Description: Filament Fiberlogy PP 1,75 mm 0,75 kg - Yellow
Filamentpolypropylene in yellow, produced by Fiberlogy. PP printing material is used, among others, in the automotive and medical industry.It is non-toxicand does not emit an unpleasant smell during printing. It is characterized by high resistance to chemicals. Net weight of the filament wound on the spool is0.75 kg.
In our offer of filaments you will also find other materials and colors.
Fiberlogy PP 1.75 mm 0.75 kg filament - Yellow.
Properties of the PP Fiberlogy PP filament
- No unpleasant odour during printing
- The filter is non-toxic and resistant to chemicals
- It shows a high degree of bonding of incremental layers
- Polypropylene prints may come into contact with food
Printing instructions
- Filament for printing does not require a closed chamber
- For better adhesion of the printout to the table it is possible to use polypropylene tape
- Optimum retraction setting: from 2 mm to 3 mm
- The manufacturer recommends setting the raft
- Recommended print speed: approx. 35 mm/sec.
- Suggested airflow setting: up to 25%
Suggested print parameters for filament
| Print temperature: | from 220°C to 250°C |
| Table temperature: | up to80°C |
| Cooling of the printout (airing): | up to 25% |
| Due to design differences between printers, the above data should be treated as a guide and the corresponding values should be determined experimentally. |
PP filament specification
| Parameter | Scope |
|---|---|
| Diameter of the filament: | 1.75 mm |
| The dimensional tolerance of the philanthropy: | +/- 0.02 mm |
| The color: | Yellow |
| Print temperature: | from 220°C to 250°C |
| Table temperature: | up to 80°C |
| Material: | polypropylene (PP) |
| Reel diameter: | 200 mm |
| Reel width: | 80 mm |
| Mounting hole diameter: | 52 mm |
| Moisture absorber: | Yes |
| Vacuum packing: | Yes |
| Roughness: | +/- 0.01 mm |
| Package dimensions: | 205 x 205 x 90 mm |
| Net weight: | 0,75 kg |
PP filament properties graph.
|
Prints made ofpolypropylene are recycled. Unnecessary elements can be separated with other waste and reused. |
Useful links |
