Motors - Strona 3
Micro motor N20-BT39 1000:1 32RPM - 9V
The N20 series miniature motor with 1000:1 gearing, has 32 RPM, torque is 9 kg*cm (0.883 Nm). The supply voltage is from 3V to 9V.Turbo Metal Gear Worm Motor (12V 40RPM 8kg.cm)
The motor uses a metal worm gear to achieve high strength and high torque of 8 kg*cm (0.78 Nm). It is powered by 12V and has a speed of 40 rpm.Dagu motor gear with 75:1 6V 133RPM
Motor with 75:1 metal gearbox providing 12 kg*cm (1.1 Nm) of torque. The supply voltage is 6 volts and the speed is 133 rpm.DFRobot Gravity - Propeller with DC 3-6V Motor Module
A small motor module with controller with speed control capability. The device is compatible with Arduino . A propeller and cable are also included.Micro motor N20-BT39 1000:1 14RPM - 9V
The N20 series miniature motor with 1000:1 gearing, has 14 RPM, torque is equal to 5 kg*cm (0.49 Nm). The supply voltage is from 3V to 9V.Vibration Motor 10 x 3,0 mm C1030B015F
Small motor that generates vibrations at 1000 rpm. It consumes about 100 mA of current with a 3 V supply.DC motor with 1:90 3-9V transmission with single shaft - Bi-Metal
Motor with 1:90 gear . After shifting, a single shaft rotates at a speed of up to approx. 113 rpm when powered by 6 V. It is powered by voltage from 1.8 V to 9 V and...Linear Actuator Super Power Jack Mini 1000N 5,4mm/s 12V - 25cm stroke
Electric actuator powered with 12 V voltage. Device has a load capacity of 1000 N (100 kg), works with a speed of 5.4 mm/sec. Maximum current supply is 1.5 A. Pulse generator...Linear Actuator Super Power Jack 2000 N 7,5 mm/s 24V - 25cm stroke
Super Power Jack electric actuator powered by 24 V DC . The unit has a 2000 N (200 kg) load capacity and operates at 7.5 mm/sec . The unit's current consumption is up to...37Dx57L Motor with 150:1 Gear 24V 68RPM - Pololu 4687
DC motor with 150:1 gearbox by Polol. Powered by 12 V to 24 V , it draws an average of 100 mA of current and up to 3000 mA when the shaft is stopped. Polol's motor speed is 68...DC Motor Dagu DG01D with 48:1 Gear 4,5V with double sided shaft - 2pcs.
Plastic motor with 48:1 gearbox. Dual shaft turns at up to approx. 90 rpm, torque is 0.8 kg*cm (0.078 Nm). Powered by 4.5 volts, it draws an average of 190 mA of current (max...Stepper motor JK42HS40-1704 200 steps 2.8V/1.7A/0.4Nm
Bipolar stepper motor, four wire. It has a resolution of 200 steps per revolution (1.8 degrees). It is powered by 2.8 V and draws 1700 mA per coil. The torque is 4.0 kg*cm (0.4...- Reduced price
- Promotion
HP Motor with 75:1 Gear - Pololu 2361
A miniature high-power motor by Pololu with a gearbox of 75: 1, has 400 rpm, the torque is 1.6 kg * cm (0.156 Nm).Mini Vibration Motor 10x3mm - 3V
Small vibrating motor with a diameter of 10 mm and a height of 3 mm . Powered by 3 V . Current consumption is 80 mA . The motor has two red and blue wires with the...DC Motor Dagu DG02S-L with 48:1 Gear 4,5V - angular with double sided extended shaft - 2pcs.
Angle motor with 48:1 gearbox. Plastic double-shaft gearbox rotates up to approx. 90 rpm, torque is 0.8 kg*cm (0.078 Nm). Powered by 4.5 V, it consumes an average of 190 mA of...DC Motor Dagu DG01D with 120:1 Gear 4,5V - double sided shaft - 2pcs.
Plastic motor with 120:1 gearbox. Dual shaft turns at up to approx. 60 rpm, torque is 0.8 kg*cm (0.078 Nm). Powered by 4.5 V, it draws an average of 190 mA of current (max 250...Metal DC Geared Motor - 6V 133RPM 4.5kg.cm
Metal gearing motor providing 4.5 kg*cm (0.44 Nm) of torque. Supply voltage is 6 V and speed is 133 rpm.Linear Actuator Super Power Jack 2000N 7,5mm/s 12V - 30cm stroke
Electric actuator powered with 12 V voltage. Device has a load capacity of 2000 N (200 kg), works with a speed of 7.5 mm/sec. Maximum current supply is 4.2 A. Pulse generator...Linear Actuator LA10 500N 13mm/s 12V - stroke 5cm
Linear actuator with a maximum load capacity of 50 kg (500 N) and 5 cm extension. It is powered by 12 V . It has a protection class of IP65. The actuator has two built-in...Vibration damper for NEMA17 stepper motor
Vibration damper designed for mounting on NEMA17 stepper motors, used, among others, in 3D printers. The use of a vibration damper enables the reduction of noise and...DC Motor Dagu DG01D-L with 48:1 Gear 4,5V - double sided shaft - 2pcs.
Plastic motor with 48:1 gearbox. Dual shaft turns at up to approx. 140 rpm, torque is 0.8 kg*cm (0.078 Nm). Powered by 4.5 volts, it draws an average of 190 mA of current (max...Micro motor N20-BT05 50:1 625RPM - 12V
N20 series miniature motor with 50:1 gearing, has 625 RPM, torque is 1.1 kg*cm (0.108 Nm). The supply voltage is from 3V to 12V.Micro motor N20-BT24 50:1 625RPM - 9V
The N20 series miniature motor with 50:1 gearing, has 625 RPM, torque is equal to 1.1 kg*cm (0.107 Nm). The supply voltage is from 3V to 9V.