- New
- Reduced price
- Promotion
M5Stamp Timer Power - Power Control Module - BM8563 - M5Stack S005
Index: MSS-22675
- Reduced price
- Promotion
SENSORS - Strona 25
Loading...
The sensor consists of a 3-axis accelerometer, gyroscope and magnetometer. It can work as a system AHRS. It uses the advanced Kalman filter to calculate flight parameters. This...
Index: PLL-07620
Index: PLL-07620
Grove - TCS34725FN - digital I2C color sensor
Grove module for ambient light detection. The sensor used is TCS34725 with LED backlight and built-in IR filter . It communicates via I2C bus. It works with voltage up to...
Index: SEE-11318
Index: SEE-11318
Grove - LCD display 2x16 characters with RGB backlight
LCD display 2x16 characters with backlight in any color palette RGB. Communicates with the two-wire I2C bus. It is supplied with the voltage from 3.3 V to 5 V. T he kit...
Index: SEE-11326
Index: SEE-11326
Grove - mini limit sensor with roller
Module from the Grove series equipped with a limit switch with lever ended with roller. Working voltage is 3.3 V and 5 V. T he kit includes a cable adapted to Seeedstudio Base...
Index: SEE-11335
Index: SEE-11335
Color sensor TCS34725 I2C - Waveshare 16131
The Waveshare color sensor based on the sensor TCS34725 with a LED backlight and a built-in IR filter. Communication is carried out via the I2C bus.
Index: WSR-14429
Index: WSR-14429
DFRobot Gravity - IR receiver 38kHz
The IR receiver from the Gravity series, operating at a frequency of 38 kHz with a voltage of 5 V. The module allows to receive commands from the IR transmitter. The...
Index: DFR-11267
Index: DFR-11267
Adjustable motion PIR sensor with an interface compatible with the Grove series. It's a simple to use passive infrared sensor. Object detection is indicated digitally - via...
Index: SEE-13813
Index: SEE-13813
Fermion - 3-Axis Accelerometer - I2C LIS2DW12 - DFRobot SEN0405
Fermion series module with powerful 3-axis accelerometer LIS2DW12 , manufactured by DFRobot. It features low power consumption (50 nA) , as well as low noise. The module...
Index: DFR-19909
Index: DFR-19909
Inductive proximity sensor LJ30A3-15-Z / CY 15mm 6-36V
Inductive, digital proximity sensor with a cable with the length of 100 cm and nuts to facilitate mounting. It detects metal at a distance of 15 mm. The object detection is...
Index: DNG-11876
Index: DNG-11876
Module with photoresistor + cable - analog - Iduino ST1107
Module with photoresistor for Arduino. It can be used to measure the intensity of light. It is controlled via an analog signal, is powered with the voltage of 5 V. The set...
Index: OST-14301
Index: OST-14301
OpenScale - strain-gauge bridge ATmega328P - SparkFun SEN-13261
Module for measuring the weight and temperature. It is used to read data from the strain-gauge sensors. It allows for calibration, setting the sampling frequency and accuracy....
Index: SPF-07276
Index: SPF-07276
NTC 10kΩ thermistor with 2m cable
Thermistor of NTC type with a resistance of 10 kΩ. The connecting cable has a length of 2 meters.
Index: DNG-10931
Index: DNG-10931
DFRobot Gravity - vibration motor module
Module from the Gravity series with vibration motor for Arduino controlled with the PWM signal, low and high status. The supply voltage is 5 V.
Index: DFR-11287
Index: DFR-11287
AS7341 - 10-Channel Light / Color Sensor Qwiic/I2C - Adafruit 4698
The module is equipped with a 10-channel spectrum sensor, which is the spectrum of visible light. With it you can measure and characterize how different materials absorb and...
Index: ADA-17703
Index: ADA-17703
Grove - LED Strip Driver v2.0 - LED driver for Arduino - Seeedstudio 105020002
A module that allows you to control the brightness of monochrome LED strip with LED RGB brightness and color. It has 2-pin connectors, power supply screw connector, 4-pin screw...
Index: SEE-04443
Index: SEE-04443
Grove - PCA9685 - 16-channel server driver, 12-bit PWM I2C
A 16-channel PWM generator useful when there is no microcontroller output. It allows, among others: controlling servomechanisms, adjusting motor speed or changing LED...
Index: SEE-13511
Index: SEE-13511
3D printer Creality Sermoon V1 Pro XY-axis limit switch kit
XY axis limit switch, protecting against exceeding the maximum travel range. Used in Sermoon V1, Sermoon V1 Pro and Sermoon V2 3D printers. The sensor is mounted on a PCB ,...
Index: CRL-21517
Index: CRL-21517
- Reduced price
- Promotion
Digital Distance Sensor 130cm PWM - Pololu 4071
PCB with distance sensor based on Lidar technology. The sensor detects objects up to 130 cm and is powered from 3 V to 5.5 V . It is equipped with one PWM digital output,...
Index: PLL-19809
Index: PLL-19809
Inductive proximity sensor LJ30A3-10-Z / BY 10mm 6-36V
Inductive, digital proximity sensor with a cable with the length of 100 cm and nuts to facilitate mounting. It detects metal at a distance of 15 mm. The object detection is...
Index: DNG-11875
Index: DNG-11875
IDC 10pin 1,27mm - microUSB adapter for PMS7003 sensor - soldered pins
The adapter allows you to transfer the signal from the IDC 10 pin connector to the microUSB connector, this allows you to connect the sensor directly to your computer. The...
Index: ZES-16479
Index: ZES-16479
SHT35 - Digital Temperature and Humidity Sensor Breakout - DFRobot SEN0333
DFRobot temperature and humidity sensor with I2C communication. Its operation is based on the Sensirion SHT35 sensor chip. It is compatible with 3.3 V / 5 V Arduino type...
Index: DFR-17381
Index: DFR-17381
Index: KTR-18886
Gravity - I2C/UART connection cable set - PH2.0-male - 30cm - 5pcs - DFRobot FIT0916-M
The kit includes 5 pieces of 30 cm long connection cables from DFRobot. On one side they are terminated with a female PH2.0 connector compatible with the Gravity standard,...
Index: DFR-22466
Index: DFR-22466
Gravity Temperature & Humidity Sensor - DHT20 - DFRobot SEN0497
Precise temperature and humidity sensor equipped with DHT20 chip. Factory calibrated, has a connector compatible with the Gravity series. Product manufactured by DFRobot, is...
Index: DFR-20376
Index: DFR-20376