USB Serial Light Adapter - USB-UART converter with miniUSB connector
Index: DFR-05064
- Reduced price
- Promotion
- On sale!
- Promotion
- Reduced price
- Promotion
Minicomputer UP Squared V2 2GB RAM + 32GB eMMC Intel Celeron N6210
Index: AAE-24033
- Reduced price
- Promotion
- On sale!
- Promotion
Motor drivers and servos - Strona 2
Loading...
DRV8874 - single channel 37V/2.1A motor driver - Pololu 4035
Single-channel DC motor driver from Pololu equipped with the DRV8874 system. It is supplied with the voltage from 4.5 V to 37 V. The continuous current per channel is 2.1...
Index: PLL-21359
Index: PLL-21359
DFRobot TB6612 - 4-channel motor driver 13.5V/1.2A - Shield for Arduino
The module allows you to control four DC motors (DC) using boards of the Arduino. The system allows you to adjust the direction and rotation speed of the motors with a current...
Index: DFR-07441
Index: DFR-07441
Cytron MDD10A - dual-channel 30V / 10A motor controller
Two-channel DC motor controller. Continuous current per channel is 10 A (momentary 30 A) . Supply voltage is 5 V to 30 V . The controller works with logical voltage 3.3 V...
Index: CTN-15818
Index: CTN-15818
StepStick DRV8825 Stepper Motor Driver
Stepper motor's driver based on the system DRV8825, allows you to control the motor with a current consumption of up to 1.5 A (with cooling of up to 2.2 A) per coil, at...
Index: MOD-03739
Index: MOD-03739
STSPIN220 Low-Voltage Stepper Motor Driver Carrier - Pololu 2876
Stepper motor driver powered from 1,8 V to 10 V. Maximum resolution: 1/256 koku. Can operate without heat sink or forced air flow at 1.1 A per phase.
Index: PLL-13822
Index: PLL-13822
Pico Motor Driver HAT - 12V/0,6A for Raspberry Pi Pico - SB Components SKU21468
A motor controller in the form of a HAT overlay for the Raspberry Pi Pico . The module is equipped with L293D chip, which allows to control two DC motors or one stepper motor...
Index: SBC-20397
Index: SBC-20397
24V/10A PWM/USB motor controller - DFRobot DRI0050
DC motor or LED strip driver, controlled via PWM interface. The driver allows you to adjust the speed of the motor or the brightness of the LED strip through the...
Index: DFR-20683
Index: DFR-20683
HRB8825 2-channel stepper motor driver 28V/2,5A - HAT For Raspberry Pi - Waveshare 22311
Two-channel stepper motor driver from Waveshare, in the form of a HAT shield for the Raspberry Pi. The controller is based on two HR8825 systems, it works with a voltage from...
Index: WSR-21705
Index: WSR-21705
ESP32 Servo Driver Expansion Board - UART servo driver - WiFi, Bluetooth - Waveshare 21593
The controller is based on the ESP32 microcontroller with wireless Bluetooth , WiFi communication and ESP-NOW support. Designed to control the operation of servos via...
Index: WSR-21964
Index: WSR-21964
Motor regulator DC 12-40V/10A/400W - with a speed control knob
A simple controller with an integrated rotary potentiometer to control the speed of a DC motor up to 400 W. Powered from 12 V to 40 V.
Index: MOD-06666
Index: MOD-06666
DFRobot HR8833 - two-channel driver for DC 10V/1,5A motors
A miniature, two-channel DC motor controller. The device operates on the basis of PWM signal. The motor supply voltage is from 3.3 V to 10 V, maximum current is 1.5 A.
Index: DFR-06934
Index: DFR-06934
Cytron MD10 - 1-channel motor driver 30V/10A - Shield for Arduino
Shield for Arduino with single-channel driver for DC motors operating with a voltage from 7 V to 30 V and current up to 10 A (short term 15 A). It has NMOS H-Bridge. The board...
Index: CTN-12401
Index: CTN-12401
TB6612 Motor Shield - 4x DC motor driver - 12V/1,2 A - Shield for Arduino
The module allows you to control four DC motors (DC), with two stepper motors or two servos using Arduino kits. The system allows you to adjust the direction and speed of...
