Pressure sensors - Strona 2
OpenScale - strain-gauge bridge ATmega328P - SparkFun SEN-13261
Module for measuring the weight and temperature. It is used to read data from the strain-gauge sensors. It allows for calibration, setting the sampling frequency and accuracy....- Sale
- SPECIAL OFFERS
FlexiForce Pressure Sensor - 100lbs - SparkFun SEN-08685
Pressure sensor reduces its resistance when the force put to its tip, increases. Sensor with a length of 216 mm, the maximum pressure is approx. 45 kg.- Sale
- SPECIAL OFFERS
24-bit ADC module for strain gauge beams - HX711 - Adafruit 5974
Adafruit module with a precise 24-bit ADC converter , ideal for supporting strain gauges and Wheatstone bridges. Equipped with selective amplification (channels A: 64x /...Grove - force sensor FSR402 with module - 2kg
Module from the Grove series, is equipped with a sensor of pressure force FSR402. The sensor communicates with the analog voltage signal. It is able to detect a pressure in...Force sensor round 5mm (0.25 '') - short connector - Pololu 2727
Pressure sensor reduces its resistance when the force put to the round tip, increases. The sensor with the short connector, round, with about 5 mm diameter.Deflection sensor 112x6,3mm - SparkFun SEN-08606
During the bending, sensor increases its resistance. It can be used to detect the movement of your hand. Sensor length: 112 mm.HX711 - amplifier for a strainer beam - SparkFun SEN-13879
Operational amplifier is designed to handle strain beams. The system is supplied with the voltage from 2.7 V to 5.0 V, communicates via a two-wire bus: the data line and a...Deflection sensor 73x6,3mm - SparkFun SEN-10264
During the bending, sensor increases its resistance. It can be used to detect hand movements, for example, crimping fists. Sensor length is 55 mm.Piezoelectric membrane with wires - 20mm - SparkFun SEN-10293
The piezoelectric elements are useful for detecting the vibration or knocking. You can use them in a simple way by reading the voltage at the output. It can also be used for...MPR121 - Gator Breakout touch sensor - 12-channel - capacitive - STEMMA QT / Qwiic - Adafruit 4830
The Gator Breakout sensor allows to detect touch . It is equipped with the MPR121 chip. Made in capacitive technology, it provides the user with 12 channels , which allow...Force sensor linear potentiometer - 36x10mm - Pololu 2729
The pressure sensor changes its resistance depending on the size and point of application of force on the measurement bar with the length of 36 mm. Sensor allows you to easily...Force sensor - linear potentiometer 100x10mm - adjustable length - Pololu 2730
The pressure sensor changes its resistance depending on the size and point of application of force on the measurement bar with the length of 100 mm. Sensor allows you to easily...See also
- Inductive sensors
- Hall effect sensors
- Oxygen sensors
- Optical sensors
- Resistance sensors
- Door sensors
- Piezoelectric sensors
- RPM sensors
- Twilight sensors
- Tilt sensors
- Accelerometers
- Alarm sensors
- 9DoF IMU sensors
- Pressure sensors
- Air quality sensors
- Sound sensors
- Gesture sensors
- Gas sensors
- Limit switches
- Sensors of light and color
- Magnetic sensors
- Medical sensors
- Sensors odbiciowe
- Distance sensors
- Inductive contactless sensors
- Weather sensors
- Liquid level sensors
- Current sensors
- Flow sensors
- Motion sensors
- Temperature sensors
- PT100 temperature probes
- Humidity sensors
- Fingerprint readers
- Encoders
- Photoresistors
- Phototransistors
- IR receivers
- Magnetometers
- Gyros
- Sensor sets
- Grove modules
- Gravity modules
