Filter by
Price
0 947
more (-5) ok clear
Manufacturers
more (532) ok clear
Nozzle temperature
more (-5) ok clear
Filament diameter
Filter

Promotion products

Recomendations

Accessories for 3D printers

Products: 323
Loading...

Universal hexagonal cross wrench for 3D printer nozzle

A compact crosswrench with four hexagonal bits. Can be used for screwing nozzles in 3D printers. Four different sizes of caps, each placed on one arm of the wrench, allow...
4.7 (11)
Index: DNG-17407
Index: DNG-17407
Shipping in 24 hours
Available
Regular price €1.00 Price €1.00

Brass thread - 3D printing insert - various sizes - set of 50 pieces

A set of 50 brass threads in various sizes for embedding in ready-made 3D models. This solution allows e.g. easy to combine individual printouts . The threads have been...
4.5 (2)
Index: JUS-22039
Index: JUS-22039
Shipping in 24 hours
Available
Regular price €2.90 Price €2.90

Stepper motor driver A4988 RepRap - red

Stepper motor controller based on A4988. Powered from 8 - 35 V, with a maximum current consumption of 1 A per coil. Maximum resolution: 1/16 steps.
5.0 (6)
Index: MOD-02660
Index: MOD-02660
Shipping in 24 hours
Available
Regular price €4.50 Price €4.50

Brass thread - 3D printing insert - various sizes - set of 500 pieces - justPi

A set of 500 brass threads in various sizes intended for embedding in ready-made 3D models. This solution allows e.g. easy to combine individual printouts . The threads have...
4.9 (12)
Index: JUS-22040
Index: JUS-22040
Shipping in 24 hours
Available
Regular price €13.90 Price €13.90

Blower Fan Creality 24V 40x40x10mm for Ender 3

Original Creality fan designed for Ender series 3D Printers, mounted on the printer head. Fan with input voltage 24 V and dimensions of 40 x 40 x 10 mm. It has two...
5.0 (12)
Index: CRL-15768
Index: CRL-15768
Shipping in 24 hours
Available
Regular price €3.90 Price €3.90

Knife for processing 3D prints

A knife used to process finished models made with a 3D printer. It has a profiled interchangeable blade , which allows it to reach even hard to reach printout details. The...
4.8 (9)
Index: DNG-17409
Index: DNG-17409
Shipping in 24 hours
Available
Regular price €3.50 Price €3.50

3D printer Creality Sermoon V1 Pro XY-axis limit switch kit

XY axis limit switch, protecting against exceeding the maximum travel range. Used in Sermoon V1, Sermoon V1 Pro and Sermoon V2 3D printers. The sensor is mounted on a PCB ,...
5.0 (1)
Index: CRL-21517
Index: CRL-21517
Shipping in 24 hours
Available
Regular price €1.50 Price €0.98
  • Reduced price
  • Promotion

Resin filter

The filter is designed to clean the resin from contaminants that may adversely affect the quality of printouts. It is mainly used to remove particles of the cured printing...
4.8 (5)
Index: DNG-17691
Index: DNG-17691
Shipping in 24 hours
Available
Regular price €0.90 Price €0.90

Axial Cooling Fan 24V 40x40x10mm for Creality Ender-3 V2 3D printer Ender-3, Ender-3 Pro, Ender-5 V2

Original axial fan from Creality, a well-known manufacturer of 3D printers. The product has dimensions of 40 x 40 x 10 mm. Works with a voltage of 24 V. The fan dissipates...
4.9 (10)
Index: CRL-19969
Index: CRL-19969
Shipping in 24 hours
Available
Regular price €3.90 Price €3.90

Hotend for Snapmaker 2.0

Original spare part designed to work with 3D printing module, which is equipped with Snapmaker version 2.0. It is a fully integrated kit ready to connect right out of the box....
4.8 (6)
Index: SNM-19179
Index: SNM-19179
Shipping in 24 hours
Available
Regular price €12.00 Price €12.00

Limit switch - endstop - for 3D printers - Creality

A  limit switch (Endstop) is a component used in 3D printers to stop moving parts of the system - such as carriage or table movements. It also detects when the X, Y or Z axes...
5.0 (9)
Index: CRL-19684
Index: CRL-19684
Shipping in 24 hours
Available
Regular price €1.50 Price €1.50

Printer nozzle 0,8mm - filament 1,75mm - brass

Volcano is a variety of nozzles used in 3D printers, adapted to devices with high operating speeds. The specific shape of the nozzle allows to obtain a longer melting distance...
Index: AMS-20128
Index: AMS-20128
Shipping in 24 hours
Available
Regular price €1.50 Price €1.50

Nozzle 0.4 mm MK8 - filament 1.75mm - copper

Nozzle 0.4 mm is suitable for most of the existing heads. Filament is 1.75 mm. External M6.
4.9 (18)
Index: KAB-08886
Index: KAB-08886
Shipping in 24 hours
Available
Regular price €0.90 Price €0.90

Brass thread - 3D printing insert - various sizes - set of 100 pieces

A set of 100 brass threads in various sizes for embedding in ready-made 3D models. This solution allows e.g. easy to combine individual printouts . The threads have been...
5.0 (2)
Index: JUS-22015
Index: JUS-22015
Shipping in 24 hours
Available
Regular price €4.90 Price €4.90

Dimafix printing adhesive - spray 400ml

A product that improves the adhesion of 3D prints to the glass surface of the printing table. Designed for FFF/FDM printers. Dimafix significantly facilitates work with...
4.9 (53)
Index: DIM-17938
Index: DIM-17938
Shipping in 24 hours
Available
Regular price €14.50 Price €14.50

