- EOL
Description
A sensor that detects the concentration of carbon monoxide (CO) in the air. It is powered by 230V AC. It is used for warning about the dangerous to human, gas, with the help of beeps and optical signal. The sensor detects the signaling concentration of CO from 300 ppm. It has a buttonTest / Resetthat allows you to check the correct operation of the device and shutdown of the home alarm.
|
Attention! Before connecting, see the instructions attached to the kit. |
Specification
- Sensor: electrochemical CO sensor by Figaro company
- Power supply: 230 V AC
- Working temperature: from 4°C to 38°C
- Humidity: up to 90 %
- Current consumption: up to 13 mA
- Operation range: approx. 20 to 25 m2
- Degree of protection: IP20
- Alarm: 85dB acoustic alarm and optical alarm
- Buttons: test / reset, of the peak concentrations
- The activation time of the alarm:
- 300 PPM - alarms within 3 minutes
- Dimensions: 110 x 70 x 45 mm
- Weight: 190 g
Finds application in:
-
home boiler rooms with stoves of CO fired with the solid fuels and inflammable gas
- kitchens. bathrooms equipped with gas devices
- local garages for cars with LPG installation
- school physical-chemical laboratories
- public areas
Each sensor CD-41A2 was tested in Polish laboratories for the operation correctness. The following video shows the measurement procedure.
Useful links |
