Navigation accompanies man from the first attempts to traverse unknown areas. To find out about this, it is enough to recall the stories of ancient sailors and travelers on dry land who used a number of achievements of contemporary science and technology, such as star navigation or compass. Today, the role of the sun and other stars has been taken over by modern GPS and GLONASS systems.
LTE GPS HAT - LTE / GPRS / GPS SIM7600E-H - for Raspberry 4B/3B+/3B/2B/Zero - Waveshare 14952
Shield for Raspberry Pi that allows you to send text messages and create calls in the GSM network. It also has a GPS module. It supports LTE CAT4 up to 150 Mbps. It...
Multi-GNSS module - L76K - GPS, BeiDou (BDS), GLONASS, QZSS - Waveshare 23721
The L76K GPS module manufactured by Waveshare is a Multi-GNSS module, supports GPS , BeiDou (BDS), GLONASS and QZSS systems and enables precise positioning in...
Grove - GPS module (Air530) with antenna - Seeedstudio 109020022
Grove - GPS (Air530) is a satellite navigation and positioning module with an external antenna with a U.FL connector, supporting multiple location systems such as GPS,...
Cap HAT GSM / GPRS / GNSS / Bluetooth for Raspberry Pi - Waveshare 13460
Cap adjusted to the GPIO connectors for Raspberry Pi 3 / 2 / Zero / Zero, which provides connection through standard GSM, GPRS, GPS and Bluetooth. Allows voice chat, to send...
Device Prototype Micromis GPS Shield - GPS Module - for Micromis Base V1
Micromis GPS Shield is an overlay for Micromis Base V1 based on the Quectel L70 system and enabling location determination. It is designed to enable precise position and...
GPS module UBX-G7020-KIT + case - DFrobot
GPS UBX-G7020-KT module has a 56-channel GPS receiver, it operates with a voltage from 3.3 V to 5 V. The update frequency is from 1 Hz to 10 Hz. Communication is via the serial...
DFRobot - SIM7600CE-T 4G (LTE) - shield do Arduino
Shield for Arduino module which allows you to send text messages and create calls in the GSM network. It is also equipped with GPS and LTE module. It communicates via UART...
Antenna Square GPS 2.4V - 5V SMA - 3m
GPS antenna at 1575.42MHz Β± 1.02 MHz. Standard cable length is 3 meters. The antenna has a magnetic base so we can place it on a metal surface, e.g. on a car roof. It is...
DFRobot Shield NB-IoT / LTE / GNSS / GPRS / GPS SIM7070G - Shield for Arduino - DFRobot DFR0572
An Arduino shield that allows you to send text messages and create connections in the GSM network. It also has a GPS and LTE module. It communicates via the UART serial...
LTE GPS HAT - NB-IoT / LTE / GPRS / GPS SIM7000E - for Raspberry Pi 3B+/3B/2B/Zero - Waveshare 14865
Shield for Raspberry Pi that allows you to send text messages in the GSM network. It also has a GPS and LTE module. It communicates via serial interface UART (RX, TX) using the...
GPS ZOE-M8Q module - Qwiic - SparkFun GPS-15193
ZOE-M8Q is a highly accurate, miniature tile with a 72 channel GNSS receiver capable of receiving signals from GPS, GLONASS, BeiDou and Galileo. It communicates via SPI / I2C...
Gravity - BeiDou GNSS GPS receiver module - I2C/UART - DFRobot TEL0157
GNSS GPS BeiDou receiver module with Gravity connector manufactured by DFRobot. The GNSS positioning module supports positioning of both single and multiple systems. Works...
Trekko Pico GPS Logger - Multi-GNSS positioning module - L76K - RP2040 - SB Components 28405
Trekko Pico GPS Logger is an advanced position logger that combines a compact design with a modern RP2040 microcontroller and L76K GNSS module . Support for GPS, GLONASS,...
Ultimate GPS Hat + RTC for Raspberry Pi A+/B+/2/3/4 - Adafruit 2324
Do you want to know where your Raspberry Pi is at any time of the day or night? This shield allows you to read the actual time and position with a frequency of 10 Hz using a...
SparkFun GPS Breakout - GPS module with SAM-M10Q chip and antena - Qwiic - SparkFun GPS-21834
SparkFun GPS Breakout - SAM-M10Q is the successor to the popular and frequently used SAM-M8Q GPS module from the same manufacturer. Compared to its predecessor, it has lower...
