament

Printing temperature From 220°C to 250°C
Table temperature From 70°C to 80°C
Cooling the printout Recommended

Due to design differences between printers, the above data should be treated as a guide and the corresponding values should be determined experimentally.

Technical specifications and physical properties of the Devil Design pillar

Parameter Scope
Diameter of pillar 1.75 mm
Dimensional tolerances of the philanthropy +/- 0.05 mm
Colour Dark Orange
Printing temperature From 220°C to 250°C
Table temperature From 70°C to 80°C
Material PET-G
Reel diameter 200 mm
Reel width 70 mm
Mounting hole diameter 52 mm
Package Printed carton
Moisture absorber Yes
Vacuum packing Yes
Roundness +/- 0,02 mm
Packaging dimensions 205 x 205 x 80 mm
Net weight 1 kg

[ID]
Mass 1000 g
Filament - material PETG
Filament - diameter 1.75 mm
Filament - Spool Standard
Package width 20.3 cm
Package height 20.8 cm
Package depth 7.9 cm
Package weight 1.233 kg

Be the first to ask a question about this product!

Customers who bought this product also bought:

Products from the same category: