ELECTRONICS - Strona 4
OLED blue graphic display 1.3’’ 128x64px I2C v2 - blue characters - SH1106
OLED blue display with a diagonal of 1.3" and a resolution of 128 x 64 px. The screen is based on SH1106 driver, works with voltages of 3.3 V and 5 V, and communicates over...Set of 5mm LEDs - justPi - 16pcs.
A set of LEDs in a 5 mm DIP housing. It contains as many as 16 diodes in 4 colours - 5 pieces of red, 5 pieces of green, 5 pieces of yellow and 1 piece of blue diode. The...JustPi THT CF carbon resistor 1/4W 330Ω - 30pcs.
The set consists of 30 resistors. The electronic elements are designed for THT through-hole mounting. The resistance is 330 Ω and the tolerance is 5%.Tact Switch 12x12mm with cap - mushroom blue - 5pcs
Button size 12x12 mm , cap height: 5.7 mm, cap diameter: 12 mm, cap color: blue. Price for 5 pcs .USB cable A - B - Lanberg - 1.8m
USB (type A) - USB (type B) cable is used to connect computer with devices equipped with USB B slots. Its length is 1.8 m.Cytron MD20A - single-channel motor controller 30V/20A
Single-channel DC motor controller based on MOSFET transistors. Enables control of motor speed through PWM channel. Continuous current per channel is 20 A (momentary 60 A)....Set of 5mm LEDs - justPi - 30pcs.
A set of LEDs in a 5mm DIP housing. It contains as many as 30 diodes in 3 colours - 10 pieces in red colour, 10 pieces in green colour and 10 pieces in yellow colour....Tact Switch 12x12mm cap black - 5 pieces
Size: 12 x 12 mm, square nozzle: 10 x 10 mm, color of the nozzle: black. Price is for 5 pieces.LED 3mm yellow - 10pcs. - justPi
Set of 10 pieces of yellow light-emitting diodes (LEDs) with a lens diameter of 3 mm. It emits radiation in the visible light range. It is designed for THT through-hole...BLS connector - 1x12 socket - 5pcs.
Socket for BLS type cable, 2.54 mm pitch. The set includes 5 1x12 sockets.Set of CF THT 1/4W resistors described - 330pcs.
Set of 33 values of through hole resistor of 0,25 W with the tolerance of 5 %, 10 pieces of each. The elements are signed, which facilitates finding the desired value.OTG Host microUSB cable - 15cm USB - original adapter for Raspberry Pi Zero
Adapter to connect devices with USB connector, type A, for minicomputer Raspberry Pi Zero and Zero W.Logic level converter 3,3V / 5V - UART - Iduino ST1167
The module allows to exchange data between systems that use two popular voltages: 3.3 V and 5 V Ensures the connection of the UART interface.justPi JST PH2.00 2/3/4/5 pin (male+female) and female pin for socket housing - 230 pieces
JustPi JST PH2.00 connector set consisting of 10 sets of plugs and sockets with the number of pins: 2 / 3 / 4 / 5, 230 elements in total. All connectors are placed in a...Crocodile cables - 50cm, colorful 10pcs
Set of 10 colorful wires ended, on both sides, with connectors of crocodile type. Length of one element is 50 cm.Cover for temperature sensor DS18B20 / LM35 - 6x50 mm
Thermowell for DS18B20, LM35 and other temperature sensors in TO92 housing .Pololu Step-Up/Step-Down Voltage Regulator S7V7F5 - 5V 1A - soldered connectors
A small module of the pulse inverter, supplied with voltage from 2.7 V to 11.8 V . Output voltage is set to 5 V , maximum output current is 1 A . The module dimensions are:...Shift register 74HC595 - 8-bit 5pcs
The registry after the 8-bit outputs zatrzaskującymi - latch. Price for 5 PCsBLS connector - 3x2 socket - 5 pcs
The socket for the BLS cable, pitch of 2.54 mm. The set includes 5 slots of 3x2.LED RGB Ring WS2812 5050 x 16 diodes - 44mm
The ring consists of 16 individually addressed RGB LEDs 5050 with integrated control unit. Module needs one microcontroller output. Outer circle diameter is 44 mm.Connecting cables justPi female-male 20cm - 40pcs
The set contains 40 pieces of different colored connection wires from justPi. The cables are 20 cm long and have a female connector on one side and a male connector on...