SENSORS - Strona 43
Essential Sensor Kit V2 - SparkFun SEN-20408
SparkFun Essential Sensor Kit V2 is a set containing carefully selected sensors ideal for both beginners and experienced users. With this kit you will be able to measure...Tuya - smoke detector - intelligent photoelectric sensor with audible indication - ZigBee - RTX ZSS3
A smoke detection device that combines modern photoelectric technology and a notification system in a mobile application . Thanks to its high efficiency, loud sound...- New
Sharp GP2Y0D810Z0F - digital distance sensor 10cm - Pololu 1135
Digital distance sensor Sharp GP2Y0D805Z0F to detect objects at a distance of up to 10 cm.IR remote control - for Khadas VIM2
IR remote control for minicomputer Khadas VIM 2. It works directly with Android. It can also work as a computer mouse. Powered by two AAA batteries.Optical encoder set for Pololu micro motors - 5V version - 2 pcs - Pololu 2590
A pair of optical quadrature sensors, designed for installation in micro motors from Pololu. It consists of a board with the sensor and the plastic impeller kit, it allows...Trim with QTR-3RC reflective sensors - digital - Pololu 2457
Compact bar with three reflective sensors with the size of 32 x 8 mm. It has analog outputs, it is powered with the voltage of 5 V.38kHz IR Proximity Sensor, Fixed Gain, Low Brightness - Pololu 2579
Proximity sensor, operating in the infrared range. It has a permanent amplification. This version of high brightness, consumes around 16 mA when powered at 5 V. The sensor...Trim with QTR-3A reflective sensors - analog - Pololu 2456
Compact bar with three reflective sensors with the size of 32 x 8 mm. It has analog outputs, it is powered with the voltage of 5 V.Grove - StarterKit v3 - IoT starter package for Arduino
Starter set introducing the world of IoT (Internet of Things) for Arduino boards. The set includes i.a.: sensors of light, touch, temperature, servo, display and many others....Optical encoder set for Pololu micro motors - version 3,3V - 2 pcs - Pololu 2591
A pair of optical quadrature sensors, designed for installation in micro motors from Pololu. It consists of a board with the sensor and the plastic impeller kit, it allows you...Arduino MKR Connector Carrier ASX00007 - shield for Arduino MKR
Module for Arduino from the MKR that extends the capabilities of I/O pins. It is designed for modules and sensors from the Grove series. It has 4-pin connectors, works with...DFRobot Gravity - 2x16 I2C LCD display - green
LCD display 2x16 characters with backlight in green. Communicates with two-wire I2C bus. The kit includes a cable adapted to Gravity DFRobot IO Expansion Shield.Reflectance sensor QTR-L-1RC - digital (2 pcs) - Pololu 2455
Module with reflective sensor basing on the transmitting LED and phototransistor operating in the infrared range. The sensor is powered with the 5V voltage. The output is the...DFRobot Gravity - analog temperature sensor LM35
Analog LM35 sensor working with Arduino and Raspberry Pi. It is powered with the voltage from 3.3 V to 5 V. it can measure temperature in the range from 0 ℃ to 100 ℃. The...Magnetic Encoder Pair Kit for Mini Plastic Gearmotors, 12 CPR, 2.7-18V - Pololu 1523
A pair of magnetic quadrature sensors, designed for installation in plastic mini angle motors from Pololu. It consists of a board with the Hall sensor and the plastic impeller...Waterproof temperature sensor - DS18B20 - DFRobot DFR0198
The DS18B20 temperature sensor is encapsulated in a sealed enclosure, allowing it to measure the temperature of places away from the main controller or in wet conditions. The...DFRobot Gravity - grayscale sensor
Analog grey sensor which is able to measure the light intensity from black to white. Scale of gray is also defined as black and white, with the darkest shade of gray as black...Force sensor linear potentiometer - 36x10mm - Pololu 2729
The pressure sensor changes its resistance depending on the size and point of application of force on the measurement bar with the length of 36 mm. Sensor allows you to easily...Dust / air quality sensor - PM2,5 PMS1003 - 5V UART
Laser dust sensor that allows you to monitor air purity in real time. It measures PM2.5. The system is powered by 5 V, while the interface works with 3.3 V and communicates...Gravity DFRobot IO Expansion + TB6612FNG 2-channel motor driver 12V/1.2 A - Shield for Arduino
Shield for Arduino which is an extension of the i/O pins and two-channel driver for DC motors TB6612FNG with a voltage of 12 V and performance of 1.2 A per channel. It also has...DFRobot Gravity - IO Expansion Shield for LattePanda
Shield for minicomputer LattePanda of Gravity And/O all GPIO pins that are compatible with standard Arduino and does not interfere with other LattePanda outputs. Every...Rangefinder - TF03 LiDAR sensorIP67 - 180m - UART, CAN
Accurate laser distance sensor operating in the range from 0.1 to 180 m with an accuracy of 0.1 m. The supply voltage is 5 V. The device communicates using the UART, CAN,...MLX90614ESF-BCF IR - digital infrared thermometer I2C
Sensor that uses IR to measure temperature in the range from -70 °C to 380 °C. It is communicating via the I2C bus (SMBus) or PWM interface, it has a built-in 17-bit ADC...SS-HDC2010 + CCS811 I2C - temperature, humidity and air purity sensor module
The module is equipped with sensors HDC2010 , which is responsible for checking ambient air quality and CCS811 , which is responsible for measuring temperature and...