- On sale!
- Promotion
Cytron SmartDriveDuo MDDS10 - two-channel 35V / 10A motor controller
Index: CTN-12406
- Reduced price
- Promotion
- Reduced price
- Promotion
- Reduced price
- Promotion
Fibaro Door/Window Sensor 2 - Z-Wave Plus - black - FGDW-002-3 ZW5
Index: FIB-23768
- Reduced price
- Promotion
List of products by brand Odroid - Strona 5
Loading...
8GB eMMC memory module with Linux for Odroid C2
The eMMC v5.0 memory module with Linux Ubuntu 16.04 for minicomputer Odroid C2. Equipped with interface JEDEC/MMCA 5.0, HS400 with 8-bit DDR mode.
Index: ODR-06542
Index: ODR-06542
- EOL
32GB eMMC memory module with Linux for Odroid XU4
The memory module eMMC v5.0 for Linux Ubuntu 15.04 for minicomputer Odroid XU4. Interface JEDEC/MMCA 5.0, HS400 DDR mode with 8-bit
Index: ODR-07459
Index: ODR-07459
- EOL
8GB eMMC memory module with Android for Odroid C2
The memory module eMMC v5.0 for Android-5.x or later for minicomputer Odroid C2. Interface JEDEC/MMCA 5.0, HS400 DDR mode with 8-bit
Index: ODR-07532
Index: ODR-07532
- EOL
Case for Odroid H2 with hard drive installation - type 4
Enclosure for Odroid H2 minicomputer with the possibility of installing a hard drive. Provides access to all Odroid connectors. It also has two holes for mounting optional 92...
Index: ODR-15151
Index: ODR-15151
- EOL
MCP23017 16 port I2C GPIO board for Odroid H2
16-pin GPIO output expander for I2C interface based on MCP23017 chip , which supports 100 KHz, 400 KHz and 1.7 MHz. The expander can be connected to a total of 8 modular sets...
Index: ODR-15153
Index: ODR-15153
- EOL
LCD display 4x20 characters blue + I2C converter for Odroid H2
The Odroid H2 minicomputer's 4 x 20 LCD display uses an I2C interface for communication, so it only uses 4 pins to connect.
Index: ODR-15155
Index: ODR-15155
- EOL
Case for Odroid H2 with hard drive installation - type 3
Enclosure for Odroid H2 minicomputer with the possibility of installing two 2.5'' HDDs or SSDs (total maximum height 15 mm). The design of the enclosure allows free access to...
Index: ODR-15341
Index: ODR-15341
- EOL
Case for Odroid C1+/C2 - transparent
Transparent case for minicomputer Odroid in a version C1/C1+ and C2 with external dimensions 90 x 60 x 30 mm. It ensures access to all connectors and provides adequate cooling.
Index: ODR-06322
Index: ODR-06322
- EOL
USB 3.0 - SATA HDD/SSD module - for Odroid
Module enables the connection of a hard drive 2.5" SATA HDD/SDD via SATA bus using a USB connector on the minicomputer Odroid.
Index: ODR-06333
Index: ODR-06333
- EOL
Set of connectors for Odroid C0
Set of elements for the boards from the Odroid C0 series, which do not have soldered connectors. In the set there are, among others, USB Jack, IR sensor and goldpin strip.
Index: ODR-06347
Index: ODR-06347
- EOL
Touch screen - capacitive LCD 7'' 1024x600px HDMI + microUSB for Odroid
Capacitive 7" touch screen for minicomputers from Odroid series with a resolution of 1024 x 600 px. Works with the Odroid C1+, C2, XU4 through the HDMI and microUSB cable.
Index: ODR-06349
Index: ODR-06349
- EOL
Case for Odroid C2 - transparent
Transparent case for Odroid C2 minicomputer with external dimensions 100 x 71 x 32 mm. Gives access to the power jack and multimedia connectors.
Index: ODR-06527
Index: ODR-06527
- EOL
USB Converter - Audio Jack - sound card for Odroid
Cable for minicomputer from Odroid series, which allows for the output of audio signal through the USB connector. It has a 3.5 mm output for connecting speakers or headphones...
Index: ODR-06537
Index: ODR-06537
- EOL
DC power cord 2,5x0,8mm for Odroid
Cable with free wires with removed insulation, completed with a plug connector DC Jack 2.5 x 0.8 mm for Odroid minicomputer series.
Index: ODR-06536
Index: ODR-06536
- EOL
Case for Odroid C2 - VESA for monitor mounting - black and transparent
Black and transparent case for the Odroid C2 minicomputer with external dimensions of 109 x 109 x 33 mm. It gives access to the power connector and the multimedia connector....
Index: ODR-06528
Index: ODR-06528
- EOL
DC power cord 2.5x0.7mm with bend protector for Odroid
Cable with free wires with removed insulation, completed with a plug connector DC Jack 2.5 x 0.7 mm for Odroid minicomputer series. Cable length is approx. 90 cm
Index: KAB-07037
Index: KAB-07037
- EOL
DC power cord 2.5/0.7mm with ferrite filter - for Odroid
1.5m long cable with free wires with removed insulation, completed with a plug connector DC Jack 2.5 x 0.7 mm for Odroid minicomputer series.
Index: KAB-07172
Index: KAB-07172
- EOL
64GB eMMC memory module with Linux for Odroid XU4
The memory module eMMC v0.5 for Linux Ubuntu 15.04 for minicomputer Odroid XU4. Interface JEDEC/MMCA 5.0, HS400 DDR mode with 8-bit.
Index: ODR-07460
Index: ODR-07460
- EOL
Odroid MC1 - computer cluster Exynos5422 32-Core 2GHz + 8GB RAM
The computer cluster Odroid My Cluster One in the version with four powerful CPU Exynos5422 octa-core 32-bit Cortex-A15 2 GHz. The module has 4x 2 GB RAM memory, four...
Index: ODR-10651
Index: ODR-10651
- EOL
CloudShell 2 Case 2 for Odroid XU4 - set of elements for building NAS file server - blue
Set of elements for self-assembly of the NAS file server on the basis of the Odroid XU4. Included is a blue case for the minicomputer, which also holds two 3.5" hard drive HDD...
Index: ODR-10790
Index: ODR-10790
- EOL
Odroid MC1 Solo - Exynos5422 8-Core 2GHz + 2GB RAM
Single module that is a part of MC1 Odroid - cluster. It is equipped with a powerful CPU Exynos5422 octa-core 32-bit Cortex-A15 2 GHz. The module has 2 GB of RAM, built-in...
Index: ODR-11902
Index: ODR-11902
- EOL
Odroid XU4Q - Samsung Exynos5422 Octa-Core 2,0GHz / 1,4GHz + 2GB RAM with passive cooling
Minicomputer Odroid in version Xu4Q with a powerful processor Samsung Exynos5422 Octa-Core, with cores Cortex-A15 2.0 GHz + Cortex-A7, 1.4 GHz quad and passive cooling in the...
Index: ODR-11903
Index: ODR-11903
- EOL
Keyboard for the console Odroid Go. It can emulate: Game Boy, Game Boy Color, Game Gear, Commodore 64, ZX Spectrum, Nintendo Entertainment System or Sega Master System. Module...
Index: ODR-13248
Index: ODR-13248
- EOL
Odroid - USB 3.0 module for uploading data to eMMC memory
The module facilitates flashing the OS image on the eMMC module. It was equipped with a USB 3.0 interface. Running in HS200 mode. Works with the Odroid eMMC modules from the...
Index: ODR-13291
Index: ODR-13291
- EOL