Gravity modules - Strona 3
DFRobot Gravity - digital button Tact Switch - red
Digital monostable switch with 3-pin connector. It is powered with the voltage from 3.3 V to 5 V, it works with Arduino modules.DFRobot Gravity: Analog 20A Current Sensor
Current sensor operating in the range up to 20 A and up to 311 Volts on the basis of the Hall effect. The output is an analog voltage. The supply voltage is 5 V.DFRobot Gravity: Heart Rate Monitor Sensor For Arduino
Module for measuring heart rate of the human heart, compatible with Arduino. It works with voltage from 3.3 V to 6 V, the output is the analog or digital signal. The kit...DFRobot Gravity - digital blue button
Digital monostable switch with 3-pin connector. It is powered with the voltage from 3.3 V to 5 V, it works with Arduino modules.DFRobot Gravity - water vapor sensor
The vapor sensor is compatible with Arduino. When the humidity increases, output voltage increases. It can be used in projects such as a rain detector or touch sensor based on...DFRobot Gravity - digital button Tact Switch - green
Digital monostable switch with 3-pin connector. It is powered with the voltage from 3.3 V to 5 V, it works with Arduino modules.Gravity - kit with temperature sensor DS18B20 - DFRobot KIT0021
A set consisting of a waterproof probe with a DS18B20 sensor, an adapter for digital and analog sensors with clamp connectors and a Gravity connecting cable . The sensor...DFRobot Gravity - 2x16 I2C LCD display - black with RGB backlight
LCD display 2x16 characters with black backlight, it can display the font in any colour from the RGB palette. Communicates with two-wire I2C bus. The kit includes a cable...Gravity - I2C - 2x UART converter - DFRobot DFR0627
A module that allows to derive two UART interfaces from the I2C interface. The maximum transmission speed is 1 Mb/s , each UART interface has an independent FIFO buffer...DFRobot Gravity - adapter with compression connectors
Universal adapter for sensors with 3-pin clamp connector. It can be used with digital and analog modules. The module has a built-in resistor of 10K between AB and AC, which...DFRobot Gravity - module with multiturn potentiometer 10kΞ©/10obr.
The DFRobot module with 10-turn potentiometer with the resistance of 10 kΞ©. The kit also includes a cable with a female connector, pitch of 2.54 mm.DFrobot Gravity - Carbon Dioxide Sensor CO2 IR V2.0 - analog
High-precision sensor that measures the concentration of CO2 (carbon dioxide) in the air. Equipped with analog output, works with a voltage 5 V. Operates in the range from 400...DFRobot Gravity - BME280 humidity, temperature and pressure sensor 110kPa I2C / SPI 3-5V
The DFRobot module is equipped with a sensor of humidity, temperature and pressure, powered with the voltage from 3.3 V to 5 V with the I2C and SPI interface. Measuring range:...- Reduced price
- Promotion
Gravity - pH analog sensor/meter V2 - DFRobot SEN0161-V2
pH sensor / meter with analogue output. Allows to test the level of acidity and alkalinity of aqueous solutions . It has an accuracy of +/- 0.1 pH, which is sufficient for...DFRobot Gravity - digital barometer, pressure and altitude sensor 1250hPa I2C/SPI 3,3-5,5V
Module with digital barometer from Bosch BMP388. The measurement range is from 300 hPa to 1250 hPa relative accuracy of 8 Pa on approx. 0.5 m of altitude. The system is...DFRobot Gravity: Analog Heart Rate Monitor Sensor (ECG) For Arduino
Module for measuring heart rate of the human heart, compatible with Arduino. It works with voltage from 3.3 V to 6 V, the output is the analog signal. The kit includes a probe,...Gravity: Offline Language Learning Voice Recognition Sensor - I2C & UART - DFRobot SEN0539-EN
The voice recognition module - Gravity Offline Language Learning Voice Recognition Sensor - allows you to recognize 121 voice commands saved in memory, as well as expand...DFRobot Gravity - RTC SD2405 I2C - real time clock module
Module with real time clock SD2405 has a dual power supply system, when there is a lack of the main power supply, the module automatically switches to battery power.DFRobot Gravity - analogue meter of the sound level
The sound level meter is compatible with Arduino. For measurements, it uses the circuit instrument and the microphone with a low noise level that allows to accurately measure...DFRobot Gravity - 12-position rotary switch V1
The module is equipped with 12-state rotary switch. It is powered with the voltage from 3.3 V to 12 V. The switch uses analog input for reading the output status, which allows...DFRobot Gravity - pH analog sensor/meter Pro V2
The analog PH pro V2 sensor enables the measurement of solution PH , acidity or alkalinity. It is equipped with an industrial electrode with long life and simple connection...DFRobot Gravity - digital crash sensor (left)
The module is equipped with limit switch with lever with roller is designed for Arduino. It is supplied with the voltage of 5 V.DFRobot Gravity converter prΔ dowo current-voltage 0-25/0,3V
Module from the Gravity series enables the processing of the current signal from 0 mA to 25 mA into a voltage signal from 0 V to 3V. The sensor may be connected to the...DFRobot Gravity - I2C battery charge level meter
A module designed for reading the Li-Pol 3.7 V battery charge level in real-time. It is also equipped with alarm function when the battery level is low, or when battery power...See also
- Piezoelectric sensors
- RPM sensors
- Twilight sensors
- Tilt sensors
- Accelerometers
- Inductive sensors
- Hall effect sensors
- Oxygen sensors
- Optical sensors
- Resistance sensors
- Door sensors
- Alarm sensors
- 9DoF IMU sensors
- Pressure sensors
- Air quality sensors
- Sound sensors
- Gesture sensors
- Gas sensors
- Limit switches
- Sensors of light and color
- Magnetic sensors
- Medical sensors
- Pressure sensors
- Sensors odbiciowe
- Distance sensors
- Inductive contactless sensors
- Weather sensors
- Liquid level sensors
- Current sensors
- Flow sensors
- Motion sensors
- Temperature sensors
- PT100 temperature probes
- Humidity sensors
- Fingerprint readers
- Encoders
- Photoresistors
- Phototransistors
- IR receivers
- Magnetometers
- Gyros
- Sensor sets
- Grove modules