Product description: Filament Devil Design PETG 1.75 mm 1 kg
Agreyfilament, rolled up in a spool, its diameter is1.75 mm. It is made of PETG material, a thermoplastic polymer from a group of polyesters in fibre form. Designed for FFF3Dprinters. Net weight is 1 kg.
In our offer of filaments you will also find other materials and colors.
Filament Devil Design PET-G 1.75 mm 1 kg - PC Gray.
Features of the PETG filament
- Flexible
- Odourless
- Hydrophobic
- High durability
- High transparency
- Scratch resistance
Suggested print parameters for filament
| Head temperature | From 220°C to 250°C |
| Table temperature | From 70°C to 80°C |
| Cooling the printout | Optional |
Specification of Devil Design PETG filament
| Parameter | Scope |
|---|---|
| Diameter of pillar | 1.75 mm |
| Dimensional tolerances of the philanthropy | +/- 0,05 mm |
| Roughness of the philanthropy | +/- 0,02 mm |
| Material surface | High gloss |
| Material contraction | Very low |
| Weight of empty spool | About 250 g |
| Reel diameter | 200 mm |
| Reel width | About 70 mm |
| Mounting hole diameter | 52 mm |
| The colour of the pillar | Grey |
| Type of philanthropy | PET-G |
| Vacuum packing | Yes |
| Product weight | 1 kg net |
| Due to design differences between printers, the above data should be treated as a guide and the corresponding values should be determined experimentally. |
Filaments are hygroscopic, meaning they absorb moisture. Therefore, breaking the airtight vacuum packaging permanently reduces the quality and value of the product. For this reason, if an unpacked item is returned, the refund amount will be proportionally reduced. This does not apply to returns resulting from manufacturing defects in the material, such as damaged or cut filament. Please carefully check the color and material type on the label before opening the foil packaging.
Useful links |
