- New
Filament Print-Me Swift PETG V0 1,75mm 0,85kg - Natural
Index: PRI-25035
- New
- Reduced price
- Promotion
Strip LED SMD2835 IP65 4,8W, 60 LED/m, 8mm, cold white - 5m
Index: LED-07092
- Reduced price
- Promotion
- Reduced price
- Promotion
Filament Fiberlogy Easy ABS 1,75mm 0,75kg - Light Green Transparent
Index: FLA-18634
- Reduced price
- Promotion
- Reduced price
- Promotion
DRV8801 - single-channel motor controller 36V / 1A - Pololu 2136
Index: PLL-01256
- Reduced price
- Promotion
SENSORS - Strona 18
Loading...
DFRobot Gravity - VEML7700 digital ambient light sensor - I2C
The module is compatible with Arduino, equipped with a digital light sensor with a resolution of 16-bit, it is powered with the voltage in the range from 3.3 V to 5.5 V. It...
Index: DFR-09528
Index: DFR-09528
Inductive proximity sensor E2S-H4N1 4mm 10-30V
The E2S-H4N Inductive Proximity Sensor allows metal detection up to 4 mm away. It has a 200 cm cable length. The response time is less than 1 ms and the switching...
Index: DNG-17435
Index: DNG-17435
High temperatura probe PT100 - 7x200mm
Waterproof analogue sensor with the high temperature working in the range from -200°C to 420°C. The output is resistance dependent on temperature. Probe length is 200 mm.
Index: SES-07467
Index: SES-07467
High temperatura probe PT1000 - 6x50mm
Waterproof analogue sensor with the high temperature working in the range from -30 °C to 500 °C. The output is resistance dependent on temperature. Probe length is 50 mm.
Index: SES-07470
Index: SES-07470
Gravity - segment display 4-digital I2C - red - DFRobot DFR0645-R
4-digit, 8-segment Gravity series display , allows you to adjust the brightness of the displayed characters, thanks to 8-stage adjustment, The device has an I2C port...
Index: DFR-16310
Index: DFR-16310
DFRobot Gravity - water vapor sensor
The vapor sensor is compatible with Arduino. When the humidity increases, output voltage increases. It can be used in projects such as a rain detector or touch sensor based on...
Index: DFR-11285
Index: DFR-11285
Grove - a set of 5 female-female 4-pin - 2mm/20cm I2C splitters
A set of five 4-pin wires Grove. With them you can connect two I2C Grove modules to one connector of the I2C bus, for example on the Base Shield v2 board. Cables are compatible...
Index: SEE-04396
Index: SEE-04396
DFRobot Gravity: Analog 20A Current Sensor
Current sensor operating in the range up to 20 A and up to 311 Volts on the basis of the Hall effect. The output is an analog voltage. The supply voltage is 5 V.
Index: DFR-08367
Index: DFR-08367
Module from the Grove series, based on the system LM2904 and a microphone. It can be powered with a voltage ranging from 3.5 V to 10 V. The output is the analog signal. The...
Index: SEE-11332
Index: SEE-11332
IDC 10pin 1,27mm - microUSB adapter for PMS7003 sensor
The adapter allows for signal transmission from the connector IDC 10 pin on the microUSB connector that allows to connect the sensor directly to the computer. The module is...
Index: DNG-13445
Index: DNG-13445
BleBox humiditySensor v2 - WiFi temperature and humidity sensor
BleBox humiditySensor v2 is a small sensor that communicates via a local WiFi network, allowing you to measure relative humidity and air temperature . Thanks to the wBox...
Index: BOX-22885
Index: BOX-22885
NTC 110 10kΩ thermistor with cable
The NTC 110 thermistor with the resistance of 10 kΩ. The connecting cable has a length of 50 cm.
Index: SES-04942
Index: SES-04942
DFRobot Gravity - voltage divider 1/5
A voltage divider is used, when the measured voltage has a larger value than the range of A/D converter. The device works in the range from 0,0245 V to 25 V. The output...
Index: DFR-11261
Index: DFR-11261
VCNL4010 - distance and light sensor 20cm I2C - Adafruit 466
A digital sensor measuring the distance ranging up to 20 cm and the intensity of the incident light. It communicates via the I2C bus (TWi), it works with a voltage of 3.3 V and...
Index: ADA-04969
Index: ADA-04969
DFRobot Gravity: Heart Rate Monitor Sensor For Arduino
Module for measuring heart rate of the human heart, compatible with Arduino. It works with voltage from 3.3 V to 6 V, the output is the analog or digital signal. The kit...
Index: DFR-07455
Index: DFR-07455
Digital sensor allows to measure atmospheric conditions, i.e. temperature from -40 °C to 85 °C, humidity from 0 to 100 %Rh and pressure from 300 hPa to 1100 hPa . The last...
Index: SPF-04901
Index: SPF-04901
- On sale!
- Promotion
Grove - water level sensor - 10cm - Seeedstudio 101020635
Sensor to measure the water level in a vessel up to 10 cm using the Arduino module. The measurement is made by volume . The tile is equipped with a Grove connector, for...
Index: SEE-16346
Index: SEE-16346
DFRobot KIT0011 - set of 27 modules with cables for Arduino
A set of 27 popular modules compatible with Arduino boards. In the set are i.a.: distance, light, touch, rotation, vibration, gas sensor, and a module with LED, relay and more....
Index: DFR-04297
Index: DFR-04297
Grove - MMA7660FC 3-axis digital accelerometer I2C
Module with 3-axis accelerometer based on MMA7660FC chip with digital I2C output and Grove connector. The MEMS sensor has a low power consumption and low profile. The module...
Index: SEE-15444
Index: SEE-15444
- Reduced price
- Promotion
Soil Moisture Sensor - SparkFun SEN-13322
The sensor to determine the moisture level of the soil. It is powered with the voltage from 3.3 V to 5 V. The output is the analog voltage which increases its value with...
Index: SPF-04570
Index: SPF-04570
BME680 multi-functional 4in1 environmental sensor - SPI / I2C - DFRobot SEN0375
A 4-in-1 MEMS multifunctional environmental sensor manufactured by DFRobot. It features an embedded BME680 chip. The module is a combination of a volatile organic compound...
Index: DFR-19199
Index: DFR-19199
MiFare RFID/NFC Classic keychain - 13,56MHz - Adafruit 363
The RFID /NFC identifier in the form of a transparent key-chain, is equipped with NXP S50 chip. Each chip has a unique 32-bit code. The devices work at a small distance from...
Index: ADA-02954
Index: ADA-02954
Piezoelectric sensor of vibration with mass - SparkFun SEN-09197
Piezoelectric vibration sensor, used for measurements of touch, vibrations, hits and flexibility. A small AC voltage and high voltage of up to 90 V, it occurs when the foil...
Index: SPF-10116
Index: SPF-10116
Gravity - BMI160 6DoF IMU - 3-axis accelerometer and gyroscope - DFRobot SEN0250
A 6-axis inertial motion sensor featuring the Bosch BMI160 MEMS chip. The module integrates a 16-bit 3-axis accelerometer and a 3-axis gyroscope . It is used to measure...
Index: DFR-19380
Index: DFR-19380