Index: GRL-12811
Index: GRL-12811
Motor Driver HAT TB6612FNG - dual channel 12V/3A for Raspberry Pi - SB Components SKU21789
Overlay for Raspberry Pi equipped with 40-pin GPIO connector, including model 4B / 3B+ / 3B. HAT features a TB6612FNG dual channel DC motor driver, operating from 6 V to...
Index: SBC-20401
Index: SBC-20401
TB6612FNG - two-channel motor controller
Two-channel H-bridge. Continuous current per channel 1,2 A momentary up to 3,2 A. Supply voltage up to 15 V. Housing SSOP-24 (SMD).
Index: UCC-00495
Index: UCC-00495
MAX14870 - single-channel motor controller 36V/1.7A - Pololu 2961
Single-channel DC motor controller. Continuous current per channel 1.7 A (momentary to 2.5 A). Supply voltage from 4.5 V to 36 V.
Index: PLL-04200
Index: PLL-04200
Cytron Shield-MDD10 - two-channel DC motor driver - 7V-30V/10A - Shield for Arduino
A module that allows you to control two DC motors or one stepper motor using Arduino. The overlay allows you to adjust the direction and speed of motors with current...
Index: CTN-14815
Index: CTN-14815
MP6550 - single-channel motor controller 22V/1,7A - Pololu 4733
Driver based on the MP6550 chip that allows you to control the speed and direction of one DC motor. It works with motors powered by a voltage of 1.8 V to 22 V , with a...
Index: PLL-22594
Index: PLL-22594
DFRobot - Dual channel DC motor driver - 27V/7A
A two-channel DC motor controller. The device operates on the basis of PWM signal. Supply voltage for motors ranges from 6.5 V to 27 V, the maximum current is 7 A.
Index: DFR-07421
Index: DFR-07421
Motor Shield 2x L293D 24V/1A - 4-channel motor controller for Raspberry Pi
Shield allows to control the four DC motors (DC) or two stepper motors. Board designed for Raspberry Pi 4 B, 3 B and 2 B. It has two H bridges in the form of chip L293D .
Index: SBC-09241
Index: SBC-09241
MP6500 Stepper Motor Driver Carrier, Digital Current Control - Pololu 2968
A stepper motor driver based on the MP6500 chip . Powered by a voltage range of 4.5 - 35 V, with a maximum current consumption of 2 A per coil. Maximum resolution: 1/8 step....
Index: PLL-10880
Index: PLL-10880
DC Motor Driver HAT V1.0 - 2-channels motor driver 12V/1,2A - HAT for Raspberry Pi - DFRobot DFR0592
Two-channel DC motor controller TB6612FNG operating with voltage from 7 V to 12 V and continuous current 1.2 A per channel and momentary 2 A. The module in the form of an...
Index: DFR-15298
Index: DFR-15298
M3H550 - triple motor controller DC 22V/1,7A - for Raspberry Pi - soldered - Pololu 5071
A shield for Raspberry Pi that allows you to control three motors powered by voltage from 1.8 V to 22 V. It uses the I2C interface to communicate with the minicomputer....
Index: PLL-23647
Index: PLL-23647
A4988 - stepper motor driver RepRap 35V/2A - Pololu 1182
Stepper motor driver based on the A4988 system. Voltage supply in the range of 8 to 35 V with maximum current consumption of 2 A per coil. Maximum resolution: 1/16 of a step....
Index: PLL-00148
Index: PLL-00148
See also
- Computer accessories
- Automobile accessories
- Cooling
- Diodes
- Sound and acoustics
- Mounting components
- Passive elements
- Wearables (e-textiles, smart clothes)
- Cameras and recorders
- Memory cards & disks
- Communication
- Converters
- Electronics courses
- Microcontrollers
- Animal repellers
- LED lighting
- Programmers
- Relays
- Voltage regulators
- Artificial intelligence
- Integrated circuits
- Displays and screens
- Tablets and smartphones
- Consoles