- EOL
|
Attention! The product has been discontinued. Check other products in category. |
Product description: Ultra Thin ICE Tower Cooling Fan - ultra thin fan for Raspberry Pi 4B - adjustable speed - Waveshare 23093
The ultra-thin ICE Tower Cooling Fan from Waveshare is designed to cool the Raspberry Pi 4B . It has an additional adjustment using PWM , thanks to which it is possible to set the speed of rotation of the blades according to individual needs. The maximum number of revolutions is about 5300±10% rpm . The fan is also equipped with a heat sink and a copper pipe with a diameter of 4.5 mm and a length of 3 mm, which help dissipate heat generated by the board. The components used allow the CPU temperature to be kept below 45°C, also during extreme operating conditions.
The Ultra Thin ICE Tower Cooling Fan is equipped with a copper tube with a diameter of 4.5 mm.
Benchmark using sysbench on a Raspberry Pi 64-bit operating system.
Special features of the fan
- Adjustable fan blade rotation speed using PWM
- Additional copper pipe and heat sink dissipate heat away from the board
- Thin and light structure that does not limit the design possibilities of the module
- Only compatible with Raspberry Pi 4B
Product compatible with Raspberry Pi 4B!
Also check the manufacturer's user guide . There you will find, among others, instructions for assembling elements and sample program code.
Pin description
The fan has 3 leads in different colors that should be connected to the Raspberry Pi in accordance with the following:
- Blue wire - PWM signal - TXD / D12 / D18 pins *
- Red wire - 5 V - supply voltage
- Black wire - GND - system ground
*When using a fan adapter, the default PWM pin is D12 (GPIO12).
Connecting the pins.
Raspberry Pi must be purchased separately.
Fan technical specification
- Compatible with: Raspberry Pi 4B
- Supply voltage: 5 V DC (power supply from Raspberry Pi)
- Construction: ICE Tower
- Additional components: heat sink and 3 x 4.5 mm copper tube
- Rated power: 0.6W @ 5V / 0.12A
- Adjustable rotation speed: yes, PWM
- Maximum rotation speed: 5300±10% rpm
- Fan dimensions: 40 x 40 mm
Kit contents
- Ultra Thin ICE Tower Cooling Fan - ultra thin fan for Raspberry Pi 4B
- Acrylic mounting pad
- Screwdriver
- Thermally conductive tapes
- Mounting elements - screws and spacers
Components included in the set.
Useful links |