FeatherWing Ultimate GPS MTK3339 GPS module with antenna - trim to Feather - Adafruit 3133
Module from the Feather family is equipped with a GPS system. It can track 22 satellites, is working with a voltage from 3.0 V to 5.5 V, the frequency of the update is 10 Hz....
GNSS MAX-M10S module - Qwiic - SparkFun GPS-18037
SparkFun GNSS Receiver Breakout is a high-quality GNSS receiver with a built-in MAX-M10S chip and an SMA antenna connector. It enables simultaneous reception and processing...
Ultimate GPS GNSS with USB - MTK3333 GPS module with antenna - Adafruit 4279
The Ultimate GPS GNSS module with USB is a compact device that provides high-accuracy position tracking with 99 channels and a 10 Hz update rate. Equipped with a USB - UART...
Antenna GPS Embedded with SMA connector - SparkFun GPS-00177
GPS antenna, designed for small mobile projects. It is supplied with the voltage of 3.3 V, it has a gain of 26 dB, it is equipped with a standard SMA connector with a cable...
XA1110 - MediaTek MT3333 10Hz GPS module - I2C / UART - SparkFun GPS-14414
GPS module based on MediaTek MT3333 chipset. It communicates via I2C or UART interface. The update frequency is 10 Hz, the sensitivity is165 dBm. The applied system can track...
GPS SAM-M8Q module - Qwiic - antenna PCB - SparkFun GPS-15210
SAM-M8Q is a highly accurate, miniature board with 72-channel GNSS receiver that can receive signals from GPS, GLONASS, BeiDou and Galileo. It communicates using SPI / I2C or...
SIM8262E-M2 5G HAT - GNSS/GPS 5G/4G/3G overlay + case for Raspberry Pi - Waveshare 23254
SIM8262E-M2 5G HAT is an expansion module for Raspberry Pi that allows you to connect the device to a 5G network . The overlay is compatible with Windows, Linux and Android...
Dual-band GPS/RTK L1+L5 module with LC29H(DA) GNSS chip - overlay for Raspberry Pi - Waveshare 25279
Dual-band GPS module with GNSS receiver LC29H(DA) designed for Raspberry Pi minicomputers, supporting L1 and L5 bands. It provides fast and precise centimeter-level...
GPS/BDS AT6668 - Unit expansion module for development modules M5Stack
Module based on AT6668 and MAX2659 navigation system. The device supports many types of satellite navigation, allows receiving signals from 50 GNSS channels from 6...See also
The basic purpose of GPS and GLONASS modules is to precisely determine the location of the device in the form of geographic coordinates (latitude and longitude) returned by the module. A huge advantage of these systems is the availability of satellite signals in virtually all areas of the Earth, although depending on the local conditions of electromagnetic wave propagation, signal reception may be difficult in some places. Importantly, the greater the number of satellites "visible" to the receiver, the better the tracking accuracy. It is worth knowing that global geolocation systems operate by measuring the propagation time of signals from individual satellites, using extremely precise atomic clocks. Information about the current time can therefore be used to synchronize the device's local real-time clock with time standards available around the world.
Our offer includes a number of small GPS/GLONASS modules, perfect for use in small mobile robots, portable devices and all prototype systems. A good example is the small, 72-channel SparkFun ZOE-M8Q module, compatible - in addition to the two systems mentioned above - also with the European Galileo system and the Chinese BeiDou. Our offer also includes a small Adafruit Ultimate GPS MTK3339 module with a built-in antenna, 22-channel GPS receiver and Flash memory. For applications in the wearable segment, a tiny Adafruit FLORA receiver was created, also based on the MTK3339 chip, but built on a round printed circuit board with a diameter of 30 mm with special, large pads that allow the board to be sewn into clothes using conductive threads.
In addition to universal modules, in our store you will also find overlays prepared especially for the most popular embedded platforms: Arduino and Raspberry Pi. For the former, we have excellent DFRobot Shield DB-Io/LTE/GPRS/GPS modules. On a small board the size of an Arduino Uno, designers from DFRobot managed to place a GSM module with LTE and GPRS support, a GPS/GLONASS/BeiDou/Galileo receiver and an integrated BME280 environmental parameter sensor, offering measurement of ambient temperature, atmospheric pressure and humidity. For fans of "malinki" we have prepared, among others: Waveshare LTE GPS Hat overlay, compatible with Raspberry Pi 3B+/3B/2B/Zero and offering GNSS, GSM and NB-IOT connectivity.
The GPS module is an electronic element that allows determining geographical location based on communication with a satellite system. Elements of this type are used, among others, in mobile phones, GPS navigation and locators .