Printer nozzle 0,2mm MK8 - filament 1,75mm - copper

Nozzle with a hole of 0.2 mm is suitable for most available printheads in printers 3D. Supports filaments with a diameter of 1.75 mm. It has M6 threads.
4.9 (10)
Index: DNG-13961
Index: DNG-13961
Shipping in 24 hours
Available
Regular price €0.90 Price €0.90

Sunlu FilaDryer S4 - filament dryer

The FilaDryer S4 filament drying system from Sunlu is designed to provide good storage conditions for printing materials. Enables precise control of humidity in the chamber....
5.0 (2)
Index: SLU-24924
Index: SLU-24924
Shipping in 24 hours
Available
Regular price €134.00 Price €134.00

Filament cleaner

A small device for cleaning the filament, used in 3D printers. The cleaner should be placed on the pillar. Located in the plastic housing, the sponge collects dirt from the...
4.8 (29)
Index: DNG-17470
Index: DNG-17470
Shipping in 24 hours
Available
Regular price €1.90 Price €1.90

Creality nozzle 0,4mm - filament 1,75mm - copper

Original Creality nozzle . Intended for use in hotends of a few selected models of 3D printers from the Ender-3 and CR series (the full list below). The product is made of...
5.0 (9)
Index: CRL-21522
Index: CRL-21522
Shipping in 24 hours
Available
Regular price €1.90 Price €1.90

Printer Nozzle 0,6mm MK8 - filament 1,75mm - copper

Nozzle with a hole of 0.6 mm is suitable for most available printheads in printers 3D. Supports filaments with a diameter of 1.75 mm.  It has  MK8 threads.
5.0 (5)
Index: DNG-13964
Index: DNG-13964
Shipping in 24 hours
Available
Regular price €0.90 Price €0.90

Printer nozzle 0,3mm MK8 - filament 1,75mm - copper

Nozzle with a hole of 0.3 mm is suitable for most available printheads in printers 3D. Supports filaments with a diameter of 1.75 mm.  It has M6  threads.
Index: DNG-14127
Index: DNG-14127
Shipping in 24 hours
Available
Regular price €0.90 Price €0.90

StepStick DRV8825 Stepper Motor Driver

Stepper motor's driver based on the system DRV8825, allows you to control the motor with a current consumption of up to 1.5 A (with cooling of up to 2.2 A) per coil, at...
5.0 (2)
Index: MOD-03739
Index: MOD-03739
Shipping in 24 hours
Available
Regular price €4.90 Price €4.90

Nozzle 0,4 - filament 1,75mm - brass

Original nozzle from Creality. It is compatible with the hotends found in Creality's Ender-3, Ender-5, CR-6 series 3D printers and can also be used in: Ender-6, CR-10, CR-10...
4.6 (6)
Index: CRL-20503
Index: CRL-20503
Shipping in 24 hours
Available
Regular price €1.50 Price €1.50

3D printer Creality Sermoon V1 Pro Z-axis limit switch kit

Z axis limit switch used in Sermoon V1 and Sermoon V1 Pro 3D printers. The sensor is mounted on a PCB , on which there is also a soldered connector and two mounting holes...
Index: CRL-21518
Index: CRL-21518
Shipping in 24 hours
Available
Regular price €2.90 Price €1.16
  • Reduced price
  • Promotion

3D printer accessories – what to pay attention to when buying?

When selecting printer parts, as with all other devices, compatibility is the primary consideration. For example, a nozzle dedicated to one type of printer will have different dimensions from others, despite its confusingly similar appearance. Similar rules also apply to other printer parts, especially those cooperating with such a critical assembly as the print head. That's why in this category we also provide original thermistors, heaters and PTFE tubes used in the hotends of Prusa MK3 printers. Our offer also includes printer accessories that constitute the basis for the printed detail - such as a heating plate for the Dobot Mooz 2 3D printer or a round BuildTak overlay for the Vertex Delta K8800 printer.

Transform your robot into a 3D printer...

Yes, it's possible - as long as you have the right accessories. Thanks to the 3D Printer Kit, you will transform the uArm Swift Pro robot into a functional and original 3D printer. The print head works with a Bowden extruder, also included in the set. The 35 W module is designed to work with PLA filaments with a diameter of 1.75 mm and enables 3D printing at a speed of up to 20 mm/s. Thanks to the working field size of 1000 x 100 x 100 mm, you can complete even large projects while maintaining an accuracy of 0.2 mm. For DIY projects, an excellent solution that enables laser engraving with a power of up to 6 W is the high-class PLH3D laser module with a precise lens that focuses the laser beam to increase the efficiency of engraving.

…or CNC engraver!

This is also possible if you use the Dobot Mooz platform. The manufacturer made the correct assumption that one, solid mechanical structure, based on industrial-class linear drives, is able to work as both a 3D printer, a CNC engraver and a laser engraver. Our offer includes appropriate accessories for Dobot Mooz 3D printers, including a laser module with a power of up to 500 mW, enabling laser engraving in wood, paper products, leather and some plastics. We also have a CNC module that allows carving in wood, plastics, PCB and other non-metallic materials at a speed of up to 1200 rpm. The set includes a black plate that stabilizes the workpiece using two adjustable guides.

3D printer accessories - FAQ

3D printers are used, among others, to print three-dimensional models, prototypes, replacement parts for devices, toys and figurines.

You can print from, among others , PLA (polylactide) , ABS, nylon, rubber-like materials (TPU), metal, plaster, ceramics or light-cured resins , as well as many other materials.

The design of a 3D printer depends on the technology used by the device. You can learn more about the construction of the most popular filament printers in the article " 3D printer - what parts is it made of? ".