Soldering station WEP 938D+ remembers settings - two irons 907L
Index: LUT-08058
- Reduced price
- Promotion
- On sale!
- Promotion
Monostable ON-OFF switch - PBW-16BPD - 2A 250V - flat red point
Index: AKS-10816
- Reduced price
- Promotion
- Reduced price
- Promotion
List of products by brand Waveshare - Strona 2
Loading...
WM8960 - audio player I2S I2C - Waveshare 15019
Energy saving audio module with built-in microphone based on the WM8960 codec. Supports common sample rates, such as 8/11,025/22,05/44,1/48 KHz, etc. and sound effects such as...
Index: WSR-13307
Index: WSR-13307
RGB LED Hat for Raspberry Pi 3/2/Zero - Waveshare 12725
Shield for the Raspberry Pi containing the LED matrix 8 x 4 consisting of WS2812B LEDs. Each LED can be individually set. The device has dimensions of 65 x 30 mm, it works with...
Index: WSR-08869
Index: WSR-08869
E-paper E-Ink flexible display (D) 2,13'' 212x104px HAT for Raspberry Pi - Waveshare 15084
Shield for Raspberry Pi with a flexible display e-paper of 2.13 " with a resolution of 212 x 104 pixels. It is connected directly to GPIO pins. It communicates via SPI...
Index: WSR-13457
Index: WSR-13457
Keyboard - 2x4 tact switch matrix - Waveshare 3678
The matrix consists of 8 buttons, type tact switch, distributed in four rows and two columns. The signals are displayed out on the 9 popular goldpin connectors - pitch of 2.54...
Index: WSR-04499
Index: WSR-04499
Set of 13 modules with cables for Arduino - Waveshare 9467
Set of 13 popular modules compatible with Arduino plates. In the set are i.a.: sensors of flames, color, soil moisture, rotation, sound, liquid level and many others. The...
Index: WSR-04511
Index: WSR-04511
Color sensor, light-frequency converter TCS3200 - Waveshare 9520
Module with color sensor that enables a measurement of the RGB components, the output is the frequency depend on the intensity of the selected color. It is supported by any...
Index: WSR-04932
Index: WSR-04932
Touch screen - resistive LCD 5'' 800x480px - HDMI + USB for Raspberry Pi + case - Waveshare 11018
Waveshare resistive 5" touch display for Raspberry Pi with a resolution of 800 x 480 px. It works with any version of the Raspberry Pi via HDMI and USB cable. The set also...
Index: WSR-08872
Index: WSR-08872
Case for Raspberry Pi LCD HDMI screen TFT 7" - black and white - Waveshare 11301
Black-and-white case for a minicomputer Raspberry Pi with an attached touch screen LCD TFT 7" from Waveshare.
Index: WSR-05843
Index: WSR-05843
E-paper E-Ink 2.9'' 296x128px - SPI display module - Waveshare 12956
Module with 2.9" e-paper display with a resolution of 296 x 128 px. Communicates via the SPI interface, e.g. with Arduino or Raspberry Pi.
Index: WSR-09099
Index: WSR-09099
Waveshare touch screen, 5.5" capacity for Raspberry Pi with 1080 x 1920 px resolution. Display protected by hardened glass. Includes HDMI connection and mrcroUSB cable for...
Index: WSR-14780
Index: WSR-14780
Waveshare capacitive touchscreen 7" display for the Raspberry Pi with a resolution of 800 x 480 px. It works with Raspberry Pi in versions 4B, 3B+, 3B, 2B, B+, Zero, and Zero W...
Index: WSR-05336
Index: WSR-05336
Raspberry Zero V1.3 mini Camera - Waveshare 12039
Module with the camera, compatible with Raspberry Pi Zero v1.3. The device has a matrix CCD 1/4" with the resolution of 5 Mpx, supports mode HD 1080px.
Index: WSR-07601
Index: WSR-07601
USB programmer and debugger for Xilinx devices - Waveshare 6530
A platform that allows you to program and debug Xilinx devices via USB. The device is based on CY7C68013A+FPGA chip, which is compatible with original Xilinx platforms. It...
Index: WSR-16398
Index: WSR-16398
Dust sensor / particle concentration - GP2Y1010AU0F air purity monitor + module - Waveshare 10500
Dust sensor allows you to monitor the purity of the air. It is equipped with the Sharp GP2Y1010AU0F sensor, it allows to detect particles with diameter of more than 0.8 ยตm, for...
Index: WSR-04480
Index: WSR-04480
Sensor / probe to measure soil moisture - analog - Waveshare 9527
The sensor to determine the moisture level of the soil. It is powered with the voltage from 3.1 V to 5 V. The output is the analog voltage which increases its value along with...
Index: WSR-04504
Index: WSR-04504
Waveshare touch display, capacitive 11.6" for the Raspberry Pi with a resolution of 1920 x 1080 px. Works with Raspberry Pi in versions 4B, 3B+ 3B+ 2B, 1B+, 1B, 1A and Zero...
Index: WSR-13467
Index: WSR-13467
Programmer/debugger STM8/STM32 compatible with ST-LINK/V2 mini - Waveshare 10053
The device is used as the programmer and debugger for STM8 and STM32 modules. It works with voltages 3.3 V and 5 V, selectable by jumper.
Index: WSR-04481
Index: WSR-04481
Converter RS232 - UART with connector DB9 - SP3232 3.3V/5V - Waveshare 3965
Converter of serial interface RS232 to standard UART with 9-pin D-SUB connector. Control system is a popular SP3232. The module operates with a supply voltage range from 3.0 V...
Index: WSR-04475
Index: WSR-04475
Touch screen - resistive IPS LCD 10,1'' 1024x600px HDMI + GPIO for Raspberry Pi - Waveshare 11870
Waveshare touch screen resistive with a diagonal of 10.1" and a resolution of 1024 x 600 px. Works with Raspberry Pi in versions 3, 2, B+ Zero via the HDMI connector and the...
Index: WSR-07078
Index: WSR-07078
Temperature and humidity sensor DHT22 (AM2302) module + cables - Waveshare 11092
Module with temperature and humidity sensor with a digital interface, single-wired. Measuring range: temperature from -40 ยฐC to +80 ยฐC, humidity from 0% to 100 % RH.
Index: WSR-04920
Index: WSR-04920
ADS1256/DAC8552 - A/C and C/A converter 24/16-bit SPI - overlay for Raspberry Pi - Waveshare 11010
Module with high precision converter of A/C and C/A in the form of shield for GPIO connectors of Raspberry Pi. It has 2 16-bit analog outputs and 8 24-bit analog inputs. It...
Index: WSR-04478
Index: WSR-04478
Touch screen LCD Rev 2.1 2.8'' 320x240px SPI + microSD reader - shield for Arduino - Waveshare 10684
Shield for Arduino with resistive TFT touch screen with a diagonal of 2.8". The screen has LED backlight and the resolution of 240 x 320 px. It works with 3.3 V and 5 V...
Index: WSR-04464
Index: WSR-04464
Liquid level sensor - analog + wires - Waveshare 9525
The sensor is used for determining the liquid's level in the vessel. It is powered with the voltage from 2.0 V to 5.0 V. The output is an analog voltage which increases its...
Index: WSR-04503
Index: WSR-04503
Converter USB-UART CP2102 - miniUSB port - Waveshare 8085
Converter which provides communication between the serial interfaces USB and UART. It allows to exchange data between the computer and the systems which use microcontrollers....
Index: WSR-04925
Index: WSR-04925
